The main motivation of this commit is to add a `page.Page` interface to replace the very file-oriented `hugolib.Page` struct.
This is all a preparation step for issue #5074, "pages from other data sources".
But this also fixes a set of annoying limitations, especially related to custom output formats, and shortcodes.
Most notable changes:
* The inner content of shortcodes using the `{{%` as the outer-most delimiter will now be sent to the content renderer, e.g. Blackfriday.
This means that any markdown will partake in the global ToC and footnote context etc.
* The Custom Output formats are now "fully virtualized". This removes many of the current limitations.
* The taxonomy list type now has a reference to the `Page` object.
This improves the taxonomy template `.Title` situation and make common template constructs much simpler.
See #5074Fixes#5763Fixes#5758Fixes#5090Fixes#5204Fixes#4695Fixes#5607Fixes#5707Fixes#5719Fixes#3113Fixes#5706Fixes#5767Fixes#5723Fixes#5769Fixes#5770Fixes#5771Fixes#5759Fixes#5776Fixes#5777Fixes#5778
This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are:
* A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`.
* A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable.
If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates.
Given the example tree below:
If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`).
```bash
config
├── _default
│ ├── config.toml
│ ├── languages.toml
│ ├── menus
│ │ ├── menus.en.toml
│ │ └── menus.zh.toml
│ └── params.toml
├── development
│ └── params.toml
└── production
├── config.toml
└── params.toml
```
Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`.
Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization.
We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed.
Fixes#5422
This means that the current `.Site` and ´.Hugo` is available as a globals, so you can do `site.IsServer`, `hugo.Version` etc.
Fixes#5470Fixes#5467Fixes#5503
`*json.UnmarshalTypeError` and `*json.SyntaxError` has a byte `Offset`, so use that.
This commit also reworks/simplifies the errror line matching logic. This also makes the file reading unbuffered, but that should be fine in this error case.
See #5324
We do that by re-render visited pages that is not already in the stack. This may potentially do some double work, but that small penalty should be well worth it.
Fixes#5281
The main item in this commit is showing of errors with a file context when running `hugo server`.
This can be turned off: `hugo server --disableBrowserError` (can also be set in `config.toml`).
But to get there, the error handling in Hugo needed a revision. There are some items left TODO for commits soon to follow, most notable errors in content and config files.
Fixes#5284Fixes#5290
See #5325
See #5324
Given this content:
```bash
archetypes
├── default.md
└── post-bundle
├── bio.md
├── images
│ └── featured.jpg
└── index.md
```
```bash
hugo new --kind post-bundle post/my-post
```
Will create a new folder in `/content/post/my-post` with the same set of files as in the `post-bundle` archetypes folder.
This commit also improves the archetype language detection, so, if you use template code in your content files, the `.Site` you get is for the correct language. This also means that it is now possible to translate strings defined in the `i18n` bundles, e.g. `{{ i18n "hello" }}`.
Fixes#4535
Before this commit, the live reload logic in `hugo server` got confused when you dropped a new bundle into the project while the server was running. The workaround was to restart the server.
This commit fixes the "live reload bundle detection" in server mode, and also makes sure that the bundle headers are always processed first.
Fixes#5075
Hugo Pipes added minification support for resources fetched via ´resources.Get` and similar.
This also adds support for minification of the final output for supported output formats: HTML, XML, SVG, CSS, JavaScript, JSON.
To enable, run Hugo with the `--minify` flag:
```bash
hugo --minify
```
This commit is also a major spring cleaning of the `transform` package to allow the new minification step fit into that processing chain.
Fixes#1251
Two new settings:
* refLinksErrorLevel: ERROR (default) or WARNING. ERROR will fail the build.
* refLinksNotFoundURL: Used as a placeholder when page references cannot be found.
Fixes#4964
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes#4381Fixes#4903Fixes#4858
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes#4460Fixes#4450
There have been one report of a site with truncated `.Content` after the Hugo `0.40.1` release.
This commit fixes this so that race should not be possible anymore. It also adds a stress test with focus on content rendering and multiple output formats.
Fixes#4706
This is a follow-up to #4632. There were some assumptions in that implementation that did not hold water in all situations.
This commit simplifies the content lazy initalization making it more robust.
Fixes#4664
In most cases we could delay the content init until rendering time, but there could be use cases where the templates would depend on state set in the shortcodes (.Page.Scratch.Set), so we need to do this early.
See #4632
This resolves some surprising behaviour when reading other pages' content from shortcodes. Before this commit, that behaviour was undefined. Note that this has never been an issue from regular templates.
It will still not be possible to get **the current shortcode's page's rendered content**. That would have impressed Einstein.
The new and well defined rules are:
* `.Page.Content` from a shortcode will be empty. The related `.Page.Truncated` `.Page.Summary`, `.Page.WordCount`, `.Page.ReadingTime`, `.Page.Plain` and `.Page.PlainWords` will also have empty values.
* For _other pages_ (retrieved via `.Page.Site.GetPage`, `.Site.Pages` etc.) the `.Content` is there to use as you please as long as you don't have infinite content recursion in your shortcode/content setup. See below.
* `.Page.TableOfContents` is good to go (but does not support shortcodes in headlines; this is unchanged)
If you get into a situation of infinite recursion, the `.Content` will be empty. Run `hugo -v` for more information.
Fixes#4632Fixes#4653Fixes#4655
For the content from other pages in shortcodes there are some chicken and
egg dependencies that is hard to get around. But we can improve on this by preparing the pages in a certain order:
1. The headless bundles goes first. These are page typically page and image collections..
2. Leaf bundles
3. Regular single pages
4. Branch bundles
Fixes#4632
A sample config:
```toml
defaultContentLanguage = "en"
defaultContentLanguageInSubdir = true
[Languages]
[Languages.en]
weight = 10
title = "In English"
languageName = "English"
contentDir = "content/english"
[Languages.nn]
weight = 20
title = "På Norsk"
languageName = "Norsk"
contentDir = "content/norwegian"
```
The value of `contentDir` can be any valid path, even absolute path references. The only restriction is that the content dirs cannot overlap.
The content files will be assigned a language by
1. The placement: `content/norwegian/post/my-post.md` will be read as Norwegian content.
2. The filename: `content/english/post/my-post.nn.md` will be read as Norwegian even if it lives in the English content folder.
The content directories will be merged into a big virtual filesystem with one simple rule: The most specific language file will win.
This means that if both `content/norwegian/post/my-post.md` and `content/english/post/my-post.nn.md` exists, they will be considered duplicates and the version inside `content/norwegian` will win.
Note that translations will be automatically assigned by Hugo by the content file's relative placement, so `content/norwegian/post/my-post.md` will be a translation of `content/english/post/my-post.md`.
If this does not work for you, you can connect the translations together by setting a `translationKey` in the content files' front matter.
Fixes#4523Fixes#4552Fixes#4553
This commit adds support for `headless bundles` for the `index` bundle type.
So:
```toml
headless = true
```
In front matter means that
* It will have no `Permalink` and no rendered HTML in /public
* It will not be part of `.Site.RegularPages` etc.
But you can get it by:
* `.Site.GetPage ...`
The use cases are many:
* Shared media galleries
* Reusable page content "snippets"
* ...
Fixes#4311
* We match by path vs taxonomy to determine if we have a content page for that taxonomy
* The taxonomy name is (if `preserveTaxonomyNames` is not set) normalized to `maxmustermann` while you have the disk folder called `MaxMustermann`.
* This isn't a new issue, but I suspect most people will just name the folder `authors/maxmustermann` and it will just work.
* The inconsistent behaviour you see here is that you will end up with two pages with the same target filename, so it is a little random who will win.
This fixes that by also normalizing the taxonomy path when doing the comparison.
Fixes#4238
This commit is not the smallest in Hugo's history.
Some hightlights include:
* Page bundles (for complete articles, keeping images and content together etc.).
* Bundled images can be processed in as many versions/sizes as you need with the three methods `Resize`, `Fill` and `Fit`.
* Processed images are cached inside `resources/_gen/images` (default) in your project.
* Symbolic links (both files and dirs) are now allowed anywhere inside /content
* A new table based build summary
* The "Total in nn ms" now reports the total including the handling of the files inside /static. So if it now reports more than you're used to, it is just **more real** and probably faster than before (see below).
A site building benchmark run compared to `v0.31.1` shows that this should be slightly faster and use less memory:
```bash
▶ ./benchSite.sh "TOML,num_langs=.*,num_root_sections=5,num_pages=(500|1000),tags_per_page=5,shortcodes,render"
benchmark old ns/op new ns/op delta
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 101785785 78067944 -23.30%
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 185481057 149159919 -19.58%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 103149918 85679409 -16.94%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 203515478 169208775 -16.86%
benchmark old allocs new allocs delta
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 532464 391539 -26.47%
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 1056549 772702 -26.87%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 555974 406630 -26.86%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 1086545 789922 -27.30%
benchmark old bytes new bytes delta
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 53243246 43598155 -18.12%
BenchmarkSiteBuilding/TOML,num_langs=1,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 105811617 86087116 -18.64%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=500,tags_per_page=5,shortcodes,render-4 54558852 44545097 -18.35%
BenchmarkSiteBuilding/TOML,num_langs=3,num_root_sections=5,num_pages=1000,tags_per_page=5,shortcodes,render-4 106903858 86978413 -18.64%
```
Fixes#3651Closes#3158Fixes#1014Closes#2021Fixes#1240
Updates #3757
This commit adds support for multiple statDirs both on the global and language level.
A simple `config.toml` example:
```bash
staticDir = ["static1", "static2"]
[languages]
[languages.no]
staticDir = ["staticDir_override", "static_no"]
baseURL = "https://example.no"
languageName = "Norsk"
weight = 1
title = "På norsk"
[languages.en]
staticDir2 = "static_en"
baseURL = "https://example.com"
languageName = "English"
weight = 2
title = "In English"
```
In the above, with no theme used:
the English site will get its static files as a union of "static1", "static2" and "static_en". On file duplicates, the right-most version will win.
the Norwegian site will get its static files as a union of "staticDir_override" and "static_no".
This commit also concludes the Multihost support in #4027.
Fixes#36Closes#4027
Hugo already, in its server mode, support partial rebuilds. To put it simply: If you change `about.md`, only that content page is read and processed, then Hugo does some processing (taxonomies etc.) and the full site is rendered.
This commit covers the rendering part: We now only re-render the pages you work on, i.e. the last n pages you watched in the browser (which obviously also includes the page in the example above).
To be more specific: When you are running the hugo server in watch (aka. livereload) mode, and change a template or a content file, then we do a partial re-rendering of the following:
* The current content page (if it is a content change)
* The home page
* Up to the last 10 pages you visited on the site.
This should in most cases be enough, but if you navigate to something completely different, you may see stale content. Doing an edit will then refresh that page.
Note that this feature is enabled by default. To turn it off, run `hugo server --disableFastRender`.
Fixes#3962
See #1643
