Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
// Copyright 2018 The Hugo Authors. All rights reserved.
|
|
|
|
//
|
|
|
|
// Licensed under the Apache License, Version 2.0 (the "License");
|
|
|
|
// you may not use this file except in compliance with the License.
|
|
|
|
// You may obtain a copy of the License at
|
|
|
|
// http://www.apache.org/licenses/LICENSE-2.0
|
|
|
|
//
|
|
|
|
// Unless required by applicable law or agreed to in writing, software
|
|
|
|
// distributed under the License is distributed on an "AS IS" BASIS,
|
|
|
|
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
|
|
// See the License for the specific language governing permissions and
|
|
|
|
// limitations under the License.
|
|
|
|
|
|
|
|
package paths
|
|
|
|
|
|
|
|
import (
|
|
|
|
"path/filepath"
|
|
|
|
"strings"
|
|
|
|
|
2022-03-21 04:35:15 -04:00
|
|
|
hpaths "github.com/gohugoio/hugo/common/paths"
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
"github.com/gohugoio/hugo/config"
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
"github.com/gohugoio/hugo/modules"
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
|
|
|
"github.com/gohugoio/hugo/hugofs"
|
|
|
|
)
|
|
|
|
|
|
|
|
var FilePathSeparator = string(filepath.Separator)
|
|
|
|
|
|
|
|
type Paths struct {
|
|
|
|
Fs *hugofs.Fs
|
2023-01-04 12:24:36 -05:00
|
|
|
Cfg config.AllProvider
|
Add Hugo Piper with SCSS support and much more
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes #4381
Fixes #4903
Fixes #4858
2018-02-20 04:02:14 -05:00
|
|
|
|
|
|
|
// Directories to store Resource related artifacts.
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
AbsResourcesDir string
|
Add Hugo Piper with SCSS support and much more
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes #4381
Fixes #4903
Fixes #4858
2018-02-20 04:02:14 -05:00
|
|
|
|
|
|
|
AbsPublishDir string
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
|
2018-08-13 05:01:57 -04:00
|
|
|
// When in multihost mode, this returns a list of base paths below PublishDir
|
|
|
|
// for each language.
|
|
|
|
MultihostTargetBasePaths []string
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
func New(fs *hugofs.Fs, cfg config.AllProvider) (*Paths, error) {
|
|
|
|
bcfg := cfg.BaseConfig()
|
|
|
|
publishDir := bcfg.PublishDir
|
Add Hugo Piper with SCSS support and much more
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes #4381
Fixes #4903
Fixes #4858
2018-02-20 04:02:14 -05:00
|
|
|
if publishDir == "" {
|
2023-01-04 12:24:36 -05:00
|
|
|
panic("publishDir not set")
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
absPublishDir := hpaths.AbsPathify(bcfg.WorkingDir, publishDir)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
if !strings.HasSuffix(absPublishDir, FilePathSeparator) {
|
|
|
|
absPublishDir += FilePathSeparator
|
|
|
|
}
|
|
|
|
// If root, remove the second '/'
|
|
|
|
if absPublishDir == "//" {
|
|
|
|
absPublishDir = FilePathSeparator
|
|
|
|
}
|
2023-01-04 12:24:36 -05:00
|
|
|
absResourcesDir := hpaths.AbsPathify(bcfg.WorkingDir, cfg.Dirs().ResourceDir)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
if !strings.HasSuffix(absResourcesDir, FilePathSeparator) {
|
|
|
|
absResourcesDir += FilePathSeparator
|
|
|
|
}
|
|
|
|
if absResourcesDir == "//" {
|
|
|
|
absResourcesDir = FilePathSeparator
|
|
|
|
}
|
|
|
|
|
2018-08-13 05:01:57 -04:00
|
|
|
var multihostTargetBasePaths []string
|
2023-01-04 12:24:36 -05:00
|
|
|
if cfg.IsMultihost() && len(cfg.Languages()) > 1 {
|
|
|
|
for _, l := range cfg.Languages() {
|
2018-08-13 05:01:57 -04:00
|
|
|
multihostTargetBasePaths = append(multihostTargetBasePaths, l.Lang)
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
p := &Paths{
|
2023-01-04 12:24:36 -05:00
|
|
|
Fs: fs,
|
|
|
|
Cfg: cfg,
|
|
|
|
AbsResourcesDir: absResourcesDir,
|
|
|
|
AbsPublishDir: absPublishDir,
|
2018-08-13 05:01:57 -04:00
|
|
|
MultihostTargetBasePaths: multihostTargetBasePaths,
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
return p, nil
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
func (p *Paths) AllModules() modules.Modules {
|
|
|
|
return p.Cfg.GetConfigSection("activeModules").(modules.Modules)
|
|
|
|
}
|
|
|
|
|
2018-11-15 07:35:28 -05:00
|
|
|
// GetBasePath returns any path element in baseURL if needed.
|
|
|
|
func (p *Paths) GetBasePath(isRelativeURL bool) string {
|
2023-01-04 12:24:36 -05:00
|
|
|
if isRelativeURL && p.Cfg.CanonifyURLs() {
|
2018-11-15 07:35:28 -05:00
|
|
|
// The baseURL will be prepended later.
|
|
|
|
return ""
|
|
|
|
}
|
2023-01-04 12:24:36 -05:00
|
|
|
return p.Cfg.BaseURL().BasePath
|
2018-11-15 07:35:28 -05:00
|
|
|
}
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
func (p *Paths) Lang() string {
|
2023-01-04 12:24:36 -05:00
|
|
|
if p == nil || p.Cfg.Language() == nil {
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
return ""
|
|
|
|
}
|
2023-01-04 12:24:36 -05:00
|
|
|
return p.Cfg.Language().Lang
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Piper with SCSS support and much more
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes #4381
Fixes #4903
Fixes #4858
2018-02-20 04:02:14 -05:00
|
|
|
func (p *Paths) GetTargetLanguageBasePath() string {
|
2023-07-08 05:55:52 -04:00
|
|
|
if p.Cfg.IsMultihost() {
|
Add Hugo Piper with SCSS support and much more
Before this commit, you would have to use page bundles to do image processing etc. in Hugo.
This commit adds
* A new `/assets` top-level project or theme dir (configurable via `assetDir`)
* A new template func, `resources.Get` which can be used to "get a resource" that can be further processed.
This means that you can now do this in your templates (or shortcodes):
```bash
{{ $sunset := (resources.Get "images/sunset.jpg").Fill "300x200" }}
```
This also adds a new `extended` build tag that enables powerful SCSS/SASS support with source maps. To compile this from source, you will also need a C compiler installed:
```
HUGO_BUILD_TAGS=extended mage install
```
Note that you can use output of the SCSS processing later in a non-SCSSS-enabled Hugo.
The `SCSS` processor is a _Resource transformation step_ and it can be chained with the many others in a pipeline:
```bash
{{ $css := resources.Get "styles.scss" | resources.ToCSS | resources.PostCSS | resources.Minify | resources.Fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
The transformation funcs above have aliases, so it can be shortened to:
```bash
{{ $css := resources.Get "styles.scss" | toCSS | postCSS | minify | fingerprint }}
<link rel="stylesheet" href="{{ $styles.RelPermalink }}" integrity="{{ $styles.Data.Digest }}" media="screen">
```
A quick tip would be to avoid the fingerprinting part, and possibly also the not-superfast `postCSS` when you're doing development, as it allows Hugo to be smarter about the rebuilding.
Documentation will follow, but have a look at the demo repo in https://github.com/bep/hugo-sass-test
New functions to create `Resource` objects:
* `resources.Get` (see above)
* `resources.FromString`: Create a Resource from a string.
New `Resource` transformation funcs:
* `resources.ToCSS`: Compile `SCSS` or `SASS` into `CSS`.
* `resources.PostCSS`: Process your CSS with PostCSS. Config file support (project or theme or passed as an option).
* `resources.Minify`: Currently supports `css`, `js`, `json`, `html`, `svg`, `xml`.
* `resources.Fingerprint`: Creates a fingerprinted version of the given Resource with Subresource Integrity..
* `resources.Concat`: Concatenates a list of Resource objects. Think of this as a poor man's bundler.
* `resources.ExecuteAsTemplate`: Parses and executes the given Resource and data context (e.g. .Site) as a Go template.
Fixes #4381
Fixes #4903
Fixes #4858
2018-02-20 04:02:14 -05:00
|
|
|
// In a multihost configuration all assets will be published below the language code.
|
|
|
|
return p.Lang()
|
|
|
|
}
|
|
|
|
return p.GetLanguagePrefix()
|
|
|
|
}
|
|
|
|
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
func (p *Paths) GetLanguagePrefix() string {
|
2023-07-07 12:41:10 -04:00
|
|
|
return p.Cfg.LanguagePrefix()
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
|
|
|
// AbsPathify creates an absolute path if given a relative path. If already
|
|
|
|
// absolute, the path is just cleaned.
|
|
|
|
func (p *Paths) AbsPathify(inPath string) string {
|
2023-01-04 12:24:36 -05:00
|
|
|
return hpaths.AbsPathify(p.Cfg.BaseConfig().WorkingDir, inPath)
|
Add support for theme composition and inheritance
This commit adds support for theme composition and inheritance in Hugo.
With this, it helps thinking about a theme as a set of ordered components:
```toml
theme = ["my-shortcodes", "base-theme", "hyde"]
```
The theme definition example above in `config.toml` creates a theme with the 3 components with presedence from left to right.
So, Hugo will, for any given file, data entry etc., look first in the project, and then in `my-shortcode`, `base-theme` and lastly `hyde`.
Hugo uses two different algorithms to merge the filesystems, depending on the file type:
* For `i18n` and `data` files, Hugo merges deeply using the translation id and data key inside the files.
* For `static`, `layouts` (templates) and `archetypes` files, these are merged on file level. So the left-most file will be chosen.
The name used in the `theme` definition above must match a folder in `/your-site/themes`, e.g. `/your-site/themes/my-shortcodes`. There are plans to improve on this and get a URL scheme so this can be resolved automatically.
Also note that a component that is part of a theme can have its own configuration file, e.g. `config.toml`. There are currently some restrictions to what a theme component can configure:
* `params` (global and per language)
* `menu` (global and per language)
* `outputformats` and `mediatypes`
The same rules apply here: The left-most param/menu etc. with the same ID will win. There are some hidden and experimental namespace support in the above, which we will work to improve in the future, but theme authors are encouraged to create their own namespaces to avoid naming conflicts.
A final note: Themes/components can also have a `theme` definition in their `config.toml` and similar, which is the "inheritance" part of this commit's title. This is currently not supported by the Hugo theme site. We will have to wait for some "auto dependency" feature to be implemented for that to happen, but this can be a powerful feature if you want to create your own theme-variant based on others.
Fixes #4460
Fixes #4450
2018-03-01 09:01:25 -05:00
|
|
|
}
|
|
|
|
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
// RelPathify trims any WorkingDir prefix from the given filename. If
|
|
|
|
// the filename is not considered to be absolute, the path is just cleaned.
|
|
|
|
func (p *Paths) RelPathify(filename string) string {
|
|
|
|
filename = filepath.Clean(filename)
|
|
|
|
if !filepath.IsAbs(filename) {
|
|
|
|
return filename
|
|
|
|
}
|
|
|
|
|
2023-01-04 12:24:36 -05:00
|
|
|
return strings.TrimPrefix(strings.TrimPrefix(filename, p.Cfg.BaseConfig().WorkingDir), FilePathSeparator)
|
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 03:16:58 -04:00
|
|
|
}
|