The gain, given the "real sites benchmark" below, is obvious:
```
benchmark old ns/op new ns/op delta
BenchmarkHugo-4 14497594101 13084156335 -9.75%
benchmark old allocs new allocs delta
BenchmarkHugo-4 57404335 48282002 -15.89%
benchmark old bytes new bytes delta
BenchmarkHugo-4 9933505624 9721984424 -2.13%
```
Fixes#2495
Maps in Viper, Hugo's config backing store, is now properly lower-cased not just on top level, the current situation.
While this is mostly a good thing, as you don't need to know the original casing to look up a value, it will be breaking for people doing direct lookups in the ´Site.Params` map.
We will try to find a solution to this "breakage", but the recommended method to get params values is via the `.Param` methods.
This method is now implemented on `Node`, `Page` and `Site` and is case-insensitive:
* Use `.Param "someKey" ` if you want page param with fall back to site param if not found on page.
* Use `.Site.Param "someKey"` to get a site param
See #2590
There were some breaking changes etc. that is too late to fix for 0.17.
Let us think this through and add proper author support for Hugo 0.18.
Fixes#2464
Revert "docs: Add documentation for author profiles"
This reverts commit b6673e5309.
Revert "Add First Class Author Support"
This reverts commit cf978c0649.
In a multi-language setup, before this commit the Node's Translations() method
would return some "dummy nodes" that would point to the correct page (Permalink),
but would not be the same as the node it points to -- it would not have the translated
title etc.
The node creation is, however, so mingled with rendering, whihc is too early to have any global state,
so the nodes has to be split in a prepare and a render phase. This commits does that with as small
a change as possible. This implementation is a temp solution until we fix#2297.
Updates #2309
The current "rendering language" is needed outside of Site. This commit moves the Language type to the helpers package, and then used to get correct correct language configuration in the markdownify template func.
This commit also adds two new template funcs: relLangURL and absLangURL.
See #2309
And in the same go adjusted some minor parts of the language API:
Add LanguagePrefix alias to Node and rename the Multilingual config section to Languages.
See #2309
Work In Progress!
This commit makes a rework of the build and rebuild process to better suit a multi-site setup.
This also includes a complete overhaul of the site tests. Previous these were a messy mix that
were testing just small parts of the build chain, some of it testing code-paths not even used in
"real life". Now all tests that depends on a built site follows the same and real production code path.
See #2309Closes#2211Closes#477Closes#1744
This commit also consolidates URLs on Node vs Page, so now .Permalink should be interoperable.
Note that this implementations should be fairly short-livded, waiting for #2297, but the API should be stable.
To determine if a page is the "Home Page" has inspired lots of creativity in the template department.
This commit makes it simpler: IsHome will tell the truth.
Create new field in Node
Update Page to look for lastmod field in the front matter. If not present, then assign Date to Lastmod
Update Site, to assign a value to Lastmod (based on the same logic used for Date)
Fixes#733
Pretty sure it has worked at some point, but that PR probably has been rebased to pieces.
This refactors the fix by @dannys42 into a method, as this URL fix is applied several places.
Fixes#1114
Thanks to @bep's new, brilliant helpers.Deprecated() function,
the following functions or variables are transitioned to their
new names, preserving backward compatibility for v0.14
and warning the user of upcoming obsolescence in v0.15:
* .Url → .URL (for node, menu and paginator)
* .Site.BaseUrl → .Site.BaseURL
* .Site.Indexes → .Site.Taxonomies
* .Site.Recent → .Site.Pages
* getJson → getJSON
* getCsv → getCSV
* safeHtml → safeHTML
* safeCss → safeCSS
* safeUrl → safeURL
Also fix related initialisms in strings and comments.
Continued effort in fixing #959.
First step to use initialisms that golint suggests,
for example:
Line 116: func GetHtmlRenderer should be GetHTMLRenderer
as see on http://goreportcard.com/report/spf13/hugo
Thanks to @bep for the idea!
Note that command-line flags (cobra and pflag)
as well as struct fields like .BaseUrl and .Url
that are used in Go HTML templates need more work
to maintain backward-compatibility, and thus
are NOT yet dealt with in this commit.
First step in fixing #959.
The variable scope in the Go templates makes it hard, if possible at all, to write templates with counter variables or similar state.
This commit fixes that by adding a writable context to Node, backed by a map: Scratch.
This context has three methods, Get, Set and Add. The Add is tailored for counter variables, but can be used for any built-in numeric values or strings.
Two new configuration properties, `Paginate` (default `0`) and `PaginatePath` (default `page`) are added.
Setting `paginate` to a positive value will split the list pages for the home page, sections and taxonomies into chunks of size of the `paginate` property.
A `.Paginator` is provided to help building a pager menu.
There are two ways to configure a `.Paginator`:
1. The simplest way is just to call `.Paginator.Pages` from a template. It will contain the pages for "that page" (`.Data.Pages` will (like today) contain all the pages).
2. Select a sub-set of the pages with the available template functions and pass the slice to `.Paginate` : `{{ range (.Paginate (where .Data.Pages "Type" "post")).Pages }}`
**NOTE:** For a given Node, it's one of the options above. It's perfectly legitimate to iterate over the same pager more than once, but it's static and cannot change.
The `.Paginator` contains enough information to build a full-blown paginator interface.
The pages are built on the form (note: BLANK means no value, i.e. home page):
```
[SECTION/TAXONOMY/BLANK]/index.html
[SECTION/TAXONOMY/BLANK]/page/1/index.html => redirect to [SECTION/TAXONOMY/BLANK]/index.html
[SECTION/TAXONOMY/BLANK]/page/2/index.html
....
```
Fixes#96
canonifyUrls=true, RelPermalink and baseUrl with sub-path did not work.
This fixes that by adding a check for canonifyUrl=trues=true in RelPermalink().
So given
- baseUrl "http://somehost.com/sub/"
- the path "some-path/file.html"
For canonifyUrls=false RelPermalink() returns "/sub/some-path/file.html"
For canonifyUrls=true RelPermalink() returns "/some-path/file.html"
In the last case, the Url will be made absolute and clickable in a later step.
This commit also makes the menu urls defined in site config releative. To make them work with canonifying of urls, the context root is prepended if canonifying is turned off.
Fixes#519Fixes#711
Added Version, CommitHash and BuildDate to hugolib/hugo.go and used it in build
Removed commitHash and buildDate from commands/version.go and used hugolib vars
Removed getDateFormat function from commands/version.go
Conflicts:
README.md
docs/content/templates/variables.md
- `.Ref` and `.RelRef` take a reference (the logical filename for a
page, including extension and/or a document fragment ID) and return
a permalink (or relative permalink) to the referenced document.
- If the reference is a page name (such as `about.md`), the page
will be discovered and the permalink will be returned: `/about/`
- If the reference is a page name with a fragment (such as
`about.md#who`), the page will be discovered and used to add the
`page.UniqueID()` to the resulting fragment and permalink:
`/about/#who:deadbeef`.
- If the reference is a fragment and `.*Ref` has been called from
a `Node` or `SiteInfo`, it will be returned as is: `#who`.
- If the reference is a fragment and `.*Ref` has been called from
a `Page`, it will be returned with the page’s unique ID:
`#who:deadbeef`.
- `.*Ref` can be called from either `Node`, `SiteInfo` (e.g.,
`Node.Site`), `Page` objects, or `ShortcodeWithPage` objects in
templates.
- `.*Ref` cannot be used in content, so two shortcodes have been
created to provide the functionality to content: `ref` and `relref`.
These are intended to be used within markup, like `[Who]({{% ref
about.md#who %}})` or `<a href="{{% ref about.md#who %}}">Who</a>`.
- There are also `ref` and `relref` template functions (used to create
the shortcodes) that expect a `Page` or `Node` object and the
reference string (e.g., `{{ relref . "about.md" }}` or `{{
"about.md" | ref . }}`). It actually looks for `.*Ref` as defined on
`Node` or `Page` objects.
- Shortcode handling had to use a *differently unique* wrapper in
`createShortcodePlaceholder` because of the way that the `ref` and
`relref` are intended to be used in content.
Prior to this commit, `HasMenuCurrent` and `IsMenuCurrent` on `Node` always returned false.
This made it hard (if possible at all) to mark the currently selected menu item/group for non-Page content (home page, category pages etc.), i.e. for menus defined in the site configuration.
This commit provides an implementation of these two methods.
Notable design choices:
* These menu items have a loose coupling to the the resources they navigate to; the `Url` is the best common identificator. To facilitate a consistent matching, and to get it in line with the menu items connected to `Page`, relative Urls (Urls starting with '/') for menu items in the site configuration are converted to permaLinks using the same rules used for others’.
* `IsMenuCurrent` only looks at the children of the current node; this is in line with the implementation on `Page`.
* Due to this loose coupling, `IsMenuCurrent` have to search downards in the tree to make sure that the node is inside the current menu. This could have been made simpler if it could answer `yes` to any match of any menu item matching the current resource.
This commit also adds a set of unit tests for the menu system.
Fixes#367
