hugo/tpl/template_info.go

84 lines
1.7 KiB
Go
Raw Normal View History

// Copyright 2019 The Hugo Authors. All rights reserved.
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package tpl
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
import (
"github.com/gohugoio/hugo/identity"
)
// Increments on breaking changes.
const TemplateVersion = 2
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
type Info interface {
ParseInfo() ParseInfo
// Identifies this template and its dependencies.
identity.Provider
}
2022-02-15 14:26:18 +00:00
type FileInfo interface {
Name() string
Filename() string
}
type InfoManager interface {
ParseInfo() ParseInfo
// Identifies and manages this template and its dependencies.
identity.Manager
}
type defaultInfo struct {
identity.Manager
parseInfo ParseInfo
}
func NewInfo(id identity.Manager, parseInfo ParseInfo) Info {
return &defaultInfo{
Manager: id,
parseInfo: parseInfo,
}
}
func (info *defaultInfo) ParseInfo() ParseInfo {
return info.parseInfo
}
type ParseInfo struct {
// Set for shortcode templates with any {{ .Inner }}
IsInner bool
// Set for partials with a return statement.
HasReturn bool
// Config extracted from template.
Config ParseConfig
}
func (info ParseInfo) IsZero() bool {
return info.Config.Version == 0
}
type ParseConfig struct {
Version int
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
var DefaultParseConfig = ParseConfig{
Version: TemplateVersion,
hugolib: Extract date and slug from filename This commit makes it possible to extract the date from the content filename. Also, the filenames in these cases will make for very poor permalinks, so we will also use the remaining part as the page `slug` if that value is not set in front matter. This should make it easier to move content from Jekyll to Hugo. To enable, put this in your `config.toml`: ```toml [frontmatter] date = [":filename", ":default"] ``` This commit is also a spring cleaning of how the different dates are configured in Hugo. Hugo will check for dates following the configuration from left to right, starting with `:filename` etc. So, if you want to use the `file modification time`, this can be a good configuration: ```toml [frontmatter] date = [ "date",":fileModTime", ":default"] lastmod = ["lastmod" ,":fileModTime", ":default"] ``` The current `:default` values for the different dates are ```toml [frontmatter] date = ["date","publishDate", "lastmod"] lastmod = ["lastmod", "date","publishDate"] publishDate = ["publishDate", "date"] expiryDate = ["expiryDate"] ``` The above will now be the same as: ```toml [frontmatter] date = [":default"] lastmod = [":default"] publishDate = [":default"] expiryDate = [":default"] ``` Note: * We have some built-in aliases to the above: lastmod => modified, publishDate => pubdate, published and expiryDate => unpublishdate. * If you want a new configuration for, say, `date`, you can provide only that line, and the rest will be preserved. * All the keywords to the right that does not start with a ":" maps to front matter parameters, and can be any date param (e.g. `myCustomDateParam`). * The keywords to the left are the **4 predefined dates in Hugo**, i.e. they are constant values. * The current "special date handlers" are `:fileModTime` and `:filename`. We will soon add `:git` to that list. Fixes #285 Closes #3310 Closes #3762 Closes #4340
2018-03-11 10:32:55 +00:00
}
var DefaultParseInfo = ParseInfo{
Config: DefaultParseConfig,
}