hugo/hugolib/config.go
Bjørn Erik Pedersen 4d26ab33dc
Make .Content (almost) always available in shortcodes
This resolves some surprising behaviour when reading other pages' content from shortcodes. Before this commit, that behaviour was undefined. Note that this has never been an issue from regular templates.

It will still not be possible to get **the current shortcode's  page's rendered content**. That would have impressed Einstein.

The new and well defined rules are:

* `.Page.Content` from a shortcode will be empty. The related `.Page.Truncated` `.Page.Summary`, `.Page.WordCount`, `.Page.ReadingTime`, `.Page.Plain` and `.Page.PlainWords` will also have empty values.
* For _other pages_ (retrieved via `.Page.Site.GetPage`, `.Site.Pages` etc.) the `.Content` is there to use as you please as long as you don't have infinite content recursion in your shortcode/content setup. See below.
* `.Page.TableOfContents` is good to go (but does not support shortcodes in headlines; this is unchanged)

If you get into a situation of infinite recursion, the `.Content` will be empty. Run `hugo -v` for more information.

Fixes #4632
Fixes #4653
Fixes #4655
2018-04-21 22:02:56 +02:00

454 lines
12 KiB
Go

// Copyright 2016-present The Hugo Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package hugolib
import (
"errors"
"fmt"
"path/filepath"
"io"
"strings"
"github.com/gohugoio/hugo/config"
"github.com/gohugoio/hugo/helpers"
"github.com/spf13/afero"
"github.com/spf13/viper"
)
// ConfigSourceDescriptor describes where to find the config (e.g. config.toml etc.).
type ConfigSourceDescriptor struct {
Fs afero.Fs
// Full path to the config file to use, i.e. /my/project/config.toml
Filename string
// The path to the directory to look for configuration. Is used if Filename is not
// set.
Path string
// The project's working dir. Is used to look for additional theme config.
WorkingDir string
}
func (d ConfigSourceDescriptor) configFilenames() []string {
return strings.Split(d.Filename, ",")
}
// LoadConfigDefault is a convenience method to load the default "config.toml" config.
func LoadConfigDefault(fs afero.Fs) (*viper.Viper, error) {
v, _, err := LoadConfig(ConfigSourceDescriptor{Fs: fs, Filename: "config.toml"})
return v, err
}
// LoadConfig loads Hugo configuration into a new Viper and then adds
// a set of defaults.
func LoadConfig(d ConfigSourceDescriptor, doWithConfig ...func(cfg config.Provider) error) (*viper.Viper, []string, error) {
var configFiles []string
fs := d.Fs
v := viper.New()
v.SetFs(fs)
if d.Path == "" {
d.Path = "."
}
configFilenames := d.configFilenames()
v.AutomaticEnv()
v.SetEnvPrefix("hugo")
v.SetConfigFile(configFilenames[0])
v.AddConfigPath(d.Path)
err := v.ReadInConfig()
if err != nil {
if _, ok := err.(viper.ConfigParseError); ok {
return nil, configFiles, err
}
return nil, configFiles, fmt.Errorf("Unable to locate Config file. Perhaps you need to create a new site.\n Run `hugo help new` for details. (%s)\n", err)
}
if cf := v.ConfigFileUsed(); cf != "" {
configFiles = append(configFiles, cf)
}
for _, configFile := range configFilenames[1:] {
var r io.Reader
var err error
if r, err = fs.Open(configFile); err != nil {
return nil, configFiles, fmt.Errorf("Unable to open Config file.\n (%s)\n", err)
}
if err = v.MergeConfig(r); err != nil {
return nil, configFiles, fmt.Errorf("Unable to parse/merge Config file (%s).\n (%s)\n", configFile, err)
}
configFiles = append(configFiles, configFile)
}
if err := loadDefaultSettingsFor(v); err != nil {
return v, configFiles, err
}
themeConfigFile, err := loadThemeConfig(d, v)
if err != nil {
return v, configFiles, err
}
if themeConfigFile != "" {
configFiles = append(configFiles, themeConfigFile)
}
// We create languages based on the settings, so we need to make sure that
// all configuration is loaded/set before doing that.
for _, d := range doWithConfig {
if err := d(v); err != nil {
return v, configFiles, err
}
}
if err := loadLanguageSettings(v, nil); err != nil {
return v, configFiles, err
}
return v, configFiles, nil
}
func loadLanguageSettings(cfg config.Provider, oldLangs helpers.Languages) error {
defaultLang := cfg.GetString("defaultContentLanguage")
var languages map[string]interface{}
languagesFromConfig := cfg.GetStringMap("languages")
disableLanguages := cfg.GetStringSlice("disableLanguages")
if len(disableLanguages) == 0 {
languages = languagesFromConfig
} else {
languages = make(map[string]interface{})
for k, v := range languagesFromConfig {
for _, disabled := range disableLanguages {
if disabled == defaultLang {
return fmt.Errorf("cannot disable default language %q", defaultLang)
}
if strings.EqualFold(k, disabled) {
v.(map[string]interface{})["disabled"] = true
break
}
}
languages[k] = v
}
}
var (
langs helpers.Languages
err error
)
if len(languages) == 0 {
langs = append(langs, helpers.NewDefaultLanguage(cfg))
} else {
langs, err = toSortedLanguages(cfg, languages)
if err != nil {
return fmt.Errorf("Failed to parse multilingual config: %s", err)
}
}
if oldLangs != nil {
// When in multihost mode, the languages are mapped to a server, so
// some structural language changes will need a restart of the dev server.
// The validation below isn't complete, but should cover the most
// important cases.
var invalid bool
if langs.IsMultihost() != oldLangs.IsMultihost() {
invalid = true
} else {
if langs.IsMultihost() && len(langs) != len(oldLangs) {
invalid = true
}
}
if invalid {
return errors.New("language change needing a server restart detected")
}
if langs.IsMultihost() {
// We need to transfer any server baseURL to the new language
for i, ol := range oldLangs {
nl := langs[i]
nl.Set("baseURL", ol.GetString("baseURL"))
}
}
}
// The defaultContentLanguage is something the user has to decide, but it needs
// to match a language in the language definition list.
langExists := false
for _, lang := range langs {
if lang.Lang == defaultLang {
langExists = true
break
}
}
if !langExists {
return fmt.Errorf("site config value %q for defaultContentLanguage does not match any language definition", defaultLang)
}
cfg.Set("languagesSorted", langs)
cfg.Set("multilingual", len(langs) > 1)
multihost := langs.IsMultihost()
if multihost {
cfg.Set("defaultContentLanguageInSubdir", true)
cfg.Set("multihost", true)
}
if multihost {
// The baseURL may be provided at the language level. If that is true,
// then every language must have a baseURL. In this case we always render
// to a language sub folder, which is then stripped from all the Permalink URLs etc.
for _, l := range langs {
burl := l.GetLocal("baseURL")
if burl == nil {
return errors.New("baseURL must be set on all or none of the languages")
}
}
}
return nil
}
func loadThemeConfig(d ConfigSourceDescriptor, v1 *viper.Viper) (string, error) {
theme := v1.GetString("theme")
if theme == "" {
return "", nil
}
themesDir := helpers.AbsPathify(d.WorkingDir, v1.GetString("themesDir"))
configDir := filepath.Join(themesDir, theme)
var (
configPath string
exists bool
err error
)
// Viper supports more, but this is the sub-set supported by Hugo.
for _, configFormats := range []string{"toml", "yaml", "yml", "json"} {
configPath = filepath.Join(configDir, "config."+configFormats)
exists, err = helpers.Exists(configPath, d.Fs)
if err != nil {
return "", err
}
if exists {
break
}
}
if !exists {
// No theme config set.
return "", nil
}
v2 := viper.New()
v2.SetFs(d.Fs)
v2.AutomaticEnv()
v2.SetEnvPrefix("hugo")
v2.SetConfigFile(configPath)
err = v2.ReadInConfig()
if err != nil {
return "", err
}
const (
paramsKey = "params"
languagesKey = "languages"
menuKey = "menu"
)
for _, key := range []string{paramsKey, "outputformats", "mediatypes"} {
mergeStringMapKeepLeft("", key, v1, v2)
}
themeLower := strings.ToLower(theme)
themeParamsNamespace := paramsKey + "." + themeLower
// Set namespaced params
if v2.IsSet(paramsKey) && !v1.IsSet(themeParamsNamespace) {
// Set it in the default store to make sure it gets in the same or
// behind the others.
v1.SetDefault(themeParamsNamespace, v2.Get(paramsKey))
}
// Only add params and new menu entries, we do not add language definitions.
if v1.IsSet(languagesKey) && v2.IsSet(languagesKey) {
v1Langs := v1.GetStringMap(languagesKey)
for k, _ := range v1Langs {
langParamsKey := languagesKey + "." + k + "." + paramsKey
mergeStringMapKeepLeft(paramsKey, langParamsKey, v1, v2)
}
v2Langs := v2.GetStringMap(languagesKey)
for k, _ := range v2Langs {
if k == "" {
continue
}
langParamsKey := languagesKey + "." + k + "." + paramsKey
langParamsThemeNamespace := langParamsKey + "." + themeLower
// Set namespaced params
if v2.IsSet(langParamsKey) && !v1.IsSet(langParamsThemeNamespace) {
v1.SetDefault(langParamsThemeNamespace, v2.Get(langParamsKey))
}
langMenuKey := languagesKey + "." + k + "." + menuKey
if v2.IsSet(langMenuKey) {
// Only add if not in the main config.
v2menus := v2.GetStringMap(langMenuKey)
for k, v := range v2menus {
menuEntry := menuKey + "." + k
menuLangEntry := langMenuKey + "." + k
if !v1.IsSet(menuEntry) && !v1.IsSet(menuLangEntry) {
v1.Set(menuLangEntry, v)
}
}
}
}
}
// Add menu definitions from theme not found in project
if v2.IsSet("menu") {
v2menus := v2.GetStringMap(menuKey)
for k, v := range v2menus {
menuEntry := menuKey + "." + k
if !v1.IsSet(menuEntry) {
v1.SetDefault(menuEntry, v)
}
}
}
return v2.ConfigFileUsed(), nil
}
func mergeStringMapKeepLeft(rootKey, key string, v1, v2 *viper.Viper) {
if !v2.IsSet(key) {
return
}
if !v1.IsSet(key) && !(rootKey != "" && rootKey != key && v1.IsSet(rootKey)) {
v1.Set(key, v2.Get(key))
return
}
m1 := v1.GetStringMap(key)
m2 := v2.GetStringMap(key)
for k, v := range m2 {
if _, found := m1[k]; !found {
if rootKey != "" && v1.IsSet(rootKey+"."+k) {
continue
}
m1[k] = v
}
}
}
func loadDefaultSettingsFor(v *viper.Viper) error {
c, err := helpers.NewContentSpec(v)
if err != nil {
return err
}
v.RegisterAlias("indexes", "taxonomies")
v.SetDefault("cleanDestinationDir", false)
v.SetDefault("watch", false)
v.SetDefault("metaDataFormat", "toml")
v.SetDefault("contentDir", "content")
v.SetDefault("layoutDir", "layouts")
v.SetDefault("staticDir", "static")
v.SetDefault("resourceDir", "resources")
v.SetDefault("archetypeDir", "archetypes")
v.SetDefault("publishDir", "public")
v.SetDefault("dataDir", "data")
v.SetDefault("i18nDir", "i18n")
v.SetDefault("themesDir", "themes")
v.SetDefault("buildDrafts", false)
v.SetDefault("buildFuture", false)
v.SetDefault("buildExpired", false)
v.SetDefault("uglyURLs", false)
v.SetDefault("verbose", false)
v.SetDefault("ignoreCache", false)
v.SetDefault("canonifyURLs", false)
v.SetDefault("relativeURLs", false)
v.SetDefault("removePathAccents", false)
v.SetDefault("titleCaseStyle", "AP")
v.SetDefault("taxonomies", map[string]string{"tag": "tags", "category": "categories"})
v.SetDefault("permalinks", make(PermalinkOverrides, 0))
v.SetDefault("sitemap", Sitemap{Priority: -1, Filename: "sitemap.xml"})
v.SetDefault("pygmentsStyle", "monokai")
v.SetDefault("pygmentsUseClasses", false)
v.SetDefault("pygmentsCodeFences", false)
v.SetDefault("pygmentsUseClassic", false)
v.SetDefault("pygmentsOptions", "")
v.SetDefault("disableLiveReload", false)
v.SetDefault("pluralizeListTitles", true)
v.SetDefault("preserveTaxonomyNames", false)
v.SetDefault("forceSyncStatic", false)
v.SetDefault("footnoteAnchorPrefix", "")
v.SetDefault("footnoteReturnLinkContents", "")
v.SetDefault("newContentEditor", "")
v.SetDefault("paginate", 10)
v.SetDefault("paginatePath", "page")
v.SetDefault("summaryLength", 70)
v.SetDefault("blackfriday", c.BlackFriday)
v.SetDefault("rSSUri", "index.xml")
v.SetDefault("rssLimit", -1)
v.SetDefault("sectionPagesMenu", "")
v.SetDefault("disablePathToLower", false)
v.SetDefault("hasCJKLanguage", false)
v.SetDefault("enableEmoji", false)
v.SetDefault("pygmentsCodeFencesGuessSyntax", false)
v.SetDefault("useModTimeAsFallback", false)
v.SetDefault("defaultContentLanguage", "en")
v.SetDefault("defaultContentLanguageInSubdir", false)
v.SetDefault("enableMissingTranslationPlaceholders", false)
v.SetDefault("enableGitInfo", false)
v.SetDefault("ignoreFiles", make([]string, 0))
v.SetDefault("disableAliases", false)
v.SetDefault("debug", false)
v.SetDefault("disableFastRender", false)
v.SetDefault("timeout", 10000) // 10 seconds
// Remove in Hugo 0.39
if v.GetBool("useModTimeAsFallback") {
helpers.Deprecated("Site config", "useModTimeAsFallback", `Replace with this in your config.toml:
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
`, false)
}
return nil
}