This makes it consistent with how it behaves when it's set in config.toml.
This commit also unifies BaseURL in Site.Info so we now have one source for this value.
Fixes#3262
Before this commit, Hugo used `html/template` for all Go templates.
While this is a fine choice for HTML and maybe also RSS feeds, it is painful for plain text formats such as CSV, JSON etc.
This commit fixes that by using the `IsPlainText` attribute on the output format to decide what to use.
A couple of notes:
* The above requires a nonambiguous template name to type mapping. I.e. `/layouts/_default/list.json` will only work if there is only one JSON output format, `/layouts/_default/list.mytype.json` will always work.
* Ambiguous types will fall back to HTML.
* Partials inherits the text vs HTML identificator of the container template. This also means that plain text templates can only include plain text partials.
* Shortcode templates are, by definition, currently HTML templates only.
Fixes#3221
Having the content page name in the log key for the distinct error logger isnt't very usable when you have an error in a commonly used partial.
Using the Page Kind reduces the amount of log entries. Here is an example from an error in the partial menu.html, used in all the page templates:
```
Started building sites ...
ERROR 2017/04/02 12:19:43 Error while rendering "page": template: /Users/bep/sites/bepsays.com/layouts/_default/single.html:17:7: executing "/Users/bep/sites/bepsays.com/layouts/_default/single.html" at <partial "menu.html" ...>: error calling partial: template: partials/menu.html:9:11: executing "partials/menu.html" at <.DoesNotExist>: can't evaluate field DoesNotExist in type *hugolib.PageOutput
ERROR 2017/04/02 12:19:43 Error while rendering "section": template: /Users/bep/sites/bepsays.com/layouts/_default/section.html:17:7: executing "/Users/bep/sites/bepsays.com/layouts/_default/section.html" at <partial "menu.html" ...>: error calling partial: template: partials/menu.html:9:11: executing "partials/menu.html" at <.DoesNotExist>: can't evaluate field DoesNotExist in type *hugolib.PageOutput
ERROR 2017/04/02 12:19:43 Error while rendering "taxonomy": template: /Users/bep/sites/bepsays.com/layouts/_default/list.html:17:7: executing "/Users/bep/sites/bepsays.com/layouts/_default/list.html" at <partial "menu.html" ...>: error calling partial: template: partials/menu.html:9:11: executing "partials/menu.html" at <.DoesNotExist>: can't evaluate field DoesNotExist in type *hugolib.PageOutput
ERROR 2017/04/02 12:19:43 Error while rendering "home": template: /Users/bep/sites/bepsays.com/layouts/index.html:17:7: executing "/Users/bep/sites/bepsays.com/layouts/index.html" at <partial "menu.html" ...>: error calling partial: template: partials/menu.html:9:11: executing "partials/menu.html" at <.DoesNotExist>: can't evaluate field DoesNotExist in type *hugolib.PageOutput
ERROR 2017/04/02 12:19:43 Error while rendering "404": template: 404.html:2:3: executing "404.html" at <partial "menu.html" ...>: error calling partial: template: partials/menu.html:9:11: executing "partials/menu.html" at <.DoesNotExist>: can't evaluate field DoesNotExist in type *hugolib.PageOutput
Built site for language nn:
```
Which is pretty good.
Before this commit, Hugo used `html/template` for all Go templates.
While this is a fine choice for HTML and maybe also RSS feeds, it is painful for plain text formats such as CSV, JSON etc.
This commit fixes that by using the `IsPlainText` attribute on the output format to decide what to use.
A couple of notes:
* The above requires a nonambiguous template name to type mapping. I.e. `/layouts/_default/list.json` will only work if there is only one JSON output format, `/layouts/_default/list.mytype.json` will always work.
* Ambiguous types will fall back to HTML.
* Partials inherits the text vs HTML identificator of the container template. This also means that plain text templates can only include plain text partials.
* Shortcode templates are, by definition, currently HTML templates only.
Fixes#3221
Using it for list pages doesn't work and has potential weird side-effects.
The user probably meant to range over .Site.ReqularPages, and that is now marked clearly in the log.
Will have to fix this in a better way later in relation to the non-renderable pages.
But this commit brings the Hugo Benchmark down to "only slightly slower" than master.
```
benchmark old ns/op new ns/op delta
BenchmarkHugo-4 10074504521 10071236251 -0.03%
benchmark old allocs new allocs delta
BenchmarkHugo-4 43623091 49271859 +12.95%
benchmark old bytes new bytes delta
BenchmarkHugo-4 9468322704 9725848376 +2.72%
```
Which is something we can work with.
This is a pretty fundamental change in Hugo, but absolutely needed if we should have any hope of getting "multiple outputs" done.
This commit's goal is to say:
* Every file target path is created by `createTargetPath`, i.e. one function for all.
* That function takes every page and site parameter into account, to avoid fragile string parsing to uglify etc. later on.
* The path creation logic has full test coverage.
* All permalinks, paginator URLs etc. are then built on top of that same logic.
Fixes#1252Fixes#2110Closes#2374Fixes#1885Fixes#3102Fixes#3179Fixes#1641Fixes#1989
Changing it to PageOutput was a mistake. You may think that the increased parallelism should be a good thing.
But not so much with the increased lock contention and more complex concurrency model.
This commit fixes two different, but related issues:
1) Live-reload when a new shortcode was defined in the content file before the shortcode itself was created.
2) Live-reload when a newly defined shortcode changed its "inner content" status.
This commit also improves the shortcode related error messages to include the full path to the content file in question.
Fixes#3156
Lots of cleanups here:
- Refactor InterfaceToConfig and InterfaceToFrontMatter to use io.Writer.
- Simplify InterfaceToFrontMatter by wrapping InterfaceToConfig.
- Export FrontmatterType since we return it in DetectFrontMatter.
- Refactor removeTOMLIdentifier to avoid blindly replacing "+++".
- Update HandleJSONMetaData to return an empty map on nil input.
- Updates vendored goorgeous package and test for org-mode frontmatter.
- Add tests and godoc comments.
Coverage for parser package increased from 45.2% to 85.2%.
Previously this was left empty, but it is very handy to have a list
of term pages for a given taxonomy. This list can now be paginated
like other page lists. It makes it possible to render summary
content from each terms index page for instance. It also makes it
possible to sort the term pages in the same way that other page
lists can be sorted. An RSS feed is now generated for
KindTaxonomyTerm pages as well.
This also fixes a bug in HugoSites.createMissingPages. Previously
it would only check for existing KindTaxonomyTerm pages if the
taxonomy had any terms defined. So for a taxonomy with no terms
but a taxonomy terms page it would generate a second empty terms
page.
This relates to #3123.
The interfaces and types in `target` made sense at some point, but now this package is too restricted to a hardcoded set of media types.
The overall current logic:
* Create a file path based on some `Translator` with some hardcoded logic handling uglyURLs, hardcoded html suffix etc.
* In in some cases (alias), a template is applied to create the alias file.
* Then the content is written to destination.
One could argue that it is the last bullet that is the actual core responsibility.
This commit fixes that by moving the `hugolib`-related logic where it belong, and simplify the code, i.e. remove the abstractions.
This code will most certainly evolve once we start on #3123, but now it is at least possible to understand where to start.
Fixes#3123
Previously it would only check for existing KindTaxonomyTerm pages
if the taxonomy had any terms defined. So for a taxonomy with no terms
but a taxonomy terms page it would generate a second empty terms page.
When using the lazy blogger setting to automatically generate menu
entries from section pages, we now recognize section pages that have
content, and use the weight and linktitle configured in the frontmatter.
This way, we can use the lazy blogger automatic generation, and
influence menu order and translations, directly from the frontmatter.
Updates #2974
This commit makes sure that the `.Site.LastChange` is fetched from the latest page modification date.
Previously, this value was fetched from the last page in the default page sort, which may not be the last by date
if weight is set.
Fixes#2909Closes#2910
This fixes the behavior of .Truncated that was introduced with commit
bef496b97e which was later broken. The
desired behavior is that .Truncated would evaluate to false when there
was nothing after the user defined summary marker.
This also adds a simple unit test to ensure that this feature isn't
broken again. The check for content after the user defined summary
marker is done on the raw content instead of the working copy because
some of the markup renderers add elements after the marker, making it
difficult to determine if there is actually any content.
The behavior (evaluating to false when there is no content, just
summary) is also now documented.
The Param method currently assumes that its argument is a single,
distinct, top-level key to look up in the Params map. This enhances the
Param method; it will now also attempt to see if the key can be
interpreted as a nested chain of keys to look up in Params.
Fixes#2598
Add a new rssLimit site configuration option with default of 15. Prior
to this fix, you could create your own RSS feed to override the default
limit of 15, but we still had a hardcoded limit of 50 items set in
`hugolib.renderRSS()`.
With this option in place, the `range first 15 .Data.Pages` logic is no
longer hardcoded into the embedded RSS template.
Because the size of the slice passed to the template is now limited to
rssLimit instead of 50, this commit is a breaking change for sites
with a custom RSS template that expects more than 15 items.
Fixes#3035
Note that this looks like overkill for just the logger, and that is correct,
but this will make sense once we start with the template handling etc.
Updates #2701
The new logic for creating Page objects from old node types
didn't include itself in the translation logic, so
`IsTranslated` returned falsely false for sites with only two languages.
The `AllTranslations` method also returned too few pages in that case.
This commit fixes that.
Fixes#2812
This commit fixes the base template lookup order to match the behaviour of regular templates.
```
1. <current-path>/<template-name>-baseof.<suffix>, e.g. list-baseof.<suffix>.
2. <current-path>/baseof.<suffix>
3. _default/<template-name>-baseof.<suffix>, e.g. list-baseof.<suffix>.
4. _default/baseof.<suffix>
For each of the steps above, it will first look in the project, then, if theme is set,
in the theme's layouts folder.
```
Fixes#2783
Fix golint warning: hugolib/site.go:922:13: should omit type
*helpers.Language from declaration of var lang; it will be inferred from
the right-hand side
See #2014
There are currently several Params and case related issues floating around in Hugo.
This is very confusing for users and one of the most common support questions on the forum.
And while there have been done some great leg work in Viper etc., this is of limited value since this and similar doesn't work:
`Params.myCamelCasedParam`
Hugo has control over all the template method invocations, and can take care of all the lower-casing of the map lookup keys.
But that doesn't help with direct template lookups of type `Site.Params.TWITTER_CONFIG.USER_ID`.
This commit solves that by doing some carefully crafted modifications of the templates' AST -- lowercasing the params keys.
This is low-level work, but it's not like the template API wil change -- and this is important enough to defend such "bit fiddling".
Tests are added for all the template engines: Go templates, Ace and Amber.
Fixes#2615Fixes#1129Fixes#2590
Some sites, Hugo docs included, have faulty alias definitions that point
to itself or another real page. These will be overwritten in the next step.
This is how it behaves in Hugo 0.17, too.
Updates #2297
This includes removing the error return value from Permalink and RelPermalink.
We ignore that error all over the place, so we might as well remove it.
Updates #2297
To make it easier to follow and understand.
Both building and rebuilding now follow a four step flow:
1. Init
2. Process
3. Assemble
4. Render
And now there are only one Build method, used for both builds and rebuilds.
Updates #2297
There are currently several Params and case related issues floating around in Hugo.
This is very confusing for users and one of the most common support questions on the forum.
And while there have been done some great leg work in Viper etc., this is of limited value since this and similar doesn't work:
`Params.myCamelCasedParam`
Hugo has control over all the template method invocations, and can take care of all the lower-casing of the map lookup keys.
But that doesn't help with direct template lookups of type `Site.Params.TWITTER_CONFIG.USER_ID`.
This commit solves that by doing some carefully crafted modifications of the templates' AST -- lowercasing the params keys.
This is low-level work, but it's not like the template API wil change -- and this is important enough to defend such "bit fiddling".
Tests are added for all the template engines: Go templates, Ace and Amber.
Fixes#2615Fixes#1129Fixes#2590
Add imageConfig function which calls image.DecodeConfig and returns the height, width and color mode of the image. (#2677)
This allows for more advanced image shortcodes and templates such as those required by AMP.
layouts/shortcodes/amp-img.html
```
{{ $src := .Get "src" }}
{{ $config := imageConfig (printf "/static/%s" $src) }}
<amp-img src="{{$src}}"
height="{{$config.Height}}"
width="{{$config.Width}}"
layout="responsive">
</amp-img>
```
This commit adds a `GitInfo` object to `Page` if `EnableGitInfo` is set.
It then also sets `Lastmod` for the given `Page` to the author date provided by Git.
The Git integrations should be fairly performant, but it adds "some time" to the build, somewhat depending on the Git history size.
If you want, you can run without during development and turn it on when deploying to the live server: `hugo --enableGitInfo`.
Fixes#2102
changes:
- in hugolib/page.go, `func permalink` and `func TargetPath`
Fixed the attempt to *replace* the extension of something
that was *already* a basename.
- in source/file.go, `func NewFile`
added check for allowed languages before translating filename
Fixes#2555
All config variables starts with low-case and uses camelCase.
If there is abbreviation at the beginning of the name, the whole
abbreviation will be written in low-case.
If there is abbreviation at the end of the name, the
whole abbreviation will be written in upper-case.
For example, rssURI.
The gain, given the "real sites benchmark" below, is obvious:
```
benchmark old ns/op new ns/op delta
BenchmarkHugo-4 14497594101 13084156335 -9.75%
benchmark old allocs new allocs delta
BenchmarkHugo-4 57404335 48282002 -15.89%
benchmark old bytes new bytes delta
BenchmarkHugo-4 9933505624 9721984424 -2.13%
```
Fixes#2495
Also refactor the rendering pages test to accept more than one page source per test run, which wasn't really needed for this issue, but may be in the future.
Closes#2586Fixes#2538
Maps in Viper, Hugo's config backing store, is now properly lower-cased not just on top level, the current situation.
While this is mostly a good thing, as you don't need to know the original casing to look up a value, it will be breaking for people doing direct lookups in the ´Site.Params` map.
We will try to find a solution to this "breakage", but the recommended method to get params values is via the `.Param` methods.
This method is now implemented on `Node`, `Page` and `Site` and is case-insensitive:
* Use `.Param "someKey" ` if you want page param with fall back to site param if not found on page.
* Use `.Site.Param "someKey"` to get a site param
See #2590
This change adds a canonical alias.html template that is used for page
redirects, and passes the page as data to the template under .Page
Fixes#2533Closes#2576
Add DocumentName (path to the file being rendered) to RenderingContext
and use that information to include the path in the error print.
See #2399Closes#2567
There were some breaking changes etc. that is too late to fix for 0.17.
Let us think this through and add proper author support for Hugo 0.18.
Fixes#2464
Revert "docs: Add documentation for author profiles"
This reverts commit b6673e5309.
Revert "Add First Class Author Support"
This reverts commit cf978c0649.
This avoids having to execute these expensive operations for sites not using these values.
This commit sums up a set of wordcounting and autosummary related performance improvements.
The effect of these kind of depends on what features your site use, but a benchmark from 4 Hugo sites in the wild shows promise:
```
benchmark old ns/op new ns/op delta
BenchmarkHugo-4 21293005843 20032857342 -5.92%
benchmark old allocs new allocs delta
BenchmarkHugo-4 65290922 65186032 -0.16%
benchmark old bytes new bytes delta
BenchmarkHugo-4 9771213416 9681866464 -0.91%
```
Closes#2378
It is obviously more efficient when we do not care about the actual words.
```
BenchmarkTotalWords-4 100000 18795 ns/op 0 B/op 0 allocs/op
BenchmarkTotalWordsOld-4 30000 46751 ns/op 6400 B/op 1 allocs/op
```
For people using autogenerated summaries, this is one of the hot spots in the memory department.
We don't need to split al the content into words to do proper summary truncation.
This is obviously more effective:
```
BenchmarkTestTruncateWordsToWholeSentence-4 300000 4720 ns/op 0 B/op 0 allocs/op
BenchmarkTestTruncateWordsToWholeSentenceOld-4 100000 17699 ns/op 3072 B/op 3 allocs/op
```
Hugo 0.16 announced support for symbolic links for the root folders, /content, /static etc., but this got broken pretty fast.
The main problem this commit tries to solve is the matching of file change events to "what changed".
An example:
ContentDir: /mysites/site/content where /mysites/site/content is a symlink to /mycontent
/mycontent:
/mypost1.md
/post/mypost2.md
* A change to mypost1.md (on OS X) will trigger a file change event with name "/mycontent/mypost1.md"
* A change to mypost2.md gives event with name "/mysites/site/content/mypost2.md"
The first change will not trigger a correct update of Hugo before this commit. This commit fixes this by doing a two-step check:
1. Check if "/mysites/site/content/mypost2.md" is within /mysites/site/content
2. Check if "/mysites/site/content/mypost2.md" is within the real path that /mysites/site/content points to
Fixes#2265Closes#2273
Atomic operations with 64 bit values must be aligned for 64-bit on x86-32.
According to the spec:
"The first word in a global variable or in an allocated struct or slice can be relied upon to be 64-bit aligned."
The above wasn't enough for the `paginationPageCount` on `SiteInfo`, maybe due to how `SiteInfo` is embedded.
This commit adds a 4 byte padding before the `uint64` that creates the correct alignment.
Fixes#2415
This is the nth attempt to fix an issue by changing the placeholder token pattern, but
now we actually have tests for all the historic trouble cases.
Fixes#2223
So the Permalink gets correct when listing translations.
I have also checked the other relevant places to make sure we do not overwrite node values we need later.
Pointers can be tricky, but lesson learned is: A copy is cheap.
Updates #2309
In a multi-language setup, before this commit the Node's Translations() method
would return some "dummy nodes" that would point to the correct page (Permalink),
but would not be the same as the node it points to -- it would not have the translated
title etc.
The node creation is, however, so mingled with rendering, whihc is too early to have any global state,
so the nodes has to be split in a prepare and a render phase. This commits does that with as small
a change as possible. This implementation is a temp solution until we fix#2297.
Updates #2309
The current "rendering language" is needed outside of Site. This commit moves the Language type to the helpers package, and then used to get correct correct language configuration in the markdownify template func.
This commit also adds two new template funcs: relLangURL and absLangURL.
See #2309
This is needed to verify #2309, but it closes a big hole in Hugo's automated tests.
The loading of the config is now moved to `hugolib` and the same default settings are now used
in production and tests.
As Viper now uses Afero as its filesystem, we now can write fairly complete integration tests with ease.
See #2309
And in the same go adjusted some minor parts of the language API:
Add LanguagePrefix alias to Node and rename the Multilingual config section to Languages.
See #2309
This is needed to make shortcode users happy with the new multilanguage support,
but it will also solve many other related posts about "stuff not available in the shortcode".
We will have to revisit this re the handler chain at some point, but that will be easier
now as the integration test story has improved so much.
As part of this commit, the site-building tests in page_test.go is refreshed, they now
tests for all the rendering engines (when available), and all of them now uses the
same code-path as used in production.
Fixes#1229Fixes#2323
Fixes ##1076
Work In Progress!
This commit makes a rework of the build and rebuild process to better suit a multi-site setup.
This also includes a complete overhaul of the site tests. Previous these were a messy mix that
were testing just small parts of the build chain, some of it testing code-paths not even used in
"real life". Now all tests that depends on a built site follows the same and real production code path.
See #2309Closes#2211Closes#477Closes#1744
This commit also consolidates URLs on Node vs Page, so now .Permalink should be interoperable.
Note that this implementations should be fairly short-livded, waiting for #2297, but the API should be stable.
Setting the language to use when loading the language bundles just doesn't work.
The template system is unfortanetely a global, and the last languate processed won ...
And a Hugo global variable which contains the site under build.
This is really needed to get some level of control of the "multiple languages" in play.
There are still work related to this scattered around, but that will come.
With this commit, the multilingual feature is starting to work.
Implements:
* support to render:
* content/post/whatever.en.md to /en/2015/12/22/whatever/index.html
* content/post/whatever.fr.md to /fr/2015/12/22/whatever/index.html
* gets enabled when `Multilingual:` is specified in config.
* support having language switchers in templates, that know
where the translated page is (with .Page.Translations)
(when you're on /en/about/, you can have a "Francais" link pointing to
/fr/a-propos/)
* all translations are in the `.Page.Translations` map, including the current one.
* easily tweak themes to support Multilingual mode
* renders in a single swift, no need for two config files.
Adds a couple of variables useful for multilingual sites
Adds documentation (content/multilingual.md)
Added language prefixing for all URL generation/permalinking see in the
code base.
Implements i18n. Leverages the great github.com/nicksnyder/go-i18n lib.. thanks Nick.
* Adds "i18n" and "T" template functions..
We have to figure out another way. There are perfectly valid reasons not having a layout for a page (I have have some broken sites as result of this).
See #1313
This reverts commit b15934008f.
This issue was introduced as a fix to shortcode not working in RST.
One could argue that Blackfriday and friends should handle `#` in titles, but that will be a discussion
for another day.
The new placeholder pattern should be RST safe and work with titles.
And now with a test so this doesn't break again.
Fixes#2192Fixes#2209Closes#2210
Useful if using or sharing files with users that use editors that
append a unicode byte order marker header (like Windows notepad).
This will still assume files are UTF-8 encoded.
Closes#2075
If Page.Markup was not set by the user, it will now be set after
guessing from the file extension. This means, Page.Markup will be set in
any case. It can be used by a theme to differentiate between markup
types.
Fixes#1950
Meny people, including me, have a custom robots.txt in static.
Also remove that option from the command line; it doesn't feel
important enough.
Fixes ##2049
This also includes a refactor of the hugofs package and its usage.
The motivation for that is:
The Afero filesystems are brilliant. Hugo's way of adding a dozen of global variables for the different filesystems was a mistake. In readFile (and also in some other places in Hugo today) we need a way to restrict the access inside the working dir. We could use ioutil.ReadFile and implement the path checking, checking the base path and the dots ("..") etc. But it is obviously better to use an Afero BasePathFs combined witha ReadOnlyFs. We could create a use-once-filesystem and handle the initialization ourselves, but since this is also useful to others and the initialization depends on some other global state (which would mean to create a new file system on every invocation), we might as well do it properly and encapsulate the predefined set of filesystems. This change also leads the way, if needed, to encapsulate the file systems in a struct, making it possible to have several file system sets in action at once (parallel multilanguage site building? With Moore's law and all...)
Fixes#1551
It is a fairly costly operation:
```
benchmark old ns/op new ns/op delta
BenchmarkScratchGet-4 109 31.6 -71.01%
benchmark old allocs new allocs delta
BenchmarkScratchGet-4 0 0 +0.00%
benchmark old bytes new bytes delta
BenchmarkScratchGet-4 0 0 +0.00%
´´´
This uses the Emoji map from https://github.com/kyokomi/emoji -- but with a custom replacement implementation.
The built-in are fine for most use cases, but in Hugo we do care about pure speed.
The benchmarks below are skewed in Hugo's direction as the source and result is a byte slice,
Kyokomi's implementation works best with strings.
Curious: The easy-to-use `strings.Replacer` is also plenty fast.
```
BenchmarkEmojiKyokomiFprint-4 20000 86038 ns/op 33960 B/op 117 allocs/op
BenchmarkEmojiKyokomiSprint-4 20000 83252 ns/op 38232 B/op 122 allocs/op
BenchmarkEmojiStringsReplacer-4 100000 21092 ns/op 17248 B/op 25 allocs/op
BenchmarkHugoEmoji-4 500000 5728 ns/op 624 B/op 13 allocs/op
```
Fixes#1891
We can of course skip reading the entire byte slice again and again.
This was a slip in the original implementation; functionally the same,
but is slightly faster, esp. for larger data sets with many shortcodes:
```
benchmark old ns/op new ns/op delta
BenchmarkReplaceShortcodeTokens-4 15505 14753 -4.85%
benchmark old allocs new allocs delta
BenchmarkReplaceShortcodeTokens-4 1 1 +0.00%
benchmark old bytes new bytes delta
BenchmarkReplaceShortcodeTokens-4 3072 3072 +0.00%
```
Site.ReadPagesFromSource returns nil chan error value when a site
content directory is empty but its receiver expects to be passed
something error values via the channel.
This fixes it by returning a channel which will be immediately closed.
Fix#1797
Cobra, the CLI commander in use in Hugo, has some long awaited improvements in the error handling department.
This enables a more centralized error handling approach.
This commit introduces that by changing all the command funcs to `RunE`:
* The core part of the error logging, usage logging and `os.Exit(-1)` is now performed in one place and that one place only.
* The usage text is now only shown on invalid arguments etc. (user errors)
Fixes#1502
It would be helpful to know whether a shortcode was called with positional or
named parameters. This commit adds a boolean `IsNamedParams` property to the
`ShortcodeWithPage` struct.
Currently a `[]byte` copy is returned. In most cases this is the safe thing to do, but we should just modify/grow the slice as needed.
This is faster and consumes less memory:
```
benchmark old ns/op new ns/op delta
BenchmarkReplaceShortcodeTokens-4 7350 4419 -39.88%
benchmark old allocs new allocs delta
BenchmarkReplaceShortcodeTokens-4 5 1 -80.00%
benchmark old bytes new bytes delta
BenchmarkReplaceShortcodeTokens-4 4816 1152 -76.08%
```
This commit is aso a small spring cleaning of duplicated code in the different `PageConvert` methods.
Fixes#1516
Page.GroupByParam function internally uses Page.GetParam to get a
parameter value for a key of a page group but now Page.GetParam returns
a lowercase character string every time. It has no need to using
lowercase character string as a group key value and it confuse a
function user.
This fixes it to keep and return an original parameter string as a group
key value.
Fix#1564
* add global `hasCJKLanguage` flag, if true, turn on auto-detecting CJKLanguage
* add `isCJKLanguage` frontmatter to force specify whether is CJKLanguage or not
* For .Summary: If isCJKLanguage is true, use the runes as basis for truncation, else keep as today.
* For WordCount: If isCJKLanguage is true, use the runes as basis for calculation, else keep as today.
* Unexport RuneCount
Fixes#1377
