Added medium syndication metadata

This commit is contained in:
Brandon Rozek 2023-02-18 21:37:22 -05:00
parent a51e20fbc7
commit a22bb998cb
14 changed files with 78 additions and 68 deletions

View file

@ -1,11 +1,14 @@
---
title: "Antenna Basics"
date: 2021-07-25T10:43:11-04:00
date: 2021-07-25 14:43:11
draft: false
tags: ["Amateur Radio"]
math: false
medium_enabled: true
medium_post_id: fdec15d43776
tags:
- Amateur Radio
title: Antenna Basics
---
When a radio wave hits an antenna, the electrical component of the wave induces a difference of potential in the conductor which gives rise to an electric current. This is called electromotive force. The current induced is normally small, therefore, we usually design antennas to be as efficient as possible.
Ways to increase efficiency:
@ -15,4 +18,3 @@ Ways to increase efficiency:
- Make the antenna resonant at the frequency you're interested in. You can do this by adjusting the length of the wire, inductance, capacitance.
- Design the antenna so that it focuses the energy from the direction you care about, as opposed to listening equally in all directions.
- Similarly, raise the antenna higher off the ground so that more of it's beam pattern reaches the horizon.

View file

@ -1,10 +1,11 @@
---
title: "Comparator Logic Gate"
date: 2021-06-18T01:09:45-04:00
date: 2021-06-18 05:09:45
draft: false
tags: []
math: true
medium_enabled: true
medium_post_id: 7bbc125ead40
tags: []
title: Comparator Logic Gate
---
This post is heavily derived from the Wikipedia post on [Digital Comparators](https://en.wikipedia.org/wiki/Digital_comparator) and therefore can be distributed under the Creative Commons Attribution-ShareAlike 3.0 license.

View file

@ -1,10 +1,11 @@
---
title: "Convert DJVU to PDF"
date: 2021-08-27T22:00:00-04:00
date: 2021-08-28 02:00:00
draft: false
tags: []
math: false
medium_enabled: true
medium_post_id: ddf23ae64f9a
tags: []
title: Convert DJVU to PDF
---
I've recently come across the DJVU file format before and needed to convert it to a PDF. The most reliable way I've found to do it is via the following command.
@ -43,4 +44,3 @@ fi
djvups "$1" | ps2pdf - "${1%.*}.pdf"
```

View file

@ -1,10 +1,11 @@
---
title: "Do-While Loop in Other Languages"
date: 2021-08-27T21:50:02-04:00
date: 2021-08-28 01:50:02
draft: false
tags: []
math: false
medium_enabled: true
medium_post_id: 5a9c792673f2
tags: []
title: Do-While Loop in Other Languages
---
Some languages like C, C++, and Java have a concept of a Do-While loop which normally look like the following:
@ -23,5 +24,3 @@ while condition or first_run:
first_run = False
statements
```

View file

@ -1,10 +1,12 @@
---
title: "Introduction to RF Power Amplifiers"
date: 2021-04-10T13:01:00-04:00
date: 2021-04-10 17:01:00
draft: false
tags: ["Amateur Radio"]
math: true
medium_enabled: true
medium_post_id: a8510ebe7754
tags:
- Amateur Radio
title: Introduction to RF Power Amplifiers
---
For field day I've been toying with the idea of buying a power amplifier for my HackRF. What I've come to realize is that there are a lot more to power amplifiers than just how much it amplifies by. This post outlines my current understanding (I'm by no means an expert) on the subject of RF power amplifiers.
@ -61,5 +63,3 @@ Considerations:
- Need a gain of 30dB
- Lower noise figure is always better but a link budget analysis would get you a specific number.
- Want VSWR as close to 1 as possible.

View file

@ -1,10 +1,12 @@
---
title: "Lean Theorem Prover Tactics"
date: 2021-10-10T23:52:41-04:00
date: 2021-10-11 03:52:41
draft: false
tags: ["Formal Methods"]
math: false
medium_enabled: true
medium_post_id: adea1a69ddc8
tags:
- Formal Methods
title: Lean Theorem Prover Tactics
---
I've recently been playing with the Lean Theorem Prover. I am impressed with how some of the mathematics community decided to extend this project via [mathlib](https://leanprover-community.github.io/) and really make proving theorems in this framework easy and enjoyable.

View file

@ -1,9 +1,10 @@
---
title: "Netboot.xyz Bootloader"
date: 2021-06-18T15:43:29-04:00
date: 2021-06-18 19:43:29
draft: false
tags: []
medium_enabled: true
medium_post_id: d99cafd95a34
tags: []
title: Netboot.xyz Bootloader
---
Instead of manually loading ISOs onto a USB stick for [Ventoy](/blog/ventoy) to display, we can use Netboot.xyz to present us a list of options and download them during boot. This requires an internet connection in order to work.
@ -15,4 +16,3 @@ Download the [Netboot ISO](https://boot.netboot.xyz/ipxe/netboot.xyz.iso) and [l
![](/files/images/blog/netboot.xyz.gif)
Another benefit of this approach over Ventoy is that we don't have to manually update the flash drive. It always comes fresh with the ISOs available on their website.

View file

@ -1,10 +1,12 @@
---
title: "Common Network Debugging Commands"
date: 2022-01-02T15:17:02-05:00
date: 2022-01-02 20:17:02
draft: false
tags: ["Networking"]
math: false
medium_enabled: true
medium_post_id: 7a55c1f5f40e
tags:
- Networking
title: Common Network Debugging Commands
---
Below are list of commands that I use to debug common issues in a network. There is a wonderful tool called Wireshark which you can use to sniff packets in a network and filter by a wide range of options, but we'll mainly focus on simple tools that you can use in the terminal.
@ -158,4 +160,3 @@ Address HWtype HWaddress Flags Mask Iface
192.168.0.11 ether 72:25:22:2c:72:72 C wlan0
192.168.0.111 ether 03:33:34:3b:23:39 C wlan0
```

View file

@ -1,11 +1,13 @@
---
title: "Parallel SCP with LFTP"
date: 2021-07-25T10:38:43-04:00
date: 2021-07-25 14:38:43
draft: false
tags: []
math: false
medium_enabled: true
medium_post_id: 610d337c8783
tags: []
title: Parallel SCP with LFTP
---
Segmented file transfer allows you to split up a file into multiple chunks and download them in parallel. There is a program written for Linux called LFTP which can accomplish this task and supports FTP, HTTP, SFTP, BitTorrent, among others. The syntax is a little funky, so I wrote a wrapper I call `pget` which allows for segmented file transfers using SCP.
Usage:
@ -59,4 +61,3 @@ fi
LFTP_COMMAND="pget -n $NUM_SEGMENTS $FILE_LOCATION;bye"
lftp -e "$LFTP_COMMAND" sftp://"$REMOTE_HOST"
```

View file

@ -1,9 +1,11 @@
---
title: "Print Statements with Frame Information"
date: 2021-06-03T13:54:39-04:00
date: 2021-06-03 17:54:39
draft: false
tags: ["Testing"]
medium_enabled: true
medium_post_id: a811c52bda55
tags:
- Testing
title: Print Statements with Frame Information
---
I find it extremely useful to include frame information such as filename, line number, and current function in my print statements. Here's a couple ways that I've done that in the past.
@ -37,4 +39,3 @@ def debuglog(m):
function_name = last_frame_info.function if last_frame_info is not None else "<module>"
print(f"[{filename}:{lineno} {function_name}] {m}")
```

View file

@ -1,9 +1,11 @@
---
title: "Forward Packets with Socat"
date: 2021-06-18T19:38:43-04:00
date: 2021-06-18 23:38:43
draft: false
tags: ["Networking"]
medium_enabled: true
medium_post_id: 790558856bee
tags:
- Networking
title: Forward Packets with Socat
---
I've written about relaying TCP traffic using [SSH port forwarding](/blog/sshlocalportforwarding/). Though sometimes you don't require the authenticity and encryption of SSH or want to use another protocol such as UDP. That's where `socat` comes in.

View file

@ -1,9 +1,10 @@
---
title: "Terminal Output in Vim"
date: 2021-06-18T16:22:30-04:00
date: 2021-06-18 20:22:30
draft: false
tags: []
medium_enabled: true
medium_post_id: fba948955d22
tags: []
title: Terminal Output in Vim
---
In Vim you can output the result of a command below your cursor by using `:r!`.
@ -23,4 +24,3 @@ The current timestamp
```
Outputs: `[2021-06-18 16:13:19]`

View file

@ -1,9 +1,11 @@
---
title: "Ventoy for managing ISOs on one USB"
date: 2021-06-18T15:32:38-04:00
date: 2021-06-18 19:32:38
draft: false
tags: ["Virtualization"]
medium_enabled: true
medium_post_id: b096fed9be3c
tags:
- Virtualization
title: Ventoy for managing ISOs on one USB
---
Traditionally I would hold one Linux distribution per USB drive. Though with 32 GB USB Flash drives only costing $12, why hold only one per drive? That's where Ventoy comes in. With Ventoy, we can store multiple ISOs which it then presents as a boot screen.
@ -21,4 +23,3 @@ To install Ventoy onto a flash drive, follow the [Get Started](https://www.vento
![](/files/images/blog/ventoy.png)
Example screenshot from their website.

View file

@ -1,10 +1,11 @@
---
title: "Z3 Constraint solving"
date: 2021-06-18T00:53:20-04:00
date: 2021-06-18 04:53:20
draft: false
math: true
tags: []
medium_enabled: true
medium_post_id: 9e4ced42d47
tags: []
title: Z3 Constraint solving
---
I've been looking for an easy to use constraint solver for a while and recently I've landed on using the python bindings for the SMT solver Z3.
@ -44,4 +45,3 @@ m = s.model()
x_val = m.eval(x)
y_val = m.eval(y)
```