hugo/hugolib/config.go

525 lines
14 KiB
Go
Raw Normal View History

// Copyright 2019 The Hugo Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package hugolib
import (
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
"os"
"path/filepath"
"strings"
"github.com/gohugoio/hugo/common/hexec"
"github.com/gohugoio/hugo/common/types"
"github.com/gohugoio/hugo/common/maps"
cpaths "github.com/gohugoio/hugo/common/paths"
"github.com/gobwas/glob"
hglob "github.com/gohugoio/hugo/hugofs/glob"
"github.com/gohugoio/hugo/common/loggers"
"github.com/gohugoio/hugo/cache/filecache"
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
"github.com/gohugoio/hugo/parser/metadecoders"
"errors"
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
"github.com/gohugoio/hugo/common/herrors"
"github.com/gohugoio/hugo/common/hugo"
Add support for theme composition and inheritance This commit adds support for theme composition and inheritance in Hugo. With this, it helps thinking about a theme as a set of ordered components: ```toml theme = ["my-shortcodes", "base-theme", "hyde"] ``` The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right. So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`. Hugo uses two different algorithms to merge the filesystems, depending on the file type: * For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files. * For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen. The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically. Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure: * `params` (global and per language) * `menu` (global and per language) * `outputformats` and `mediatypes` The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts. A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others. Fixes #4460 Fixes #4450
2018-03-01 09:01:25 -05:00
"github.com/gohugoio/hugo/langs"
"github.com/gohugoio/hugo/modules"
Add support for theme composition and inheritance This commit adds support for theme composition and inheritance in Hugo. With this, it helps thinking about a theme as a set of ordered components: ```toml theme = ["my-shortcodes", "base-theme", "hyde"] ``` The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right. So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`. Hugo uses two different algorithms to merge the filesystems, depending on the file type: * For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files. * For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen. The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically. Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure: * `params` (global and per language) * `menu` (global and per language) * `outputformats` and `mediatypes` The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts. A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others. Fixes #4460 Fixes #4450
2018-03-01 09:01:25 -05:00
"github.com/gohugoio/hugo/config"
"github.com/gohugoio/hugo/config/privacy"
"github.com/gohugoio/hugo/config/security"
"github.com/gohugoio/hugo/config/services"
"github.com/gohugoio/hugo/helpers"
"github.com/spf13/afero"
)
var ErrNoConfigFile = errors.New("Unable to locate config file or config directory. Perhaps you need to create a new site.\n Run `hugo help new` for details.\n")
// LoadConfig loads Hugo configuration into a new Viper and then adds
// a set of defaults.
func LoadConfig(d ConfigSourceDescriptor, doWithConfig ...func(cfg config.Provider) error) (config.Provider, []string, error) {
if d.Environment == "" {
d.Environment = hugo.EnvironmentProduction
}
if len(d.Environ) == 0 && !hugo.IsRunningAsTest() {
d.Environ = os.Environ()
}
var configFiles []string
l := configLoader{ConfigSourceDescriptor: d, cfg: config.New()}
// Make sure we always do this, even in error situations,
// as we have commands (e.g. "hugo mod init") that will
// use a partial configuration to do its job.
defer l.deleteMergeStrategies()
for _, name := range d.configFilenames() {
var filename string
filename, err := l.loadConfig(name)
if err == nil {
configFiles = append(configFiles, filename)
} else if err != ErrNoConfigFile {
return nil, nil, l.wrapFileError(err, filename)
}
}
if d.AbsConfigDir != "" {
dcfg, dirnames, err := config.LoadConfigFromDir(l.Fs, d.AbsConfigDir, l.Environment)
if err == nil {
if len(dirnames) > 0 {
l.cfg.Set("", dcfg.Get(""))
configFiles = append(configFiles, dirnames...)
}
} else if err != ErrNoConfigFile {
if len(dirnames) > 0 {
return nil, nil, l.wrapFileError(err, dirnames[0])
}
return nil, nil, err
}
}
if err := l.applyConfigDefaults(); err != nil {
return l.cfg, configFiles, err
}
l.cfg.SetDefaultMergeStrategy()
// We create languages based on the settings, so we need to make sure that
// all configuration is loaded/set before doing that.
for _, d := range doWithConfig {
if err := d(l.cfg); err != nil {
return l.cfg, configFiles, err
}
}
// Some settings are used before we're done collecting all settings,
// so apply OS environment both before and after.
if err := l.applyOsEnvOverrides(d.Environ); err != nil {
return l.cfg, configFiles, err
}
modulesConfig, err := l.loadModulesConfig()
if err != nil {
return l.cfg, configFiles, err
}
// Need to run these after the modules are loaded, but before
// they are finalized.
collectHook := func(m *modules.ModulesConfig) error {
// We don't need the merge strategy configuration anymore,
// remove it so it doesn't accidentally show up in other settings.
l.deleteMergeStrategies()
if err := l.loadLanguageSettings(nil); err != nil {
return err
}
mods := m.ActiveModules
// Apply default project mounts.
if err := modules.ApplyProjectConfigDefaults(l.cfg, mods[0]); err != nil {
return err
}
return nil
}
_, modulesConfigFiles, modulesCollectErr := l.collectModules(modulesConfig, l.cfg, collectHook)
if err != nil {
return l.cfg, configFiles, err
}
configFiles = append(configFiles, modulesConfigFiles...)
if err := l.applyOsEnvOverrides(d.Environ); err != nil {
return l.cfg, configFiles, err
}
if err = l.applyConfigAliases(); err != nil {
return l.cfg, configFiles, err
}
if err == nil {
err = modulesCollectErr
}
return l.cfg, configFiles, err
}
// LoadConfigDefault is a convenience method to load the default "config.toml" config.
func LoadConfigDefault(fs afero.Fs) (config.Provider, error) {
v, _, err := LoadConfig(ConfigSourceDescriptor{Fs: fs, Filename: "config.toml"})
return v, err
}
// ConfigSourceDescriptor describes where to find the config (e.g. config.toml etc.).
type ConfigSourceDescriptor struct {
Fs afero.Fs
Logger loggers.Logger
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
// Path to the config file to use, e.g. /my/project/config.toml
Filename string
// The path to the directory to look for configuration. Is used if Filename is not
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
// set or if it is set to a relative filename.
Path string
// The project's working dir. Is used to look for additional theme config.
WorkingDir string
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
// The (optional) directory for additional configuration files.
AbsConfigDir string
// production, development
Environment string
// Defaults to os.Environ if not set.
Environ []string
}
func (d ConfigSourceDescriptor) configFileDir() string {
if d.Path != "" {
return d.Path
}
return d.WorkingDir
}
func (d ConfigSourceDescriptor) configFilenames() []string {
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
if d.Filename == "" {
return []string{"config"}
}
return strings.Split(d.Filename, ",")
}
// SiteConfig represents the config in .Site.Config.
type SiteConfig struct {
// This contains all privacy related settings that can be used to
// make the YouTube template etc. GDPR compliant.
Privacy privacy.Config
// Services contains config for services such as Google Analytics etc.
Services services.Config
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
}
type configLoader struct {
cfg config.Provider
ConfigSourceDescriptor
}
// Handle some legacy values.
func (l configLoader) applyConfigAliases() error {
aliases := []types.KeyValueStr{{Key: "taxonomies", Value: "indexes"}}
Add support for theme composition and inheritance This commit adds support for theme composition and inheritance in Hugo. With this, it helps thinking about a theme as a set of ordered components: ```toml theme = ["my-shortcodes", "base-theme", "hyde"] ``` The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right. So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`. Hugo uses two different algorithms to merge the filesystems, depending on the file type: * For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files. * For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen. The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically. Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure: * `params` (global and per language) * `menu` (global and per language) * `outputformats` and `mediatypes` The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts. A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others. Fixes #4460 Fixes #4450
2018-03-01 09:01:25 -05:00
for _, alias := range aliases {
if l.cfg.IsSet(alias.Key) {
vv := l.cfg.Get(alias.Key)
l.cfg.Set(alias.Value, vv)
}
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
}
return nil
}
func (l configLoader) applyConfigDefaults() error {
defaultSettings := maps.Params{
"cleanDestinationDir": false,
"watch": false,
"resourceDir": "resources",
"publishDir": "public",
"publishDirOrig": "public",
"themesDir": "themes",
"buildDrafts": false,
"buildFuture": false,
"buildExpired": false,
"environment": hugo.EnvironmentProduction,
"uglyURLs": false,
"verbose": false,
"ignoreCache": false,
"canonifyURLs": false,
"relativeURLs": false,
"removePathAccents": false,
"titleCaseStyle": "AP",
"taxonomies": maps.Params{"tag": "tags", "category": "categories"},
"permalinks": maps.Params{},
"sitemap": maps.Params{"priority": -1, "filename": "sitemap.xml"},
"disableLiveReload": false,
"pluralizeListTitles": true,
"forceSyncStatic": false,
"footnoteAnchorPrefix": "",
"footnoteReturnLinkContents": "",
"newContentEditor": "",
"paginate": 10,
"paginatePath": "page",
"summaryLength": 70,
"rssLimit": -1,
"sectionPagesMenu": "",
"disablePathToLower": false,
"hasCJKLanguage": false,
"enableEmoji": false,
"defaultContentLanguage": "en",
"defaultContentLanguageInSubdir": false,
"enableMissingTranslationPlaceholders": false,
"enableGitInfo": false,
"ignoreFiles": make([]string, 0),
"disableAliases": false,
"debug": false,
"disableFastRender": false,
"timeout": "30s",
"enableInlineShortcodes": false,
}
l.cfg.SetDefaults(defaultSettings)
return nil
}
func (l configLoader) applyOsEnvOverrides(environ []string) error {
if len(environ) == 0 {
return nil
}
const delim = "__env__delim"
// Extract all that start with the HUGO prefix.
// The delimiter is the following rune, usually "_".
const hugoEnvPrefix = "HUGO"
var hugoEnv []types.KeyValueStr
for _, v := range environ {
key, val := config.SplitEnvVar(v)
if strings.HasPrefix(key, hugoEnvPrefix) {
delimiterAndKey := strings.TrimPrefix(key, hugoEnvPrefix)
if len(delimiterAndKey) < 2 {
continue
}
// Allow delimiters to be case sensitive.
// It turns out there isn't that many allowed special
// chars in environment variables when used in Bash and similar,
// so variables on the form HUGOxPARAMSxFOO=bar is one option.
key := strings.ReplaceAll(delimiterAndKey[1:], delimiterAndKey[:1], delim)
key = strings.ToLower(key)
hugoEnv = append(hugoEnv, types.KeyValueStr{
Key: key,
Value: val,
})
}
}
for _, env := range hugoEnv {
existing, nestedKey, owner, err := maps.GetNestedParamFn(env.Key, delim, l.cfg.Get)
if err != nil {
return err
2021-03-21 08:29:11 -04:00
}
if existing != nil {
val, err := metadecoders.Default.UnmarshalStringTo(env.Value, existing)
2021-03-21 08:29:11 -04:00
if err != nil {
continue
2021-03-21 08:29:11 -04:00
}
if owner != nil {
owner[nestedKey] = val
2021-03-21 08:29:11 -04:00
} else {
l.cfg.Set(env.Key, val)
}
} else if nestedKey != "" {
owner[nestedKey] = env.Value
} else {
// The container does not exist yet.
l.cfg.Set(strings.ReplaceAll(env.Key, delim, "."), env.Value)
}
}
return nil
}
func (l configLoader) collectModules(modConfig modules.Config, v1 config.Provider, hookBeforeFinalize func(m *modules.ModulesConfig) error) (modules.Modules, []string, error) {
workingDir := l.WorkingDir
if workingDir == "" {
workingDir = v1.GetString("workingDir")
}
themesDir := cpaths.AbsPathify(l.WorkingDir, v1.GetString("themesDir"))
var ignoreVendor glob.Glob
if s := v1.GetString("ignoreVendorPaths"); s != "" {
ignoreVendor, _ = hglob.GetGlob(hglob.NormalizePath(s))
}
filecacheConfigs, err := filecache.DecodeConfig(l.Fs, v1)
if err != nil {
return nil, nil, err
}
secConfig, err := security.DecodeConfig(v1)
if err != nil {
return nil, nil, err
}
ex := hexec.New(secConfig)
v1.Set("filecacheConfigs", filecacheConfigs)
var configFilenames []string
hook := func(m *modules.ModulesConfig) error {
for _, tc := range m.ActiveModules {
if len(tc.ConfigFilenames()) > 0 {
if tc.Watch() {
configFilenames = append(configFilenames, tc.ConfigFilenames()...)
}
// Merge from theme config into v1 based on configured
// merge strategy.
v1.Merge("", tc.Cfg().Get(""))
}
}
if hookBeforeFinalize != nil {
return hookBeforeFinalize(m)
}
return nil
}
modulesClient := modules.NewClient(modules.ClientConfig{
Fs: l.Fs,
Logger: l.Logger,
Exec: ex,
HookBeforeFinalize: hook,
WorkingDir: workingDir,
ThemesDir: themesDir,
Environment: l.Environment,
CacheDir: filecacheConfigs.CacheDirModules(),
ModuleConfig: modConfig,
IgnoreVendor: ignoreVendor,
})
v1.Set("modulesClient", modulesClient)
moduleConfig, err := modulesClient.Collect()
// Avoid recreating these later.
v1.Set("allModules", moduleConfig.ActiveModules)
// We want to watch these for changes and trigger rebuild on version
// changes etc.
if moduleConfig.GoModulesFilename != "" {
configFilenames = append(configFilenames, moduleConfig.GoModulesFilename)
}
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
if moduleConfig.GoWorkspaceFilename != "" {
configFilenames = append(configFilenames, moduleConfig.GoWorkspaceFilename)
}
return moduleConfig.ActiveModules, configFilenames, err
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
}
func (l configLoader) loadConfig(configName string) (string, error) {
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
baseDir := l.configFileDir()
var baseFilename string
if filepath.IsAbs(configName) {
baseFilename = configName
} else {
baseFilename = filepath.Join(baseDir, configName)
}
var filename string
if cpaths.ExtNoDelimiter(configName) != "" {
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
exists, _ := helpers.Exists(baseFilename, l.Fs)
if exists {
filename = baseFilename
}
} else {
for _, ext := range config.ValidConfigFileExtensions {
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
filenameToCheck := baseFilename + "." + ext
exists, _ := helpers.Exists(filenameToCheck, l.Fs)
if exists {
filename = filenameToCheck
break
}
}
}
if filename == "" {
return "", ErrNoConfigFile
}
m, err := config.FromFileToMap(l.Fs, filename)
if err != nil {
return filename, err
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
}
// Set overwrites keys of the same name, recursively.
l.cfg.Set("", m)
Add /config dir support This commit adds support for a configuration directory (default `config`). The different pieces in this puzzle are: * A new `--environment` (or `-e`) flag. This can also be set with the `HUGO_ENVIRONMENT` OS environment variable. The value for `environment` defaults to `production` when running `hugo` and `development` when running `hugo server`. You can set it to any value you want (e.g. `hugo server -e "Sensible Environment"`), but as it is used to load configuration from the file system, the letter case may be important. You can get this value in your templates with `{{ hugo.Environment }}`. * A new `--configDir` flag (defaults to `config` below your project). This can also be set with `HUGO_CONFIGDIR` OS environment variable. If the `configDir` exists, the configuration files will be read and merged on top of each other from left to right; the right-most value will win on duplicates. Given the example tree below: If `environment` is `production`, the left-most `config.toml` would be the one directly below the project (this can now be omitted if you want), and then `_default/config.toml` and finally `production/config.toml`. And since these will be merged, you can just provide the environment specific configuration setting in you production config, e.g. `enableGitInfo = true`. The order within the directories will be lexical (`config.toml` and then `params.toml`). ```bash config ├── _default │   ├── config.toml │   ├── languages.toml │   ├── menus │   │   ├── menus.en.toml │   │   └── menus.zh.toml │   └── params.toml ├── development │   └── params.toml └── production ├── config.toml └── params.toml ``` Some configuration maps support the language code in the filename (e.g. `menus.en.toml`): `menus` (`menu` also works) and `params`. Also note that the only folders with "a meaning" in the above listing is the top level directories below `config`. The `menus` sub folder is just added for better organization. We use `TOML` in the example above, but Hugo also supports `JSON` and `YAML` as configuration formats. These can be mixed. Fixes #5422
2018-11-15 03:28:02 -05:00
return filename, nil
}
func (l configLoader) deleteMergeStrategies() {
l.cfg.WalkParams(func(params ...config.KeyParams) bool {
params[len(params)-1].Params.DeleteMergeStrategy()
return false
})
}
func (l configLoader) loadLanguageSettings(oldLangs langs.Languages) error {
_, err := langs.LoadLanguageSettings(l.cfg, oldLangs)
return err
}
func (l configLoader) loadModulesConfig() (modules.Config, error) {
modConfig, err := modules.DecodeConfig(l.cfg)
if err != nil {
return modules.Config{}, err
}
return modConfig, nil
}
func (configLoader) loadSiteConfig(cfg config.Provider) (scfg SiteConfig, err error) {
privacyConfig, err := privacy.DecodeConfig(cfg)
if err != nil {
return
}
servicesConfig, err := services.DecodeConfig(cfg)
if err != nil {
return
}
scfg.Privacy = privacyConfig
scfg.Services = servicesConfig
return
}
func (l configLoader) wrapFileError(err error, filename string) error {
fe := herrors.UnwrapFileError(err)
if fe != nil {
pos := fe.Position()
pos.Filename = filename
fe.UpdatePosition(pos)
return err
}
return herrors.NewFileErrorFromFile(err, filename, l.Fs, nil)
}