2024-01-29 04:02:24 -05:00
|
|
|
// Copyright 2024 The Hugo Authors. All rights reserved.
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
package pagemeta
|
|
|
|
|
|
|
|
import (
|
|
|
|
"strings"
|
|
|
|
"time"
|
|
|
|
|
2021-07-28 12:02:42 -04:00
|
|
|
"github.com/gohugoio/hugo/common/htime"
|
2023-06-16 02:17:42 -04:00
|
|
|
"github.com/gohugoio/hugo/common/loggers"
|
2024-01-29 04:02:24 -05:00
|
|
|
"github.com/gohugoio/hugo/common/maps"
|
2021-06-18 04:27:27 -04:00
|
|
|
"github.com/gohugoio/hugo/common/paths"
|
2024-01-29 04:02:24 -05:00
|
|
|
"github.com/gohugoio/hugo/resources/page"
|
2021-06-18 04:27:27 -04:00
|
|
|
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
"github.com/gohugoio/hugo/helpers"
|
|
|
|
|
|
|
|
"github.com/gohugoio/hugo/config"
|
|
|
|
"github.com/spf13/cast"
|
|
|
|
)
|
|
|
|
|
2024-01-29 04:02:24 -05:00
|
|
|
type Dates struct {
|
|
|
|
Date time.Time
|
|
|
|
Lastmod time.Time
|
|
|
|
PublishDate time.Time
|
|
|
|
ExpiryDate time.Time
|
|
|
|
}
|
|
|
|
|
|
|
|
func (d Dates) IsDateOrLastModAfter(in Dates) bool {
|
|
|
|
return d.Date.After(in.Date) || d.Lastmod.After(in.Lastmod)
|
|
|
|
}
|
|
|
|
|
|
|
|
func (d *Dates) UpdateDateAndLastmodIfAfter(in Dates) {
|
|
|
|
if in.Date.After(d.Date) {
|
|
|
|
d.Date = in.Date
|
|
|
|
}
|
|
|
|
if in.Lastmod.After(d.Lastmod) {
|
|
|
|
d.Lastmod = in.Lastmod
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (d Dates) IsAllDatesZero() bool {
|
|
|
|
return d.Date.IsZero() && d.Lastmod.IsZero() && d.PublishDate.IsZero() && d.ExpiryDate.IsZero()
|
|
|
|
}
|
|
|
|
|
|
|
|
// PageConfig configures a Page, typically from front matter.
|
|
|
|
// Note that all the top level fields are reserved Hugo keywords.
|
|
|
|
// Any custom configuration needs to be set in the Params map.
|
|
|
|
type PageConfig struct {
|
2024-01-30 04:42:24 -05:00
|
|
|
Dates // Dates holds the four core dates for this page.
|
2024-01-29 04:02:24 -05:00
|
|
|
Title string // The title of the page.
|
|
|
|
LinkTitle string // The link title of the page.
|
|
|
|
Type string // The content type of the page.
|
|
|
|
Layout string // The layout to use for to render this page.
|
|
|
|
Markup string // The markup used in the content file.
|
|
|
|
Weight int // The weight of the page, used in sorting if set to a non-zero value.
|
|
|
|
Kind string // The kind of page, e.g. "page", "section", "home" etc. This is usually derived from the content path.
|
|
|
|
Path string // The canonical path to the page, e.g. /sect/mypage. Note: Leading slash, no trailing slash, no extensions or language identifiers.
|
2024-01-30 04:42:24 -05:00
|
|
|
URL string // The URL to the rendered page, e.g. /sect/mypage.html.
|
2024-01-29 04:02:24 -05:00
|
|
|
Lang string // The language code for this page. This is usually derived from the module mount or filename.
|
|
|
|
Slug string // The slug for this page.
|
|
|
|
Description string // The description for this page.
|
|
|
|
Summary string // The summary for this page.
|
|
|
|
Draft bool // Whether or not the content is a draft.
|
|
|
|
Headless bool // Whether or not the page should be rendered.
|
|
|
|
IsCJKLanguage bool // Whether or not the content is in a CJK language.
|
|
|
|
TranslationKey string // The translation key for this page.
|
|
|
|
Keywords []string // The keywords for this page.
|
|
|
|
Aliases []string // The aliases for this page.
|
|
|
|
Outputs []string // The output formats to render this page in. If not set, the site's configured output formats for this page kind will be used.
|
|
|
|
|
|
|
|
// These build options are set in the front matter,
|
|
|
|
// but not passed on to .Params.
|
|
|
|
Resources []map[string]any
|
|
|
|
Cascade map[page.PageMatcher]maps.Params // Only relevant for branch nodes.
|
|
|
|
Sitemap config.SitemapConfig
|
|
|
|
Build BuildConfig
|
|
|
|
|
|
|
|
// User defined params.
|
|
|
|
Params maps.Params
|
|
|
|
}
|
|
|
|
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
// FrontMatterHandler maps front matter into Page fields and .Params.
|
|
|
|
// Note that we currently have only extracted the date logic.
|
|
|
|
type FrontMatterHandler struct {
|
2023-01-04 12:24:36 -05:00
|
|
|
fmConfig FrontmatterConfig
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
|
|
|
|
dateHandler frontMatterFieldHandler
|
|
|
|
lastModHandler frontMatterFieldHandler
|
|
|
|
publishDateHandler frontMatterFieldHandler
|
|
|
|
expiryDateHandler frontMatterFieldHandler
|
|
|
|
|
|
|
|
// A map of all date keys configured, including any custom.
|
|
|
|
allDateKeys map[string]bool
|
|
|
|
|
2020-10-21 05:17:48 -04:00
|
|
|
logger loggers.Logger
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
// FrontMatterDescriptor describes how to handle front matter for a given Page.
|
|
|
|
// It has pointers to values in the receiving page which gets updated.
|
|
|
|
type FrontMatterDescriptor struct {
|
2018-10-16 17:51:48 -04:00
|
|
|
// This is the Page's base filename (BaseFilename), e.g. page.md., or
|
|
|
|
// if page is a leaf bundle, the bundle folder name (ContentBaseName).
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
BaseFilename string
|
|
|
|
|
|
|
|
// The content file's mod time.
|
|
|
|
ModTime time.Time
|
|
|
|
|
2018-03-11 13:59:11 -04:00
|
|
|
// May be set from the author date in Git.
|
|
|
|
GitAuthorDate time.Time
|
|
|
|
|
2024-01-29 04:02:24 -05:00
|
|
|
// The below will be modified.
|
|
|
|
PageConfig *PageConfig
|
2021-07-27 07:45:05 -04:00
|
|
|
|
|
|
|
// The Location to use to parse dates without time zone info.
|
|
|
|
Location *time.Location
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
2020-12-02 07:23:25 -05:00
|
|
|
var dateFieldAliases = map[string][]string{
|
|
|
|
fmDate: {},
|
|
|
|
fmLastmod: {"modified"},
|
|
|
|
fmPubDate: {"pubdate", "published"},
|
|
|
|
fmExpiryDate: {"unpublishdate"},
|
|
|
|
}
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
|
|
|
|
// HandleDates updates all the dates given the current configuration and the
|
|
|
|
// supplied front matter params. Note that this requires all lower-case keys
|
|
|
|
// in the params map.
|
|
|
|
func (f FrontMatterHandler) HandleDates(d *FrontMatterDescriptor) error {
|
2024-01-29 04:02:24 -05:00
|
|
|
if d.PageConfig == nil {
|
|
|
|
panic("missing pageConfig")
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
if f.dateHandler == nil {
|
|
|
|
panic("missing date handler")
|
|
|
|
}
|
|
|
|
|
|
|
|
if _, err := f.dateHandler(d); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if _, err := f.lastModHandler(d); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if _, err := f.publishDateHandler(d); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
if _, err := f.expiryDateHandler(d); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
|
|
|
// IsDateKey returns whether the given front matter key is considered a date by the current
|
|
|
|
// configuration.
|
|
|
|
func (f FrontMatterHandler) IsDateKey(key string) bool {
|
|
|
|
return f.allDateKeys[key]
|
|
|
|
}
|
|
|
|
|
|
|
|
// A Zero date is a signal that the name can not be parsed.
|
|
|
|
// This follows the format as outlined in Jekyll, https://jekyllrb.com/docs/posts/:
|
|
|
|
// "Where YEAR is a four-digit number, MONTH and DAY are both two-digit numbers"
|
2021-07-27 07:45:05 -04:00
|
|
|
func dateAndSlugFromBaseFilename(location *time.Location, name string) (time.Time, string) {
|
2021-06-18 04:27:27 -04:00
|
|
|
withoutExt, _ := paths.FileAndExt(name)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
|
|
|
|
if len(withoutExt) < 10 {
|
|
|
|
// This can not be a date.
|
|
|
|
return time.Time{}, ""
|
|
|
|
}
|
|
|
|
|
2021-07-28 12:02:42 -04:00
|
|
|
d, err := htime.ToTimeInDefaultLocationE(withoutExt[:10], location)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
if err != nil {
|
|
|
|
return time.Time{}, ""
|
|
|
|
}
|
|
|
|
|
|
|
|
// Be a little lenient with the format here.
|
|
|
|
slug := strings.Trim(withoutExt[10:], " -_")
|
|
|
|
|
|
|
|
return d, slug
|
|
|
|
}
|
|
|
|
|
|
|
|
type frontMatterFieldHandler func(d *FrontMatterDescriptor) (bool, error)
|
|
|
|
|
|
|
|
func (f FrontMatterHandler) newChainedFrontMatterFieldHandler(handlers ...frontMatterFieldHandler) frontMatterFieldHandler {
|
|
|
|
return func(d *FrontMatterDescriptor) (bool, error) {
|
|
|
|
for _, h := range handlers {
|
|
|
|
// First successful handler wins.
|
|
|
|
success, err := h(d)
|
|
|
|
if err != nil {
|
2020-10-21 05:17:48 -04:00
|
|
|
f.logger.Errorln(err)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
} else if success {
|
|
|
|
return true, nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return false, nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
type FrontmatterConfig struct {
|
|
|
|
// Controls how the Date is set from front matter.
|
|
|
|
Date []string
|
|
|
|
// Controls how the Lastmod is set from front matter.
|
|
|
|
Lastmod []string
|
|
|
|
// Controls how the PublishDate is set from front matter.
|
|
|
|
PublishDate []string
|
|
|
|
// Controls how the ExpiryDate is set from front matter.
|
|
|
|
ExpiryDate []string
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
const (
|
|
|
|
// These are all the date handler identifiers
|
|
|
|
// All identifiers not starting with a ":" maps to a front matter parameter.
|
|
|
|
fmDate = "date"
|
|
|
|
fmPubDate = "publishdate"
|
|
|
|
fmLastmod = "lastmod"
|
|
|
|
fmExpiryDate = "expirydate"
|
|
|
|
|
|
|
|
// Gets date from filename, e.g 218-02-22-mypage.md
|
|
|
|
fmFilename = ":filename"
|
|
|
|
|
|
|
|
// Gets date from file OS mod time.
|
|
|
|
fmModTime = ":filemodtime"
|
2018-03-11 13:59:11 -04:00
|
|
|
|
|
|
|
// Gets date from Git
|
|
|
|
fmGitAuthorDate = ":git"
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
)
|
|
|
|
|
|
|
|
// This is the config you get when doing nothing.
|
2023-01-04 12:24:36 -05:00
|
|
|
func newDefaultFrontmatterConfig() FrontmatterConfig {
|
|
|
|
return FrontmatterConfig{
|
|
|
|
Date: []string{fmDate, fmPubDate, fmLastmod},
|
|
|
|
Lastmod: []string{fmGitAuthorDate, fmLastmod, fmDate, fmPubDate},
|
|
|
|
PublishDate: []string{fmPubDate, fmDate},
|
|
|
|
ExpiryDate: []string{fmExpiryDate},
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
func DecodeFrontMatterConfig(cfg config.Provider) (FrontmatterConfig, error) {
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
c := newDefaultFrontmatterConfig()
|
|
|
|
defaultConfig := c
|
|
|
|
|
|
|
|
if cfg.IsSet("frontmatter") {
|
|
|
|
fm := cfg.GetStringMap("frontmatter")
|
2018-08-28 16:51:44 -04:00
|
|
|
for k, v := range fm {
|
|
|
|
loki := strings.ToLower(k)
|
|
|
|
switch loki {
|
|
|
|
case fmDate:
|
2023-01-04 12:24:36 -05:00
|
|
|
c.Date = toLowerSlice(v)
|
2018-08-28 16:51:44 -04:00
|
|
|
case fmPubDate:
|
2023-01-04 12:24:36 -05:00
|
|
|
c.PublishDate = toLowerSlice(v)
|
2018-08-28 16:51:44 -04:00
|
|
|
case fmLastmod:
|
2023-01-04 12:24:36 -05:00
|
|
|
c.Lastmod = toLowerSlice(v)
|
2018-08-28 16:51:44 -04:00
|
|
|
case fmExpiryDate:
|
2023-01-04 12:24:36 -05:00
|
|
|
c.ExpiryDate = toLowerSlice(v)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
expander := func(c, d []string) []string {
|
|
|
|
out := expandDefaultValues(c, d)
|
|
|
|
out = addDateFieldAliases(out)
|
|
|
|
return out
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
c.Date = expander(c.Date, defaultConfig.Date)
|
|
|
|
c.PublishDate = expander(c.PublishDate, defaultConfig.PublishDate)
|
|
|
|
c.Lastmod = expander(c.Lastmod, defaultConfig.Lastmod)
|
|
|
|
c.ExpiryDate = expander(c.ExpiryDate, defaultConfig.ExpiryDate)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
|
|
|
|
return c, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func addDateFieldAliases(values []string) []string {
|
|
|
|
var complete []string
|
|
|
|
|
|
|
|
for _, v := range values {
|
|
|
|
complete = append(complete, v)
|
|
|
|
if aliases, found := dateFieldAliases[v]; found {
|
|
|
|
complete = append(complete, aliases...)
|
|
|
|
}
|
|
|
|
}
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
return helpers.UniqueStringsReuse(complete)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
func expandDefaultValues(values []string, defaults []string) []string {
|
|
|
|
var out []string
|
|
|
|
for _, v := range values {
|
|
|
|
if v == ":default" {
|
|
|
|
out = append(out, defaults...)
|
|
|
|
} else {
|
|
|
|
out = append(out, v)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
return out
|
|
|
|
}
|
|
|
|
|
2022-03-17 17:03:27 -04:00
|
|
|
func toLowerSlice(in any) []string {
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
out := cast.ToStringSlice(in)
|
|
|
|
for i := 0; i < len(out); i++ {
|
|
|
|
out[i] = strings.ToLower(out[i])
|
|
|
|
}
|
|
|
|
|
|
|
|
return out
|
|
|
|
}
|
|
|
|
|
|
|
|
// NewFrontmatterHandler creates a new FrontMatterHandler with the given logger and configuration.
|
|
|
|
// If no logger is provided, one will be created.
|
2023-01-04 12:24:36 -05:00
|
|
|
func NewFrontmatterHandler(logger loggers.Logger, frontMatterConfig FrontmatterConfig) (FrontMatterHandler, error) {
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
if logger == nil {
|
2023-06-16 02:17:42 -04:00
|
|
|
logger = loggers.NewDefault()
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
allDateKeys := make(map[string]bool)
|
|
|
|
addKeys := func(vals []string) {
|
|
|
|
for _, k := range vals {
|
|
|
|
if !strings.HasPrefix(k, ":") {
|
|
|
|
allDateKeys[k] = true
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
addKeys(frontMatterConfig.Date)
|
|
|
|
addKeys(frontMatterConfig.ExpiryDate)
|
|
|
|
addKeys(frontMatterConfig.Lastmod)
|
|
|
|
addKeys(frontMatterConfig.PublishDate)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
|
|
|
|
f := FrontMatterHandler{logger: logger, fmConfig: frontMatterConfig, allDateKeys: allDateKeys}
|
|
|
|
|
|
|
|
if err := f.createHandlers(); err != nil {
|
|
|
|
return f, err
|
|
|
|
}
|
|
|
|
|
|
|
|
return f, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
func (f *FrontMatterHandler) createHandlers() error {
|
|
|
|
var err error
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
if f.dateHandler, err = f.createDateHandler(f.fmConfig.Date,
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
func(d *FrontMatterDescriptor, t time.Time) {
|
2024-01-29 04:02:24 -05:00
|
|
|
d.PageConfig.Date = t
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
setParamIfNotSet(fmDate, t, d)
|
|
|
|
}); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
if f.lastModHandler, err = f.createDateHandler(f.fmConfig.Lastmod,
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
func(d *FrontMatterDescriptor, t time.Time) {
|
|
|
|
setParamIfNotSet(fmLastmod, t, d)
|
2024-01-29 04:02:24 -05:00
|
|
|
d.PageConfig.Lastmod = t
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
if f.publishDateHandler, err = f.createDateHandler(f.fmConfig.PublishDate,
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
func(d *FrontMatterDescriptor, t time.Time) {
|
|
|
|
setParamIfNotSet(fmPubDate, t, d)
|
2024-01-29 04:02:24 -05:00
|
|
|
d.PageConfig.PublishDate = t
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
if f.expiryDateHandler, err = f.createDateHandler(f.fmConfig.ExpiryDate,
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
func(d *FrontMatterDescriptor, t time.Time) {
|
|
|
|
setParamIfNotSet(fmExpiryDate, t, d)
|
2024-01-29 04:02:24 -05:00
|
|
|
d.PageConfig.ExpiryDate = t
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}); err != nil {
|
|
|
|
return err
|
|
|
|
}
|
|
|
|
|
|
|
|
return nil
|
|
|
|
}
|
|
|
|
|
2022-03-17 17:03:27 -04:00
|
|
|
func setParamIfNotSet(key string, value any, d *FrontMatterDescriptor) {
|
2024-01-29 04:02:24 -05:00
|
|
|
if _, found := d.PageConfig.Params[key]; found {
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
return
|
|
|
|
}
|
2024-01-29 04:02:24 -05:00
|
|
|
d.PageConfig.Params[key] = value
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
func (f FrontMatterHandler) createDateHandler(identifiers []string, setter func(d *FrontMatterDescriptor, t time.Time)) (frontMatterFieldHandler, error) {
|
|
|
|
var h *frontmatterFieldHandlers
|
|
|
|
var handlers []frontMatterFieldHandler
|
|
|
|
|
|
|
|
for _, identifier := range identifiers {
|
|
|
|
switch identifier {
|
|
|
|
case fmFilename:
|
|
|
|
handlers = append(handlers, h.newDateFilenameHandler(setter))
|
|
|
|
case fmModTime:
|
|
|
|
handlers = append(handlers, h.newDateModTimeHandler(setter))
|
2018-03-11 13:59:11 -04:00
|
|
|
case fmGitAuthorDate:
|
|
|
|
handlers = append(handlers, h.newDateGitAuthorDateHandler(setter))
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
default:
|
|
|
|
handlers = append(handlers, h.newDateFieldHandler(identifier, setter))
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
return f.newChainedFrontMatterFieldHandler(handlers...), nil
|
|
|
|
}
|
|
|
|
|
|
|
|
type frontmatterFieldHandlers int
|
|
|
|
|
|
|
|
func (f *frontmatterFieldHandlers) newDateFieldHandler(key string, setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
|
|
|
|
return func(d *FrontMatterDescriptor) (bool, error) {
|
2024-01-29 04:02:24 -05:00
|
|
|
v, found := d.PageConfig.Params[key]
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
|
|
|
|
if !found {
|
|
|
|
return false, nil
|
|
|
|
}
|
|
|
|
|
2024-03-13 10:32:33 -04:00
|
|
|
var date time.Time
|
|
|
|
if vt, ok := v.(time.Time); ok && vt.Location() == d.Location {
|
|
|
|
date = vt
|
|
|
|
} else {
|
|
|
|
var err error
|
|
|
|
date, err = htime.ToTimeInDefaultLocationE(v, d.Location)
|
|
|
|
if err != nil {
|
|
|
|
return false, nil
|
|
|
|
}
|
|
|
|
d.PageConfig.Params[key] = date
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
// We map several date keys to one, so, for example,
|
|
|
|
// "expirydate", "unpublishdate" will all set .ExpiryDate (first found).
|
|
|
|
setter(d, date)
|
|
|
|
|
|
|
|
return true, nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (f *frontmatterFieldHandlers) newDateFilenameHandler(setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
|
|
|
|
return func(d *FrontMatterDescriptor) (bool, error) {
|
2021-07-27 07:45:05 -04:00
|
|
|
date, slug := dateAndSlugFromBaseFilename(d.Location, d.BaseFilename)
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
if date.IsZero() {
|
|
|
|
return false, nil
|
|
|
|
}
|
|
|
|
|
|
|
|
setter(d, date)
|
|
|
|
|
2024-01-29 04:02:24 -05:00
|
|
|
if _, found := d.PageConfig.Params["slug"]; !found {
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
// Use slug from filename
|
2024-01-29 04:02:24 -05:00
|
|
|
d.PageConfig.Slug = slug
|
hugolib: Extract date and slug from filename
This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter.
This should make it easier to move content from Jekyll to Hugo.
To enable, put this in your `config.toml`:
```toml
[frontmatter]
date = [":filename", ":default"]
```
This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc.
So, if you want to use the `file modification time`, this can be a good configuration:
```toml
[frontmatter]
date = [ "date",":fileModTime", ":default"]
lastmod = ["lastmod" ,":fileModTime", ":default"]
```
The current `:default` values for the different dates are
```toml
[frontmatter]
date = ["date","publishDate", "lastmod"]
lastmod = ["lastmod", "date","publishDate"]
publishDate = ["publishDate", "date"]
expiryDate = ["expiryDate"]
```
The above will now be the same as:
```toml
[frontmatter]
date = [":default"]
lastmod = [":default"]
publishDate = [":default"]
expiryDate = [":default"]
```
Note:
* We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate.
* If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved.
* All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`).
* The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values.
* The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list.
Fixes #285
Closes #3310
Closes #3762
Closes #4340
2018-03-11 06:32:55 -04:00
|
|
|
}
|
|
|
|
|
|
|
|
return true, nil
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
func (f *frontmatterFieldHandlers) newDateModTimeHandler(setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
|
|
|
|
return func(d *FrontMatterDescriptor) (bool, error) {
|
|
|
|
if d.ModTime.IsZero() {
|
|
|
|
return false, nil
|
|
|
|
}
|
|
|
|
setter(d, d.ModTime)
|
|
|
|
return true, nil
|
|
|
|
}
|
|
|
|
}
|
2018-03-11 13:59:11 -04:00
|
|
|
|
|
|
|
func (f *frontmatterFieldHandlers) newDateGitAuthorDateHandler(setter func(d *FrontMatterDescriptor, t time.Time)) frontMatterFieldHandler {
|
|
|
|
return func(d *FrontMatterDescriptor) (bool, error) {
|
|
|
|
if d.GitAuthorDate.IsZero() {
|
|
|
|
return false, nil
|
|
|
|
}
|
|
|
|
setter(d, d.GitAuthorDate)
|
|
|
|
return true, nil
|
|
|
|
}
|
|
|
|
}
|