Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// Copyright 2019 The Hugo Authors. All rights reserved.
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
package hugofs
|
|
|
|
|
|
|
|
import (
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
"fmt"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
"os"
|
|
|
|
"path/filepath"
|
|
|
|
"strings"
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
"github.com/gohugoio/hugo/hugofs/files"
|
|
|
|
|
|
|
|
"github.com/pkg/errors"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2019-08-03 11:27:40 -04:00
|
|
|
radix "github.com/armon/go-radix"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
"github.com/spf13/afero"
|
|
|
|
)
|
|
|
|
|
|
|
|
var filepathSeparator = string(filepath.Separator)
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// NewRootMappingFs creates a new RootMappingFs on top of the provided with
|
|
|
|
// of root mappings with some optional metadata about the root.
|
|
|
|
// Note that From represents a virtual root that maps to the actual filename in To.
|
|
|
|
func NewRootMappingFs(fs afero.Fs, rms ...RootMapping) (*RootMappingFs, error) {
|
2019-08-03 11:27:40 -04:00
|
|
|
rootMapToReal := radix.New()
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
for _, rm := range rms {
|
|
|
|
(&rm).clean()
|
|
|
|
|
|
|
|
fromBase := files.ResolveComponentFolder(rm.From)
|
|
|
|
if fromBase == "" {
|
|
|
|
panic("unrecognised component folder in" + rm.From)
|
|
|
|
}
|
|
|
|
|
|
|
|
if len(rm.To) < 2 {
|
|
|
|
panic(fmt.Sprintf("invalid root mapping; from/to: %s/%s", rm.From, rm.To))
|
|
|
|
}
|
|
|
|
|
|
|
|
_, err := fs.Stat(rm.To)
|
|
|
|
if err != nil {
|
|
|
|
if os.IsNotExist(err) {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
// Extract "blog" from "content/blog"
|
|
|
|
rm.path = strings.TrimPrefix(strings.TrimPrefix(rm.From, fromBase), filepathSeparator)
|
|
|
|
|
2019-08-03 11:27:40 -04:00
|
|
|
key := rm.rootKey()
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
var mappings []RootMapping
|
|
|
|
v, found := rootMapToReal.Get(key)
|
|
|
|
if found {
|
|
|
|
// There may be more than one language pointing to the same root.
|
|
|
|
mappings = v.([]RootMapping)
|
|
|
|
}
|
|
|
|
mappings = append(mappings, rm)
|
|
|
|
rootMapToReal.Insert(key, mappings)
|
|
|
|
}
|
|
|
|
|
|
|
|
rfs := &RootMappingFs{Fs: fs,
|
|
|
|
virtualRoots: rms,
|
2019-08-03 11:27:40 -04:00
|
|
|
rootMapToReal: rootMapToReal}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
return rfs, nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// NewRootMappingFsFromFromTo is a convenicence variant of NewRootMappingFs taking
|
|
|
|
// From and To as string pairs.
|
|
|
|
func NewRootMappingFsFromFromTo(fs afero.Fs, fromTo ...string) (*RootMappingFs, error) {
|
|
|
|
rms := make([]RootMapping, len(fromTo)/2)
|
|
|
|
for i, j := 0, 0; j < len(fromTo); i, j = i+1, j+2 {
|
|
|
|
rms[i] = RootMapping{
|
|
|
|
From: fromTo[j],
|
|
|
|
To: fromTo[j+1],
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return NewRootMappingFs(fs, rms...)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
type RootMapping struct {
|
|
|
|
From string
|
|
|
|
To string
|
|
|
|
|
|
|
|
path string // The virtual mount point, e.g. "blog".
|
|
|
|
Meta FileMeta // File metadata (lang etc.)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (rm *RootMapping) clean() {
|
2019-07-30 12:34:41 -04:00
|
|
|
rm.From = strings.Trim(filepath.Clean(rm.From), filepathSeparator)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
rm.To = filepath.Clean(rm.To)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (r RootMapping) filename(name string) string {
|
2019-07-30 12:34:41 -04:00
|
|
|
if name == "" {
|
|
|
|
return r.To
|
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
return filepath.Join(r.To, strings.TrimPrefix(name, r.From))
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (r RootMapping) rootKey() string {
|
|
|
|
return r.From
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// A RootMappingFs maps several roots into one. Note that the root of this filesystem
|
|
|
|
// is directories only, and they will be returned in Readdir and Readdirnames
|
|
|
|
// in the order given.
|
|
|
|
type RootMappingFs struct {
|
|
|
|
afero.Fs
|
2019-08-03 11:27:40 -04:00
|
|
|
rootMapToReal *radix.Tree
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
virtualRoots []RootMapping
|
|
|
|
filter func(r RootMapping) bool
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (fs *RootMappingFs) Dirs(base string) ([]FileMetaInfo, error) {
|
|
|
|
roots := fs.getRootsWithPrefix(base)
|
|
|
|
|
|
|
|
if roots == nil {
|
|
|
|
return nil, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
fss := make([]FileMetaInfo, len(roots))
|
|
|
|
for i, r := range roots {
|
|
|
|
bfs := afero.NewBasePathFs(fs.Fs, r.To)
|
|
|
|
bfs = decoratePath(bfs, func(name string) string {
|
|
|
|
p := strings.TrimPrefix(name, r.To)
|
|
|
|
if r.path != "" {
|
|
|
|
// Make sure it's mounted to a any sub path, e.g. blog
|
|
|
|
p = filepath.Join(r.path, p)
|
|
|
|
}
|
|
|
|
p = strings.TrimLeft(p, filepathSeparator)
|
|
|
|
return p
|
|
|
|
})
|
|
|
|
fs := decorateDirs(bfs, r.Meta)
|
|
|
|
fi, err := fs.Stat("")
|
|
|
|
if err != nil {
|
|
|
|
return nil, errors.Wrap(err, "RootMappingFs.Dirs")
|
|
|
|
}
|
|
|
|
fss[i] = fi.(FileMetaInfo)
|
|
|
|
}
|
|
|
|
|
|
|
|
return fss, nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// LstatIfPossible returns the os.FileInfo structure describing a given file.
|
|
|
|
func (fs *RootMappingFs) LstatIfPossible(name string) (os.FileInfo, bool, error) {
|
2019-07-30 12:34:41 -04:00
|
|
|
fis, _, b, err := fs.doLstat(name, false)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if err != nil {
|
|
|
|
return nil, b, err
|
|
|
|
}
|
|
|
|
return fis[0], b, nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (fs *RootMappingFs) virtualDirOpener(name string, isRoot bool) func() (afero.File, error) {
|
|
|
|
return func() (afero.File, error) { return &rootMappingFile{name: name, isRoot: isRoot, fs: fs}, nil }
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
func (fs *RootMappingFs) doLstat(name string, allowMultiple bool) ([]FileMetaInfo, []FileMetaInfo, bool, error) {
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
if fs.isRoot(name) {
|
2019-07-30 12:34:41 -04:00
|
|
|
return []FileMetaInfo{newDirNameOnlyFileInfo(name, true, fs.virtualDirOpener(name, true))}, nil, false, nil
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
roots := fs.getRoots(name)
|
2019-07-30 12:34:41 -04:00
|
|
|
rootsWithPrefix := fs.getRootsWithPrefix(name)
|
|
|
|
hasRootMappingsBelow := len(rootsWithPrefix) != 0
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if len(roots) == 0 {
|
2019-07-30 12:34:41 -04:00
|
|
|
if hasRootMappingsBelow {
|
|
|
|
// No exact matches, but we have root mappings below name,
|
|
|
|
// let's make it look like a directory.
|
|
|
|
return []FileMetaInfo{newDirNameOnlyFileInfo(name, true, fs.virtualDirOpener(name, false))}, nil, false, nil
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
return nil, nil, false, os.ErrNotExist
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
// We may have a mapping for both static and static/subdir.
|
|
|
|
// These will not show in any Readdir so append them
|
|
|
|
// manually.
|
|
|
|
rootsInDir := fs.filterRootsBelow(rootsWithPrefix, name)
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
var (
|
|
|
|
fis []FileMetaInfo
|
2019-07-30 12:34:41 -04:00
|
|
|
dirs []FileMetaInfo
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
b bool
|
|
|
|
root RootMapping
|
|
|
|
err error
|
|
|
|
)
|
|
|
|
|
|
|
|
for _, root = range roots {
|
2019-10-31 06:13:14 -04:00
|
|
|
var fi os.FileInfo
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fi, b, err = fs.statRoot(root, name)
|
|
|
|
if err != nil {
|
|
|
|
if os.IsNotExist(err) {
|
|
|
|
continue
|
|
|
|
}
|
2019-07-30 12:34:41 -04:00
|
|
|
return nil, nil, false, err
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
fim := fi.(FileMetaInfo)
|
|
|
|
fis = append(fis, fim)
|
|
|
|
}
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
for _, root = range rootsInDir {
|
|
|
|
fi, _, err := fs.statRoot(root, "")
|
|
|
|
if err != nil {
|
|
|
|
if os.IsNotExist(err) {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
return nil, nil, false, err
|
|
|
|
}
|
|
|
|
fim := fi.(FileMetaInfo)
|
|
|
|
dirs = append(dirs, fim)
|
|
|
|
}
|
|
|
|
|
|
|
|
if len(fis) == 0 && len(dirs) == 0 {
|
|
|
|
return nil, nil, false, os.ErrNotExist
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if allowMultiple || len(fis) == 1 {
|
2019-07-30 12:34:41 -04:00
|
|
|
return fis, dirs, b, nil
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
2019-10-31 06:13:14 -04:00
|
|
|
if len(fis) == 0 {
|
|
|
|
return nil, nil, false, os.ErrNotExist
|
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// Open it in this composite filesystem.
|
|
|
|
opener := func() (afero.File, error) {
|
|
|
|
return fs.Open(name)
|
|
|
|
}
|
|
|
|
|
2019-10-31 06:13:14 -04:00
|
|
|
return []FileMetaInfo{decorateFileInfo(fis[0], fs, opener, "", "", root.Meta)}, nil, b, nil
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// Open opens the namedrootMappingFile file for reading.
|
|
|
|
func (fs *RootMappingFs) Open(name string) (afero.File, error) {
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
if fs.isRoot(name) {
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
return &rootMappingFile{name: name, fs: fs, isRoot: true}, nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
2018-10-22 10:47:23 -04:00
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
fis, dirs, _, err := fs.doLstat(name, true)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
2018-10-22 10:47:23 -04:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if len(fis) == 1 {
|
|
|
|
fi := fis[0]
|
|
|
|
meta := fi.(FileMetaInfo).Meta()
|
|
|
|
f, err := meta.Open()
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2019-07-30 12:34:41 -04:00
|
|
|
|
|
|
|
f = &rootMappingFile{File: f, fs: fs, name: name, meta: meta}
|
|
|
|
|
|
|
|
if len(dirs) > 0 {
|
|
|
|
return &readDirDirsAppender{File: f, dirs: dirs}, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
return f, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
f, err := fs.newUnionFile(fis...)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
if len(dirs) > 0 {
|
|
|
|
return &readDirDirsAppender{File: f, dirs: dirs}, nil
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
return f, nil
|
2018-10-22 10:47:23 -04:00
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// Stat returns the os.FileInfo structure describing a given file. If there is
|
|
|
|
// an error, it will be of type *os.PathError.
|
|
|
|
func (fs *RootMappingFs) Stat(name string) (os.FileInfo, error) {
|
|
|
|
fi, _, err := fs.LstatIfPossible(name)
|
|
|
|
return fi, err
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
// Filter creates a copy of this filesystem with the applied filter.
|
|
|
|
func (fs RootMappingFs) Filter(f func(m RootMapping) bool) *RootMappingFs {
|
|
|
|
fs.filter = f
|
|
|
|
return &fs
|
|
|
|
}
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
func (fs *RootMappingFs) isRoot(name string) bool {
|
|
|
|
return name == "" || name == filepathSeparator
|
|
|
|
|
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (fs *RootMappingFs) getRoots(name string) []RootMapping {
|
2019-08-03 11:27:40 -04:00
|
|
|
name = filepath.Clean(name)
|
|
|
|
_, v, found := fs.rootMapToReal.LongestPrefix(name)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if !found {
|
|
|
|
return nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
rm := v.([]RootMapping)
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
return fs.applyFilterToRoots(rm)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (fs *RootMappingFs) applyFilterToRoots(rm []RootMapping) []RootMapping {
|
|
|
|
if fs.filter == nil {
|
|
|
|
return rm
|
|
|
|
}
|
|
|
|
|
|
|
|
var filtered []RootMapping
|
|
|
|
for _, m := range rm {
|
|
|
|
if fs.filter(m) {
|
|
|
|
filtered = append(filtered, m)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
return filtered
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
func (fs *RootMappingFs) getRootsWithPrefix(prefix string) []RootMapping {
|
|
|
|
if fs.isRoot(prefix) {
|
|
|
|
return fs.virtualRoots
|
|
|
|
}
|
2019-08-03 11:27:40 -04:00
|
|
|
prefix = filepath.Clean(prefix)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
var roots []RootMapping
|
|
|
|
|
2019-08-03 11:27:40 -04:00
|
|
|
fs.rootMapToReal.WalkPrefix(prefix, func(b string, v interface{}) bool {
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
roots = append(roots, v.([]RootMapping)...)
|
|
|
|
return false
|
|
|
|
})
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
return fs.applyFilterToRoots(roots)
|
|
|
|
}
|
|
|
|
|
|
|
|
// Filter out the mappings inside the name directory.
|
|
|
|
func (fs *RootMappingFs) filterRootsBelow(roots []RootMapping, name string) []RootMapping {
|
|
|
|
if len(roots) == 0 {
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
sepCount := strings.Count(name, filepathSeparator)
|
|
|
|
var filtered []RootMapping
|
|
|
|
for _, x := range roots {
|
|
|
|
if name == x.From {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
|
|
|
|
if strings.Count(x.From, filepathSeparator)-sepCount != 1 {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
|
|
|
|
filtered = append(filtered, x)
|
|
|
|
|
|
|
|
}
|
|
|
|
return filtered
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
func (fs *RootMappingFs) newUnionFile(fis ...FileMetaInfo) (afero.File, error) {
|
|
|
|
meta := fis[0].Meta()
|
|
|
|
f, err := meta.Open()
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
rf := &rootMappingFile{File: f, fs: fs, name: meta.Name(), meta: meta}
|
|
|
|
if len(fis) == 1 {
|
|
|
|
return rf, err
|
|
|
|
}
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
next, err := fs.newUnionFile(fis[1:]...)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2018-10-22 10:47:23 -04:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
uf := &afero.UnionFile{Base: rf, Layer: next}
|
|
|
|
|
|
|
|
uf.Merger = func(lofi, bofi []os.FileInfo) ([]os.FileInfo, error) {
|
|
|
|
// Ignore duplicate directory entries
|
|
|
|
seen := make(map[string]bool)
|
|
|
|
var result []os.FileInfo
|
|
|
|
|
|
|
|
for _, fis := range [][]os.FileInfo{bofi, lofi} {
|
|
|
|
for _, fi := range fis {
|
|
|
|
|
|
|
|
if fi.IsDir() && seen[fi.Name()] {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
|
|
|
|
if fi.IsDir() {
|
|
|
|
seen[fi.Name()] = true
|
|
|
|
}
|
|
|
|
|
|
|
|
result = append(result, fi)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return result, nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
return uf, nil
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
func (fs *RootMappingFs) statRoot(root RootMapping, name string) (os.FileInfo, bool, error) {
|
|
|
|
filename := root.filename(name)
|
|
|
|
|
|
|
|
var b bool
|
|
|
|
var fi os.FileInfo
|
|
|
|
var err error
|
2018-10-22 10:47:23 -04:00
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
if ls, ok := fs.Fs.(afero.Lstater); ok {
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fi, b, err = ls.LstatIfPossible(filename)
|
|
|
|
if err != nil {
|
|
|
|
return nil, b, err
|
|
|
|
}
|
|
|
|
|
|
|
|
} else {
|
|
|
|
fi, err = fs.Fs.Stat(filename)
|
|
|
|
if err != nil {
|
|
|
|
return nil, b, err
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
// Opens the real directory/file.
|
|
|
|
opener := func() (afero.File, error) {
|
|
|
|
return fs.Fs.Open(filename)
|
|
|
|
}
|
|
|
|
|
|
|
|
if fi.IsDir() {
|
2019-07-30 12:34:41 -04:00
|
|
|
if name == "" {
|
|
|
|
name = root.From
|
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
_, name = filepath.Split(name)
|
|
|
|
fi = newDirNameOnlyFileInfo(name, false, opener)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
return decorateFileInfo(fi, fs.Fs, opener, "", "", root.Meta), b, nil
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
type rootMappingFile struct {
|
|
|
|
afero.File
|
|
|
|
fs *RootMappingFs
|
|
|
|
name string
|
|
|
|
meta FileMeta
|
|
|
|
isRoot bool
|
|
|
|
}
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
type readDirDirsAppender struct {
|
|
|
|
afero.File
|
|
|
|
dirs []FileMetaInfo
|
|
|
|
}
|
|
|
|
|
|
|
|
func (f *readDirDirsAppender) Readdir(count int) ([]os.FileInfo, error) {
|
|
|
|
fis, err := f.File.Readdir(count)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
for _, dir := range f.dirs {
|
|
|
|
fis = append(fis, dir)
|
|
|
|
}
|
|
|
|
return fis, nil
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
func (f *readDirDirsAppender) Readdirnames(count int) ([]string, error) {
|
|
|
|
fis, err := f.Readdir(count)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
return fileInfosToNames(fis), nil
|
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (f *rootMappingFile) Close() error {
|
|
|
|
if f.File == nil {
|
|
|
|
return nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
return f.File.Close()
|
|
|
|
}
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func (f *rootMappingFile) Name() string {
|
|
|
|
return f.name
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
func (f *rootMappingFile) Readdir(count int) ([]os.FileInfo, error) {
|
|
|
|
if f.File == nil {
|
|
|
|
dirsn := make([]os.FileInfo, 0)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
roots := f.fs.getRootsWithPrefix(f.name)
|
|
|
|
seen := make(map[string]bool)
|
|
|
|
|
|
|
|
j := 0
|
|
|
|
for _, rm := range roots {
|
|
|
|
if count != -1 && j >= count {
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
break
|
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
opener := func() (afero.File, error) {
|
|
|
|
return f.fs.Open(rm.From)
|
|
|
|
}
|
|
|
|
|
|
|
|
name := rm.From
|
|
|
|
if !f.isRoot {
|
|
|
|
_, name = filepath.Split(rm.From)
|
|
|
|
}
|
|
|
|
|
|
|
|
if seen[name] {
|
|
|
|
continue
|
|
|
|
}
|
|
|
|
seen[name] = true
|
|
|
|
|
|
|
|
j++
|
|
|
|
|
|
|
|
fi := newDirNameOnlyFileInfo(name, false, opener)
|
|
|
|
if rm.Meta != nil {
|
|
|
|
mergeFileMeta(rm.Meta, fi.Meta())
|
|
|
|
}
|
|
|
|
|
|
|
|
dirsn = append(dirsn, fi)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
return dirsn, nil
|
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
if f.File == nil {
|
|
|
|
panic(fmt.Sprintf("no File for %q", f.name))
|
|
|
|
}
|
|
|
|
|
|
|
|
fis, err := f.File.Readdir(count)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
|
|
|
|
|
|
|
for i, fi := range fis {
|
|
|
|
fis[i] = decorateFileInfo(fi, f.fs, nil, "", "", f.meta)
|
|
|
|
}
|
|
|
|
|
|
|
|
return fis, nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
func (f *rootMappingFile) Readdirnames(count int) ([]string, error) {
|
|
|
|
dirs, err := f.Readdir(count)
|
|
|
|
if err != nil {
|
|
|
|
return nil, err
|
|
|
|
}
|
2019-07-24 18:12:40 -04:00
|
|
|
return fileInfosToNames(dirs), nil
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|