We still have go-toml as a transitive dependency, and it is the way to go eventually, but we care about speed, so let us wait that one out.
Note that the issue this fixes is about taxonomies, but I guess this is a general issue for sites with many pages that uses TOML as front matter.
```
benchmark old ns/op new ns/op delta
BenchmarkFrontmatterTags/TOML:1-4 23206 8543 -63.19%
BenchmarkFrontmatterTags/TOML:11-4 80117 18495 -76.92%
BenchmarkFrontmatterTags/TOML:21-4 140676 28727 -79.58%
benchmark old allocs new allocs delta
BenchmarkFrontmatterTags/TOML:1-4 173 60 -65.32%
BenchmarkFrontmatterTags/TOML:11-4 625 138 -77.92%
BenchmarkFrontmatterTags/TOML:21-4 1106 210 -81.01%
benchmark old bytes new bytes delta
BenchmarkFrontmatterTags/TOML:1-4 9231 2912 -68.45%
BenchmarkFrontmatterTags/TOML:11-4 19808 5184 -73.83%
BenchmarkFrontmatterTags/TOML:21-4 31200 7536 -75.85%
```
See #3541
Updates #3464
This commit adds a work flow aroung GoReleaser to get the Hugo release process automated and more uniform:
* It can be run fully automated or in two steps to allow for manual edits of the relase notes.
* It supports both patch and full releases.
* It fetches author, issue, repo info. etc. for the release notes from GitHub.
* The file names produced are mainly the same as before, but we no use tar.gz as archive for all Unix versions.
* There isn't a fully automated CI setup in place yet, but the release tag is marked in the commit message with "[ci deploy]"
Fixes#3358
This makes it consistent with how it behaves when it's set in config.toml.
This commit also unifies BaseURL in Site.Info so we now have one source for this value.
Fixes#3262
This commit also adds a new command, docshelper, with some utility funcs that adds a JSON datafiles to /docs/data that would be a pain to create and maintain by hand.
Fixes#3242
Lots of cleanups here:
- Refactor InterfaceToConfig and InterfaceToFrontMatter to use io.Writer.
- Simplify InterfaceToFrontMatter by wrapping InterfaceToConfig.
- Export FrontmatterType since we return it in DetectFrontMatter.
- Refactor removeTOMLIdentifier to avoid blindly replacing "+++".
- Update HandleJSONMetaData to return an empty map on nil input.
- Updates vendored goorgeous package and test for org-mode frontmatter.
- Add tests and godoc comments.
Coverage for parser package increased from 45.2% to 85.2%.
Note that this looks like overkill for just the logger, and that is correct,
but this will make sense once we start with the template handling etc.
Updates #2701
To make it easier to follow and understand.
Both building and rebuilding now follow a four step flow:
1. Init
2. Process
3. Assemble
4. Render
And now there are only one Build method, used for both builds and rebuilds.
Updates #2297
* Add information about average time, memory consumption and
allocations.
* Fix situation, when user provides memprofile and cpuprofile, but
cpuprofile will not created.
Fixes#2432
This commit adds a `GitInfo` object to `Page` if `EnableGitInfo` is set.
It then also sets `Lastmod` for the given `Page` to the author date provided by Git.
The Git integrations should be fairly performant, but it adds "some time" to the build, somewhat depending on the Git history size.
If you want, you can run without during development and turn it on when deploying to the live server: `hugo --enableGitInfo`.
Fixes#2102
All config variables starts with low-case and uses camelCase.
If there is abbreviation at the beginning of the name, the whole
abbreviation will be written in low-case.
If there is abbreviation at the end of the name, the
whole abbreviation will be written in upper-case.
For example, rssURI.
Changes `%q` to `%s`. `%q` was safely escaping the `\` in windows so that it was printing `\\`. Uses `filepath.Join` for example filepath so that the output is OS specific and since this required splitting up the multiline string, it's refactored into a separate function..
Fixes#2401
* Fall back to default language on missing translation file
* Add a i18n-warnings build flag
* If that flag is set, print a parseable and greppable string on missing translation strings
See #2303
And in the same go adjusted some minor parts of the language API:
Add LanguagePrefix alias to Node and rename the Multilingual config section to Languages.
See #2309
Work In Progress!
This commit makes a rework of the build and rebuild process to better suit a multi-site setup.
This also includes a complete overhaul of the site tests. Previous these were a messy mix that
were testing just small parts of the build chain, some of it testing code-paths not even used in
"real life". Now all tests that depends on a built site follows the same and real production code path.
See #2309Closes#2211Closes#477Closes#1744
And a Hugo global variable which contains the site under build.
This is really needed to get some level of control of the "multiple languages" in play.
There are still work related to this scattered around, but that will come.
With this commit, the multilingual feature is starting to work.
Implements:
* support to render:
* content/post/whatever.en.md to /en/2015/12/22/whatever/index.html
* content/post/whatever.fr.md to /fr/2015/12/22/whatever/index.html
* gets enabled when `Multilingual:` is specified in config.
* support having language switchers in templates, that know
where the translated page is (with .Page.Translations)
(when you're on /en/about/, you can have a "Francais" link pointing to
/fr/a-propos/)
* all translations are in the `.Page.Translations` map, including the current one.
* easily tweak themes to support Multilingual mode
* renders in a single swift, no need for two config files.
Adds a couple of variables useful for multilingual sites
Adds documentation (content/multilingual.md)
Added language prefixing for all URL generation/permalinking see in the
code base.
Implements i18n. Leverages the great github.com/nicksnyder/go-i18n lib.. thanks Nick.
* Adds "i18n" and "T" template functions..
Hugo seems to ignore the meminterval I specify and always uses it's default of 100ms.
This seems to be because Hugo tries to take the meminterval from the command line
(an Int) and converts it to a String and passes it to time.ParseDuration. If you pass a
different meminterval (such as `1000` as above) it will fail (time.ParseDuration requires
some units) and use the default instead.
Changed `meminterval` to be a String and added better documentation for valid time units.
Resolves: #2325
On 4679fbee41, rebuild was disabled on
CHMOD filesystem events, but the code is overly aggressive.
In some situations, specially with older Mac's (using a Late 2008
Macbook), the events we receive might be aggregated. On my
particular laptop, I get this events:
INFO: 2016/07/26 18:08:51 hugo.go:737: Received System Events: ["<path>": WRITE|CHMOD]
These events are ignored because the code only checks for Chmod. This
commit fixes this by checking that the event is also not a Write or Create.
Related to #1587.
Meny people, including me, have a custom robots.txt in static.
Also remove that option from the command line; it doesn't feel
important enough.
Fixes ##2049
This disables highlighting for fenced code blocks without explicitly specified language. It also introduces a new `PygmentsCodeFencesGuessSyntax` config option (defaulting to false).
To enable syntax guessing again, add the following to your config file: `PygmentsCodeFencesGuessSyntax = true`
This is a breaking change.
This also includes a refactor of the hugofs package and its usage.
The motivation for that is:
The Afero filesystems are brilliant. Hugo's way of adding a dozen of global variables for the different filesystems was a mistake. In readFile (and also in some other places in Hugo today) we need a way to restrict the access inside the working dir. We could use ioutil.ReadFile and implement the path checking, checking the base path and the dots ("..") etc. But it is obviously better to use an Afero BasePathFs combined witha ReadOnlyFs. We could create a use-once-filesystem and handle the initialization ourselves, but since this is also useful to others and the initialization depends on some other global state (which would mean to create a new file system on every invocation), we might as well do it properly and encapsulate the predefined set of filesystems. This change also leads the way, if needed, to encapsulate the file systems in a struct, making it possible to have several file system sets in action at once (parallel multilanguage site building? With Moore's law and all...)
Fixes#1551
NewContent is refactored to use the afero.Fs interface that should allow
full testing. This commit also pulls the metadata creation logic out of
NewContent and into a separate function to decrease the cyclomatic
complexity of NewContent.
This uses the Emoji map from https://github.com/kyokomi/emoji -- but with a custom replacement implementation.
The built-in are fine for most use cases, but in Hugo we do care about pure speed.
The benchmarks below are skewed in Hugo's direction as the source and result is a byte slice,
Kyokomi's implementation works best with strings.
Curious: The easy-to-use `strings.Replacer` is also plenty fast.
```
BenchmarkEmojiKyokomiFprint-4 20000 86038 ns/op 33960 B/op 117 allocs/op
BenchmarkEmojiKyokomiSprint-4 20000 83252 ns/op 38232 B/op 122 allocs/op
BenchmarkEmojiStringsReplacer-4 100000 21092 ns/op 17248 B/op 25 allocs/op
BenchmarkHugoEmoji-4 500000 5728 ns/op 624 B/op 13 allocs/op
```
Fixes#1891
See #1772
Also, force DisableLiveReload to true when running "hugo --watch"
(build-only non-server mode) to prevent livereload.ForceRefresh(),
which would end up blocking watchConfig() forever, from being called
because livereload.Initialize() is never called in this case.
This fixes the bug where "hugo --watch" could only reload config.toml
once before it gets stuck for good at livereload.ForceRefresh().
This is also consistent with Hugo's existing behaviour:
Non-server "hugo --watch" has never injected livereload.js
since the inception of the "watch" feature in Hugo v0.12.
Update on the watcher copy static to copy only the
changed files and add an flag forceSyncStatic to
copy all statics always a static is changed
See #1644#1559
especially when the given `--source` path is a relative directory.
Also, when `--source` is specified, make WorkingDir an absolute path
from the very beginning, to be consistent with the case when `--source`
is not given. Otherwise, the function name helpers.AbsPathify(), which
prepends WorkingDir to a relative path, does not really make sense.
Fixes#1721
v0.15 had it, but I removed it inadvertently for 0.16-DEV
in commit 00d04774 in PR #1652.
Also add directory bash-completion for `--source`
for `hugo convert`, `hugo list` and `hugo new`.
See #1624, #1589
The crash was introduced by commit 00d04774 in PR #1652
where access to NoTimes was attempted even though --noTimes
was not defined for the config, check and benchmark commands.
Special thanks to @bep for the heads-up!
See also #1624 - CLI UX: Flags shouldn't be global
This is to ensure that only the relevant command-line flags
for a certain Hugo subcommand is shown to the end user,
reducing clutter and improving user experience.
Fixes#1624 - CLI UX: Flags shouldn't be global
Cobra, the CLI commander in use in Hugo, has some long awaited improvements in the error handling department.
This enables a more centralized error handling approach.
This commit introduces that by changing all the command funcs to `RunE`:
* The core part of the error logging, usage logging and `os.Exit(-1)` is now performed in one place and that one place only.
* The usage text is now only shown on invalid arguments etc. (user errors)
Fixes#1502
Hugo command provides "noTimes" flag but it doesn't affect synced files
timestamp regardless of whether the flag is specified or not.
This fixes it by adding a flag check and overwriting configuration if it
is specified.
Fix#1583
Hugo command doesn't copy site's "static" directory files to "public"
directory if a specified theme doesn't have "static" directory because
theme's "static" directory checking always returns an error.
This fixes it by just showing a warning message about theme's "static"
directory absence and not skipping following processes.
Fix#1655
Write and rename operations are often followed by CHMOD.
There may be valid use cases for rebuilding the site on CHMOD,
but that will require more complex logic than this simple conditional.
On OS X this seems to be related to Spotlight, see:
https://github.com/go-fsnotify/fsnotify/issues/15
A workaround is to put your site(s) on the Spotlight exception list,
but that may be a little mysterious for most end users.
So, for now, we skip reload on CHMOD.
This small commit will be a 100% improvement for most OS X-users.
Fixes#1587
If flag is passed the site will be created inside non-empty folder
only if there are no existent folders or config with the same name
hugo creates.
Resolves: #1163
The lack of the directory would be worth to warn, since the directory is
created by "huge new site". But it doesn't have to fail the build.
This change fixes#759.
* add global `hasCJKLanguage` flag, if true, turn on auto-detecting CJKLanguage
* add `isCJKLanguage` frontmatter to force specify whether is CJKLanguage or not
* For .Summary: If isCJKLanguage is true, use the runes as basis for truncation, else keep as today.
* For WordCount: If isCJKLanguage is true, use the runes as basis for calculation, else keep as today.
* Unexport RuneCount
Fixes#1377
usage: hugo import jekyll jekyll_root_path target_path
Implemented:
* Create new hugo site
* Create config.yaml
* Convert all markdown contents.
* Copy all other files and folders to static
Fixes#101
It currently handles --baseUrl to --baseURL, and --uglyUrls to --uglyURLs.
Special thanks to Eric Paris (@eparis) for writing the
"normalized name" support in Cobra, and for showing us
how it is used in Kubernetes.
See Issue #959
As of 2015-08-16, Viper no longer searches the CWD
for config file by default to avoid unintended surprises,
but Hugo relies on the original behaviour.
Fixed by calling
viper.AddConfigPath(".")
at the appropriate place.
See https://github.com/spf13/viper/issues/73 for more information.
Fixes#1363
This commit adds a new PygmentsCodeFences config option (default false), which if true will allow GitHub style backtick code fences around code, which will then be rendered by Pygments.
For example:
``` language
your code
```
can be used instead of {{< highlight language >}}your code {{< /highlight >}}.
Fixes#362
