47 lines
1.3 KiB
Markdown
47 lines
1.3 KiB
Markdown
pyhackrf-ctypes
|
|
==============
|
|
pyhackrf-ctypes is a Python wrapper for libhackrf.<br>
|
|
I create this project because I want a simple Python interface to my hackrf board.
|
|
At First I use pyusb to directly get the data from HackRF, then I found pyusb can only move data at a rate of 5MiB/S, too slow for HackRF.So I choose to use ctypes .
|
|
|
|
# Dependencies
|
|
|
|
* libusb,NumPy
|
|
* Python 2.7.x/3.3+
|
|
* [libhackrf](https://github.com/mossmann/hackrf/tree/master/host)
|
|
|
|
sudo apt-get install python-dev,libusb-1.0-0
|
|
|
|
|
|
|
|
## Examples
|
|
|
|
```python
|
|
import pylibhackrf ,ctypes
|
|
|
|
hackrf = pylibhackrf.HackRf()
|
|
|
|
if hackrf.is_open == False:
|
|
hackrf.setup()
|
|
hackrf.set_freq(100 * 1000 * 1000)
|
|
hackrf.set_sample_rate(8 * 1000 * 1000)
|
|
hackrf.set_amp_enable(False)
|
|
hackrf.set_lna_gain(16)
|
|
hackrf.set_vga_gain(20)
|
|
hackrf.set_baseband_filter_bandwidth(1 * 1000 * 1000)
|
|
|
|
def callback_fun(hackrf_transfer):
|
|
array_type = (ctypes.c_byte*length)
|
|
values = ctypes.cast(hackrf_transfer.contents.buffer, ctypes.POINTER(array_type)).contents
|
|
#iq data here
|
|
iq = hackrf.packed_bytes_to_iq(values)
|
|
return 0
|
|
|
|
hackrf.start_rx_mode(callback_fun)
|
|
```
|
|
|
|
# Todo
|
|
There are a few remaining functions in libhackrf haven't been wrapped.
|
|
|
|
# License
|
|
Do What The Fuck You Want To Public License.
|