From a22bb998cbf972fadb7c25e50521bd6b5d9e8da1 Mon Sep 17 00:00:00 2001 From: Brandon Rozek Date: Sat, 18 Feb 2023 21:37:22 -0500 Subject: [PATCH] Added medium syndication metadata --- content/blog/antenna-basics.md | 12 +++++++----- content/blog/comparatorlogicgate.md | 9 +++++---- content/blog/convert-djvu-to-pdf.md | 10 +++++----- content/blog/do-while-other-lang.md | 11 +++++------ content/blog/introrfpoweramp.md | 12 ++++++------ content/blog/leantactics.md | 10 ++++++---- content/blog/netbootxyz.md | 10 +++++----- content/blog/networkdebugging.md | 11 ++++++----- content/blog/parallel-scp.md | 11 ++++++----- content/blog/printdebug.md | 11 ++++++----- content/blog/socatforward.md | 8 +++++--- content/blog/terminaloutputvim.md | 10 +++++----- content/blog/ventoy.md | 11 ++++++----- content/blog/z3constraintsolving.md | 10 +++++----- 14 files changed, 78 insertions(+), 68 deletions(-) diff --git a/content/blog/antenna-basics.md b/content/blog/antenna-basics.md index 8ab6258..068c505 100644 --- a/content/blog/antenna-basics.md +++ b/content/blog/antenna-basics.md @@ -1,11 +1,14 @@ --- -title: "Antenna Basics" -date: 2021-07-25T10:43:11-04:00 +date: 2021-07-25 14:43:11 draft: false -tags: ["Amateur Radio"] math: false medium_enabled: true +medium_post_id: fdec15d43776 +tags: +- Amateur Radio +title: Antenna Basics --- + When a radio wave hits an antenna, the electrical component of the wave induces a difference of potential in the conductor which gives rise to an electric current. This is called electromotive force. The current induced is normally small, therefore, we usually design antennas to be as efficient as possible. Ways to increase efficiency: @@ -14,5 +17,4 @@ Ways to increase efficiency: - If there is a power line nearby, run the antenna at a right angle to that wire to decrease interference. - Make the antenna resonant at the frequency you're interested in. You can do this by adjusting the length of the wire, inductance, capacitance. - Design the antenna so that it focuses the energy from the direction you care about, as opposed to listening equally in all directions. -- Similarly, raise the antenna higher off the ground so that more of it's beam pattern reaches the horizon. - +- Similarly, raise the antenna higher off the ground so that more of it's beam pattern reaches the horizon. \ No newline at end of file diff --git a/content/blog/comparatorlogicgate.md b/content/blog/comparatorlogicgate.md index 8e6c8a8..4417b4f 100644 --- a/content/blog/comparatorlogicgate.md +++ b/content/blog/comparatorlogicgate.md @@ -1,10 +1,11 @@ --- -title: "Comparator Logic Gate" -date: 2021-06-18T01:09:45-04:00 +date: 2021-06-18 05:09:45 draft: false -tags: [] math: true medium_enabled: true +medium_post_id: 7bbc125ead40 +tags: [] +title: Comparator Logic Gate --- This post is heavily derived from the Wikipedia post on [Digital Comparators](https://en.wikipedia.org/wiki/Digital_comparator) and therefore can be distributed under the Creative Commons Attribution-ShareAlike 3.0 license. @@ -52,4 +53,4 @@ The only way for this to evaluate to true is if A is 1 and B is 0. That is $(A > To compare an entire bitstring, we start from the most significant bit and check to see if one bit is greater than the other. If not, it will then check the next bit while confirming that all the previous bits were the same. For a 3-bit comparator, the logic will look like the following: $$ (A_3A_2A_1 > B_3 B_2 B_1) \equiv A_3\bar{B_3} + \overline{(A_3 \oplus B_3)}A_2\bar{B_2} + \overline{(A_3 \oplus B_3)}\overline{(A_2 \oplus B_2)}A_1\bar{B_1} -$$ +$$ \ No newline at end of file diff --git a/content/blog/convert-djvu-to-pdf.md b/content/blog/convert-djvu-to-pdf.md index 552d673..fd5e287 100644 --- a/content/blog/convert-djvu-to-pdf.md +++ b/content/blog/convert-djvu-to-pdf.md @@ -1,10 +1,11 @@ --- -title: "Convert DJVU to PDF" -date: 2021-08-27T22:00:00-04:00 +date: 2021-08-28 02:00:00 draft: false -tags: [] math: false medium_enabled: true +medium_post_id: ddf23ae64f9a +tags: [] +title: Convert DJVU to PDF --- I've recently come across the DJVU file format before and needed to convert it to a PDF. The most reliable way I've found to do it is via the following command. @@ -42,5 +43,4 @@ if ! command -v ps2pdf > /dev/null ; then fi djvups "$1" | ps2pdf - "${1%.*}.pdf" -``` - +``` \ No newline at end of file diff --git a/content/blog/do-while-other-lang.md b/content/blog/do-while-other-lang.md index 36de4d0..cc250c2 100644 --- a/content/blog/do-while-other-lang.md +++ b/content/blog/do-while-other-lang.md @@ -1,10 +1,11 @@ --- -title: "Do-While Loop in Other Languages" -date: 2021-08-27T21:50:02-04:00 +date: 2021-08-28 01:50:02 draft: false -tags: [] math: false medium_enabled: true +medium_post_id: 5a9c792673f2 +tags: [] +title: Do-While Loop in Other Languages --- Some languages like C, C++, and Java have a concept of a Do-While loop which normally look like the following: @@ -22,6 +23,4 @@ first_run = True while condition or first_run: first_run = False statements -``` - - +``` \ No newline at end of file diff --git a/content/blog/introrfpoweramp.md b/content/blog/introrfpoweramp.md index 2411c39..0b77d2d 100644 --- a/content/blog/introrfpoweramp.md +++ b/content/blog/introrfpoweramp.md @@ -1,10 +1,12 @@ --- -title: "Introduction to RF Power Amplifiers" -date: 2021-04-10T13:01:00-04:00 +date: 2021-04-10 17:01:00 draft: false -tags: ["Amateur Radio"] math: true medium_enabled: true +medium_post_id: a8510ebe7754 +tags: +- Amateur Radio +title: Introduction to RF Power Amplifiers --- For field day I've been toying with the idea of buying a power amplifier for my HackRF. What I've come to realize is that there are a lot more to power amplifiers than just how much it amplifies by. This post outlines my current understanding (I'm by no means an expert) on the subject of RF power amplifiers. @@ -60,6 +62,4 @@ Considerations: - Need a gain of 30dB - Lower noise figure is always better but a link budget analysis would get you a specific number. -- Want VSWR as close to 1 as possible. - - +- Want VSWR as close to 1 as possible. \ No newline at end of file diff --git a/content/blog/leantactics.md b/content/blog/leantactics.md index 348b44a..046e7c4 100644 --- a/content/blog/leantactics.md +++ b/content/blog/leantactics.md @@ -1,10 +1,12 @@ --- -title: "Lean Theorem Prover Tactics" -date: 2021-10-10T23:52:41-04:00 +date: 2021-10-11 03:52:41 draft: false -tags: ["Formal Methods"] math: false medium_enabled: true +medium_post_id: adea1a69ddc8 +tags: +- Formal Methods +title: Lean Theorem Prover Tactics --- I've recently been playing with the Lean Theorem Prover. I am impressed with how some of the mathematics community decided to extend this project via [mathlib](https://leanprover-community.github.io/) and really make proving theorems in this framework easy and enjoyable. @@ -284,4 +286,4 @@ end Documentation: https://leanprover-community.github.io/mathlib_docs/tactics.html#linarith ## Conclusion -A common pattern of writing proofs for me is to use a combination of `hint` and `have` with `library_search`. Especially when you are not an expert in a theorem prover, it's nice to have the system fill in some of the simpler steps. I generally prefer tactics that give you a list of simpler tactics back as opposed to solving the goal in the background without any proof. Regardless, I'm glad that many of these decision procedures exist to help me deal with what can sometimes be the verbosity of theorem proving. +A common pattern of writing proofs for me is to use a combination of `hint` and `have` with `library_search`. Especially when you are not an expert in a theorem prover, it's nice to have the system fill in some of the simpler steps. I generally prefer tactics that give you a list of simpler tactics back as opposed to solving the goal in the background without any proof. Regardless, I'm glad that many of these decision procedures exist to help me deal with what can sometimes be the verbosity of theorem proving. \ No newline at end of file diff --git a/content/blog/netbootxyz.md b/content/blog/netbootxyz.md index 16283a7..19aa371 100644 --- a/content/blog/netbootxyz.md +++ b/content/blog/netbootxyz.md @@ -1,9 +1,10 @@ --- -title: "Netboot.xyz Bootloader" -date: 2021-06-18T15:43:29-04:00 +date: 2021-06-18 19:43:29 draft: false -tags: [] medium_enabled: true +medium_post_id: d99cafd95a34 +tags: [] +title: Netboot.xyz Bootloader --- Instead of manually loading ISOs onto a USB stick for [Ventoy](/blog/ventoy) to display, we can use Netboot.xyz to present us a list of options and download them during boot. This requires an internet connection in order to work. @@ -14,5 +15,4 @@ Download the [Netboot ISO](https://boot.netboot.xyz/ipxe/netboot.xyz.iso) and [l ![](/files/images/blog/netboot.xyz.gif) -Another benefit of this approach over Ventoy is that we don't have to manually update the flash drive. It always comes fresh with the ISOs available on their website. - +Another benefit of this approach over Ventoy is that we don't have to manually update the flash drive. It always comes fresh with the ISOs available on their website. \ No newline at end of file diff --git a/content/blog/networkdebugging.md b/content/blog/networkdebugging.md index b3dbf2c..c0aa1a8 100644 --- a/content/blog/networkdebugging.md +++ b/content/blog/networkdebugging.md @@ -1,10 +1,12 @@ --- -title: "Common Network Debugging Commands" -date: 2022-01-02T15:17:02-05:00 +date: 2022-01-02 20:17:02 draft: false -tags: ["Networking"] math: false medium_enabled: true +medium_post_id: 7a55c1f5f40e +tags: +- Networking +title: Common Network Debugging Commands --- Below are list of commands that I use to debug common issues in a network. There is a wonderful tool called Wireshark which you can use to sniff packets in a network and filter by a wide range of options, but we'll mainly focus on simple tools that you can use in the terminal. @@ -157,5 +159,4 @@ Address HWtype HWaddress Flags Mask Iface 192.168.0.1 ether 10:1d:b1:1d:1f:91 C wlan0 192.168.0.11 ether 72:25:22:2c:72:72 C wlan0 192.168.0.111 ether 03:33:34:3b:23:39 C wlan0 -``` - +``` \ No newline at end of file diff --git a/content/blog/parallel-scp.md b/content/blog/parallel-scp.md index 37466a2..031b52d 100644 --- a/content/blog/parallel-scp.md +++ b/content/blog/parallel-scp.md @@ -1,11 +1,13 @@ --- -title: "Parallel SCP with LFTP" -date: 2021-07-25T10:38:43-04:00 +date: 2021-07-25 14:38:43 draft: false -tags: [] math: false medium_enabled: true +medium_post_id: 610d337c8783 +tags: [] +title: Parallel SCP with LFTP --- + Segmented file transfer allows you to split up a file into multiple chunks and download them in parallel. There is a program written for Linux called LFTP which can accomplish this task and supports FTP, HTTP, SFTP, BitTorrent, among others. The syntax is a little funky, so I wrote a wrapper I call `pget` which allows for segmented file transfers using SCP. Usage: @@ -58,5 +60,4 @@ fi LFTP_COMMAND="pget -n $NUM_SEGMENTS $FILE_LOCATION;bye" lftp -e "$LFTP_COMMAND" sftp://"$REMOTE_HOST" -``` - +``` \ No newline at end of file diff --git a/content/blog/printdebug.md b/content/blog/printdebug.md index 7d9e776..795d377 100644 --- a/content/blog/printdebug.md +++ b/content/blog/printdebug.md @@ -1,9 +1,11 @@ --- -title: "Print Statements with Frame Information" -date: 2021-06-03T13:54:39-04:00 +date: 2021-06-03 17:54:39 draft: false -tags: ["Testing"] medium_enabled: true +medium_post_id: a811c52bda55 +tags: +- Testing +title: Print Statements with Frame Information --- I find it extremely useful to include frame information such as filename, line number, and current function in my print statements. Here's a couple ways that I've done that in the past. @@ -36,5 +38,4 @@ def debuglog(m): lineno = last_frame_info.lineno if last_frame_info is not None else 1 function_name = last_frame_info.function if last_frame_info is not None else "" print(f"[{filename}:{lineno} {function_name}] {m}") -``` - +``` \ No newline at end of file diff --git a/content/blog/socatforward.md b/content/blog/socatforward.md index a790e15..c37f63a 100644 --- a/content/blog/socatforward.md +++ b/content/blog/socatforward.md @@ -1,9 +1,11 @@ --- -title: "Forward Packets with Socat" -date: 2021-06-18T19:38:43-04:00 +date: 2021-06-18 23:38:43 draft: false -tags: ["Networking"] medium_enabled: true +medium_post_id: 790558856bee +tags: +- Networking +title: Forward Packets with Socat --- I've written about relaying TCP traffic using [SSH port forwarding](/blog/sshlocalportforwarding/). Though sometimes you don't require the authenticity and encryption of SSH or want to use another protocol such as UDP. That's where `socat` comes in. diff --git a/content/blog/terminaloutputvim.md b/content/blog/terminaloutputvim.md index 36cdf71..8382cb3 100644 --- a/content/blog/terminaloutputvim.md +++ b/content/blog/terminaloutputvim.md @@ -1,9 +1,10 @@ --- -title: "Terminal Output in Vim" -date: 2021-06-18T16:22:30-04:00 +date: 2021-06-18 20:22:30 draft: false -tags: [] medium_enabled: true +medium_post_id: fba948955d22 +tags: [] +title: Terminal Output in Vim --- In Vim you can output the result of a command below your cursor by using `:r!`. @@ -22,5 +23,4 @@ The current timestamp :r! echo "[$(date '+\%Y-\%m-\%d \%H:\%M:\%S')]" ``` -Outputs: `[2021-06-18 16:13:19]` - +Outputs: `[2021-06-18 16:13:19]` \ No newline at end of file diff --git a/content/blog/ventoy.md b/content/blog/ventoy.md index 6a5fdbe..75f8536 100644 --- a/content/blog/ventoy.md +++ b/content/blog/ventoy.md @@ -1,9 +1,11 @@ --- -title: "Ventoy for managing ISOs on one USB" -date: 2021-06-18T15:32:38-04:00 +date: 2021-06-18 19:32:38 draft: false -tags: ["Virtualization"] medium_enabled: true +medium_post_id: b096fed9be3c +tags: +- Virtualization +title: Ventoy for managing ISOs on one USB --- Traditionally I would hold one Linux distribution per USB drive. Though with 32 GB USB Flash drives only costing $12, why hold only one per drive? That's where Ventoy comes in. With Ventoy, we can store multiple ISOs which it then presents as a boot screen. @@ -20,5 +22,4 @@ To install Ventoy onto a flash drive, follow the [Get Started](https://www.vento ![](/files/images/blog/ventoy.png) -Example screenshot from their website. - +Example screenshot from their website. \ No newline at end of file diff --git a/content/blog/z3constraintsolving.md b/content/blog/z3constraintsolving.md index be5181c..f2534e9 100644 --- a/content/blog/z3constraintsolving.md +++ b/content/blog/z3constraintsolving.md @@ -1,10 +1,11 @@ --- -title: "Z3 Constraint solving" -date: 2021-06-18T00:53:20-04:00 +date: 2021-06-18 04:53:20 draft: false math: true -tags: [] medium_enabled: true +medium_post_id: 9e4ced42d47 +tags: [] +title: Z3 Constraint solving --- I've been looking for an easy to use constraint solver for a while and recently I've landed on using the python bindings for the SMT solver Z3. @@ -43,5 +44,4 @@ s.check() m = s.model() x_val = m.eval(x) y_val = m.eval(y) -``` - +``` \ No newline at end of file