Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// Copyright 2019 The Hugo Authors. All rights reserved.
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
package hugofs
|
|
|
|
|
|
|
|
import (
|
2020-01-31 11:15:14 -05:00
|
|
|
"fmt"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
"io/ioutil"
|
|
|
|
"path/filepath"
|
2020-01-31 11:15:14 -05:00
|
|
|
"sort"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
"testing"
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
"github.com/spf13/viper"
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
qt "github.com/frankban/quicktest"
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
"github.com/gohugoio/hugo/htesting"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
"github.com/spf13/afero"
|
|
|
|
)
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func TestLanguageRootMapping(t *testing.T) {
|
2019-08-10 15:05:17 -04:00
|
|
|
c := qt.New(t)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
v := viper.New()
|
|
|
|
v.Set("contentDir", "content")
|
|
|
|
|
|
|
|
fs := NewBaseFileDecorator(afero.NewMemMapFs())
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("content/sv/svdir", "main.txt"), []byte("main sv"), 0755), qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/mysvblogcontent", "sv-f.txt"), []byte("some sv blog content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/myenblogcontent", "en-f.txt"), []byte("some en blog content in a"), 0755), qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/mysvblogcontent/d1", "sv-d1-f.txt"), []byte("some sv blog content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/myenblogcontent/d1", "en-d1-f.txt"), []byte("some en blog content in a"), 0755), qt.IsNil)
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/myotherenblogcontent", "en-f2.txt"), []byte("some en content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/mysvdocs", "sv-docs.txt"), []byte("some sv docs content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/b/myenblogcontent", "en-b-f.txt"), []byte("some en content"), 0755), qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
rfs, err := NewRootMappingFs(fs,
|
|
|
|
RootMapping{
|
|
|
|
From: "content/blog", // Virtual path, first element is one of content, static, layouts etc.
|
|
|
|
To: "themes/a/mysvblogcontent", // Real path
|
|
|
|
Meta: FileMeta{"lang": "sv"},
|
|
|
|
},
|
|
|
|
RootMapping{
|
|
|
|
From: "content/blog",
|
|
|
|
To: "themes/a/myenblogcontent",
|
|
|
|
Meta: FileMeta{"lang": "en"},
|
|
|
|
},
|
|
|
|
RootMapping{
|
|
|
|
From: "content/blog",
|
|
|
|
To: "content/sv",
|
|
|
|
Meta: FileMeta{"lang": "sv"},
|
|
|
|
},
|
|
|
|
RootMapping{
|
|
|
|
From: "content/blog",
|
|
|
|
To: "themes/a/myotherenblogcontent",
|
|
|
|
Meta: FileMeta{"lang": "en"},
|
|
|
|
},
|
|
|
|
RootMapping{
|
|
|
|
From: "content/docs",
|
|
|
|
To: "themes/a/mysvdocs",
|
|
|
|
Meta: FileMeta{"lang": "sv"},
|
|
|
|
},
|
|
|
|
)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
collected, err := collectFilenames(rfs, "content", "content")
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(collected, qt.DeepEquals,
|
|
|
|
[]string{"blog/d1/en-d1-f.txt", "blog/d1/sv-d1-f.txt", "blog/en-f.txt", "blog/en-f2.txt", "blog/sv-f.txt", "blog/svdir/main.txt", "docs/sv-docs.txt"}, qt.Commentf("%#v", collected))
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
dirs, err := rfs.Dirs(filepath.FromSlash("content/blog"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(len(dirs), qt.Equals, 4)
|
2020-01-31 11:15:14 -05:00
|
|
|
for _, dir := range dirs {
|
|
|
|
f, err := dir.Meta().Open()
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
f.Close()
|
|
|
|
}
|
|
|
|
|
|
|
|
blog, err := rfs.Open(filepath.FromSlash("content/blog"))
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
fis, err := blog.Readdir(-1)
|
|
|
|
for _, fi := range fis {
|
|
|
|
f, err := fi.(FileMetaInfo).Meta().Open()
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
f.Close()
|
|
|
|
}
|
|
|
|
blog.Close()
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
getDirnames := func(name string, rfs *RootMappingFs) []string {
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Helper()
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
filename := filepath.FromSlash(name)
|
|
|
|
f, err := rfs.Open(filename)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
names, err := f.Readdirnames(-1)
|
|
|
|
|
|
|
|
f.Close()
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
info, err := rfs.Stat(filename)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
f2, err := info.(FileMetaInfo).Meta().Open()
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
names2, err := f2.Readdirnames(-1)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(names2, qt.DeepEquals, names)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
f2.Close()
|
|
|
|
|
|
|
|
return names
|
|
|
|
}
|
|
|
|
|
|
|
|
rfsEn := rfs.Filter(func(rm RootMapping) bool {
|
|
|
|
return rm.Meta.Lang() == "en"
|
|
|
|
})
|
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(getDirnames("content/blog", rfsEn), qt.DeepEquals, []string{"d1", "en-f.txt", "en-f2.txt"})
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
rfsSv := rfs.Filter(func(rm RootMapping) bool {
|
|
|
|
return rm.Meta.Lang() == "sv"
|
|
|
|
})
|
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(getDirnames("content/blog", rfsSv), qt.DeepEquals, []string{"d1", "sv-f.txt", "svdir"})
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
// Make sure we have not messed with the original
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(getDirnames("content/blog", rfs), qt.DeepEquals, []string{"d1", "sv-f.txt", "en-f.txt", "svdir", "en-f2.txt"})
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(getDirnames("content", rfsSv), qt.DeepEquals, []string{"blog", "docs"})
|
|
|
|
c.Assert(getDirnames("content", rfs), qt.DeepEquals, []string{"blog", "docs"})
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
func TestRootMappingFsDirnames(t *testing.T) {
|
2019-08-10 15:05:17 -04:00
|
|
|
c := qt.New(t)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fs := NewBaseFileDecorator(afero.NewMemMapFs())
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
|
|
|
testfile := "myfile.txt"
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(fs.Mkdir("f1t", 0755), qt.IsNil)
|
|
|
|
c.Assert(fs.Mkdir("f2t", 0755), qt.IsNil)
|
|
|
|
c.Assert(fs.Mkdir("f3t", 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("f2t", testfile), []byte("some content"), 0755), qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
rfs, err := newRootMappingFsFromFromTo("", fs, "static/bf1", "f1t", "static/cf2", "f2t", "static/af3", "f3t")
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fif, err := rfs.Stat(filepath.Join("static/cf2", testfile))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(fif.Name(), qt.Equals, "myfile.txt")
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fifm := fif.(FileMetaInfo).Meta()
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(fifm.Filename(), qt.Equals, filepath.FromSlash("f2t/myfile.txt"))
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
root, err := rfs.Open("static")
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
|
|
|
dirnames, err := root.Readdirnames(-1)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(dirnames, qt.DeepEquals, []string{"af3", "bf1", "cf2"})
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
func TestRootMappingFsFilename(t *testing.T) {
|
2019-08-10 15:05:17 -04:00
|
|
|
c := qt.New(t)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
workDir, clean, err := htesting.CreateTempDir(Os, "hugo-root-filename")
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
defer clean()
|
|
|
|
fs := NewBaseFileDecorator(Os)
|
|
|
|
|
|
|
|
testfilename := filepath.Join(workDir, "f1t/foo/file.txt")
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(fs.MkdirAll(filepath.Join(workDir, "f1t/foo"), 0777), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, testfilename, []byte("content"), 0666), qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
rfs, err := newRootMappingFsFromFromTo(workDir, fs, "static/f1", filepath.Join(workDir, "f1t"), "static/f2", filepath.Join(workDir, "f2t"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
fi, err := rfs.Stat(filepath.FromSlash("static/f1/foo/file.txt"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fim := fi.(FileMetaInfo)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(fim.Meta().Filename(), qt.Equals, testfilename)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
_, err = rfs.Stat(filepath.FromSlash("static/f1"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
func TestRootMappingFsMount(t *testing.T) {
|
2019-08-10 15:05:17 -04:00
|
|
|
c := qt.New(t)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fs := NewBaseFileDecorator(afero.NewMemMapFs())
|
|
|
|
|
|
|
|
testfile := "test.txt"
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/mynoblogcontent", testfile), []byte("some no content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/myenblogcontent", testfile), []byte("some en content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/mysvblogcontent", testfile), []byte("some sv content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/mysvblogcontent", "other.txt"), []byte("some sv content"), 0755), qt.IsNil)
|
2019-12-30 04:50:00 -05:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/singlefiles", "no.txt"), []byte("no text"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join("themes/a/singlefiles", "sv.txt"), []byte("sv text"), 0755), qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
bfs := afero.NewBasePathFs(fs, "themes/a").(*afero.BasePathFs)
|
|
|
|
rm := []RootMapping{
|
2019-12-30 04:50:00 -05:00
|
|
|
// Directories
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-12-30 04:50:00 -05:00
|
|
|
From: "content/blog",
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
To: "mynoblogcontent",
|
|
|
|
Meta: FileMeta{"lang": "no"},
|
|
|
|
},
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-12-30 04:50:00 -05:00
|
|
|
From: "content/blog",
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
To: "myenblogcontent",
|
|
|
|
Meta: FileMeta{"lang": "en"},
|
|
|
|
},
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-12-30 04:50:00 -05:00
|
|
|
From: "content/blog",
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
To: "mysvblogcontent",
|
|
|
|
Meta: FileMeta{"lang": "sv"},
|
|
|
|
},
|
2019-12-30 04:50:00 -05:00
|
|
|
// Files
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-12-30 04:50:00 -05:00
|
|
|
From: "content/singles/p1.md",
|
|
|
|
To: "singlefiles/no.txt",
|
|
|
|
ToBasedir: "singlefiles",
|
|
|
|
Meta: FileMeta{"lang": "no"},
|
|
|
|
},
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-12-30 04:50:00 -05:00
|
|
|
From: "content/singles/p1.md",
|
|
|
|
To: "singlefiles/sv.txt",
|
|
|
|
ToBasedir: "singlefiles",
|
|
|
|
Meta: FileMeta{"lang": "sv"},
|
|
|
|
},
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
rfs, err := NewRootMappingFs(bfs, rm...)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
blog, err := rfs.Stat(filepath.FromSlash("content/blog"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2019-12-30 04:50:00 -05:00
|
|
|
c.Assert(blog.IsDir(), qt.Equals, true)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
blogm := blog.(FileMetaInfo).Meta()
|
2019-10-31 06:13:14 -04:00
|
|
|
c.Assert(blogm.Lang(), qt.Equals, "no") // First match
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
f, err := blogm.Open()
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
defer f.Close()
|
|
|
|
dirs1, err := f.Readdirnames(-1)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// Union with duplicate dir names filtered.
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(dirs1, qt.DeepEquals, []string{"test.txt", "test.txt", "other.txt", "test.txt"})
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
files, err := afero.ReadDir(rfs, filepath.FromSlash("content/blog"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(len(files), qt.Equals, 4)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
testfilefi := files[1]
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(testfilefi.Name(), qt.Equals, testfile)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
testfilem := testfilefi.(FileMetaInfo).Meta()
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(testfilem.Filename(), qt.Equals, filepath.FromSlash("themes/a/mynoblogcontent/test.txt"))
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
|
|
|
tf, err := testfilem.Open()
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
defer tf.Close()
|
2019-08-10 15:05:17 -04:00
|
|
|
b, err := ioutil.ReadAll(tf)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(string(b), qt.Equals, "some no content")
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
|
2020-12-16 06:11:32 -05:00
|
|
|
// Ambiguous
|
2020-01-31 11:15:14 -05:00
|
|
|
_, err = rfs.Stat(filepath.FromSlash("content/singles/p1.md"))
|
|
|
|
c.Assert(err, qt.Not(qt.IsNil))
|
2019-12-30 04:50:00 -05:00
|
|
|
|
|
|
|
singlesDir, err := rfs.Open(filepath.FromSlash("content/singles"))
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
defer singlesDir.Close()
|
|
|
|
singles, err := singlesDir.Readdir(-1)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(singles, qt.HasLen, 2)
|
|
|
|
for i, lang := range []string{"no", "sv"} {
|
|
|
|
fi := singles[i].(FileMetaInfo)
|
2020-01-22 05:57:23 -05:00
|
|
|
c.Assert(fi.Meta().PathFile(), qt.Equals, filepath.FromSlash("themes/a/singlefiles/"+lang+".txt"))
|
2019-12-30 04:50:00 -05:00
|
|
|
c.Assert(fi.Meta().Lang(), qt.Equals, lang)
|
|
|
|
c.Assert(fi.Name(), qt.Equals, "p1.md")
|
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
2019-07-30 12:34:41 -04:00
|
|
|
func TestRootMappingFsMountOverlap(t *testing.T) {
|
2019-08-10 15:05:17 -04:00
|
|
|
c := qt.New(t)
|
2019-07-30 12:34:41 -04:00
|
|
|
fs := NewBaseFileDecorator(afero.NewMemMapFs())
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.FromSlash("da/a.txt"), []byte("some no content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.FromSlash("db/b.txt"), []byte("some no content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.FromSlash("dc/c.txt"), []byte("some no content"), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.FromSlash("de/e.txt"), []byte("some no content"), 0755), qt.IsNil)
|
2019-07-30 12:34:41 -04:00
|
|
|
|
|
|
|
rm := []RootMapping{
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-07-30 12:34:41 -04:00
|
|
|
From: "static",
|
|
|
|
To: "da",
|
|
|
|
},
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-07-30 12:34:41 -04:00
|
|
|
From: "static/b",
|
|
|
|
To: "db",
|
|
|
|
},
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-07-30 12:34:41 -04:00
|
|
|
From: "static/b/c",
|
|
|
|
To: "dc",
|
|
|
|
},
|
2020-12-02 07:23:25 -05:00
|
|
|
{
|
2019-07-30 12:34:41 -04:00
|
|
|
From: "/static/e/",
|
|
|
|
To: "de",
|
|
|
|
},
|
|
|
|
}
|
|
|
|
|
|
|
|
rfs, err := NewRootMappingFs(fs, rm...)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2019-07-30 12:34:41 -04:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
checkDirnames := func(name string, expect []string) {
|
|
|
|
c.Helper()
|
2019-07-30 12:34:41 -04:00
|
|
|
name = filepath.FromSlash(name)
|
|
|
|
f, err := rfs.Open(name)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2019-07-30 12:34:41 -04:00
|
|
|
defer f.Close()
|
|
|
|
names, err := f.Readdirnames(-1)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(names, qt.DeepEquals, expect, qt.Commentf(fmt.Sprintf("%#v", names)))
|
2019-07-30 12:34:41 -04:00
|
|
|
}
|
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
checkDirnames("static", []string{"a.txt", "b", "e"})
|
|
|
|
checkDirnames("static/b", []string{"b.txt", "c"})
|
|
|
|
checkDirnames("static/b/c", []string{"c.txt"})
|
2019-07-30 12:34:41 -04:00
|
|
|
|
2019-08-09 02:09:15 -04:00
|
|
|
fi, err := rfs.Stat(filepath.FromSlash("static/b/b.txt"))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(fi.Name(), qt.Equals, "b.txt")
|
2019-07-30 12:34:41 -04:00
|
|
|
}
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
func TestRootMappingFsOs(t *testing.T) {
|
2019-08-10 15:05:17 -04:00
|
|
|
c := qt.New(t)
|
2020-01-31 11:15:14 -05:00
|
|
|
fs := NewBaseFileDecorator(afero.NewOsFs())
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
d, clean, err := htesting.CreateTempDir(fs, "hugo-root-mapping-os")
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
defer clean()
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
|
|
|
testfile := "myfile.txt"
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(fs.Mkdir(filepath.Join(d, "f1t"), 0755), qt.IsNil)
|
|
|
|
c.Assert(fs.Mkdir(filepath.Join(d, "f2t"), 0755), qt.IsNil)
|
|
|
|
c.Assert(fs.Mkdir(filepath.Join(d, "f3t"), 0755), qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
|
|
|
|
// Deep structure
|
|
|
|
deepDir := filepath.Join(d, "d1", "d2", "d3", "d4", "d5")
|
|
|
|
c.Assert(fs.MkdirAll(deepDir, 0755), qt.IsNil)
|
|
|
|
for i := 1; i <= 3; i++ {
|
|
|
|
c.Assert(fs.MkdirAll(filepath.Join(d, "d1", "d2", "d3", "d4", fmt.Sprintf("d4-%d", i)), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join(d, "d1", "d2", "d3", fmt.Sprintf("f-%d.txt", i)), []byte("some content"), 0755), qt.IsNil)
|
|
|
|
}
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join(d, "f2t", testfile), []byte("some content"), 0755), qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2020-02-09 11:58:55 -05:00
|
|
|
// https://github.com/gohugoio/hugo/issues/6854
|
|
|
|
mystaticDir := filepath.Join(d, "mystatic", "a", "b", "c")
|
|
|
|
c.Assert(fs.MkdirAll(mystaticDir, 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join(mystaticDir, "ms-1.txt"), []byte("some content"), 0755), qt.IsNil)
|
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
rfs, err := newRootMappingFsFromFromTo(
|
|
|
|
d,
|
|
|
|
fs,
|
|
|
|
"static/bf1", filepath.Join(d, "f1t"),
|
|
|
|
"static/cf2", filepath.Join(d, "f2t"),
|
|
|
|
"static/af3", filepath.Join(d, "f3t"),
|
2020-02-09 11:58:55 -05:00
|
|
|
"static", filepath.Join(d, "mystatic"),
|
2020-01-31 11:15:14 -05:00
|
|
|
"static/a/b/c", filepath.Join(d, "d1", "d2", "d3"),
|
|
|
|
"layouts", filepath.Join(d, "d1"),
|
|
|
|
)
|
|
|
|
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
fif, err := rfs.Stat(filepath.Join("static/cf2", testfile))
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
c.Assert(fif.Name(), qt.Equals, "myfile.txt")
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
root, err := rfs.Open("static")
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
|
|
|
dirnames, err := root.Readdirnames(-1)
|
2019-08-10 15:05:17 -04:00
|
|
|
c.Assert(err, qt.IsNil)
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(dirnames, qt.DeepEquals, []string{"a", "af3", "bf1", "cf2"}, qt.Commentf(fmt.Sprintf("%#v", dirnames)))
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2020-01-31 11:15:14 -05:00
|
|
|
getDirnames := func(dirname string) []string {
|
|
|
|
dirname = filepath.FromSlash(dirname)
|
|
|
|
f, err := rfs.Open(dirname)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
defer f.Close()
|
|
|
|
dirnames, err := f.Readdirnames(-1)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
sort.Strings(dirnames)
|
|
|
|
return dirnames
|
|
|
|
}
|
|
|
|
|
|
|
|
c.Assert(getDirnames("static/a/b"), qt.DeepEquals, []string{"c"})
|
2020-02-09 11:58:55 -05:00
|
|
|
c.Assert(getDirnames("static/a/b/c"), qt.DeepEquals, []string{"d4", "f-1.txt", "f-2.txt", "f-3.txt", "ms-1.txt"})
|
2020-01-31 11:15:14 -05:00
|
|
|
c.Assert(getDirnames("static/a/b/c/d4"), qt.DeepEquals, []string{"d4-1", "d4-2", "d4-3", "d5"})
|
|
|
|
|
|
|
|
all, err := collectFilenames(rfs, "static", "static")
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
|
2020-02-09 11:58:55 -05:00
|
|
|
c.Assert(all, qt.DeepEquals, []string{"a/b/c/f-1.txt", "a/b/c/f-2.txt", "a/b/c/f-3.txt", "a/b/c/ms-1.txt", "cf2/myfile.txt"})
|
2020-01-31 11:15:14 -05:00
|
|
|
|
|
|
|
fis, err := collectFileinfos(rfs, "static", "static")
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
|
|
|
|
c.Assert(fis[9].Meta().PathFile(), qt.Equals, filepath.FromSlash("d1/d2/d3/f-1.txt"))
|
|
|
|
|
|
|
|
dirc := fis[3].Meta()
|
|
|
|
|
|
|
|
f, err := dirc.Open()
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
defer f.Close()
|
|
|
|
fileInfos, err := f.Readdir(-1)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
sortFileInfos(fileInfos)
|
|
|
|
i := 0
|
|
|
|
for _, fi := range fileInfos {
|
2020-02-09 11:58:55 -05:00
|
|
|
if fi.IsDir() || fi.Name() == "ms-1.txt" {
|
2020-01-31 11:15:14 -05:00
|
|
|
continue
|
|
|
|
}
|
|
|
|
i++
|
|
|
|
meta := fi.(FileMetaInfo).Meta()
|
|
|
|
c.Assert(meta.Filename(), qt.Equals, filepath.Join(d, fmt.Sprintf("/d1/d2/d3/f-%d.txt", i)))
|
|
|
|
c.Assert(meta.PathFile(), qt.Equals, filepath.FromSlash(fmt.Sprintf("d1/d2/d3/f-%d.txt", i)))
|
|
|
|
}
|
|
|
|
|
|
|
|
_, err = rfs.Stat(filepath.FromSlash("layouts/d2/d3/f-1.txt"))
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
_, err = rfs.Stat(filepath.FromSlash("layouts/d2/d3"))
|
|
|
|
c.Assert(err, qt.IsNil)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
2020-02-09 11:58:55 -05:00
|
|
|
|
|
|
|
func TestRootMappingFsOsBase(t *testing.T) {
|
|
|
|
c := qt.New(t)
|
|
|
|
fs := NewBaseFileDecorator(afero.NewOsFs())
|
|
|
|
|
|
|
|
d, clean, err := htesting.CreateTempDir(fs, "hugo-root-mapping-os-base")
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
defer clean()
|
|
|
|
|
|
|
|
// Deep structure
|
|
|
|
deepDir := filepath.Join(d, "d1", "d2", "d3", "d4", "d5")
|
|
|
|
c.Assert(fs.MkdirAll(deepDir, 0755), qt.IsNil)
|
|
|
|
for i := 1; i <= 3; i++ {
|
|
|
|
c.Assert(fs.MkdirAll(filepath.Join(d, "d1", "d2", "d3", "d4", fmt.Sprintf("d4-%d", i)), 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join(d, "d1", "d2", "d3", fmt.Sprintf("f-%d.txt", i)), []byte("some content"), 0755), qt.IsNil)
|
|
|
|
}
|
|
|
|
|
|
|
|
mystaticDir := filepath.Join(d, "mystatic", "a", "b", "c")
|
|
|
|
c.Assert(fs.MkdirAll(mystaticDir, 0755), qt.IsNil)
|
|
|
|
c.Assert(afero.WriteFile(fs, filepath.Join(mystaticDir, "ms-1.txt"), []byte("some content"), 0755), qt.IsNil)
|
|
|
|
|
|
|
|
bfs := afero.NewBasePathFs(fs, d)
|
|
|
|
|
|
|
|
rfs, err := newRootMappingFsFromFromTo(
|
|
|
|
"",
|
|
|
|
bfs,
|
|
|
|
"static", "mystatic",
|
|
|
|
"static/a/b/c", filepath.Join("d1", "d2", "d3"),
|
|
|
|
)
|
|
|
|
|
|
|
|
getDirnames := func(dirname string) []string {
|
|
|
|
dirname = filepath.FromSlash(dirname)
|
|
|
|
f, err := rfs.Open(dirname)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
defer f.Close()
|
|
|
|
dirnames, err := f.Readdirnames(-1)
|
|
|
|
c.Assert(err, qt.IsNil)
|
|
|
|
sort.Strings(dirnames)
|
|
|
|
return dirnames
|
|
|
|
}
|
|
|
|
|
|
|
|
c.Assert(getDirnames("static/a/b/c"), qt.DeepEquals, []string{"d4", "f-1.txt", "f-2.txt", "f-3.txt", "ms-1.txt"})
|
|
|
|
}
|