Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
// Copyright 2019 The Hugo Authors. All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
package modules
import (
"bufio"
2023-12-18 16:41:15 +00:00
"errors"
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
"fmt"
all: Rework page store, add a dynacache, improve partial rebuilds, and some general spring cleaning
There are some breaking changes in this commit, see #11455.
Closes #11455
Closes #11549
This fixes a set of bugs (see issue list) and it is also paying some technical debt accumulated over the years. We now build with Staticcheck enabled in the CI build.
The performance should be about the same as before for regular sized Hugo sites, but it should perform and scale much better to larger data sets, as objects that uses lots of memory (e.g. rendered Markdown, big JSON files read into maps with transform.Unmarshal etc.) will now get automatically garbage collected if needed. Performance on partial rebuilds when running the server in fast render mode should be the same, but the change detection should be much more accurate.
A list of the notable new features:
* A new dependency tracker that covers (almost) all of Hugo's API and is used to do fine grained partial rebuilds when running the server.
* A new and simpler tree document store which allows fast lookups and prefix-walking in all dimensions (e.g. language) concurrently.
* You can now configure an upper memory limit allowing for much larger data sets and/or running on lower specced PCs.
We have lifted the "no resources in sub folders" restriction for branch bundles (e.g. sections).
Memory Limit
* Hugos will, by default, set aside a quarter of the total system memory, but you can set this via the OS environment variable HUGO_MEMORYLIMIT (in gigabytes). This is backed by a partitioned LRU cache used throughout Hugo. A cache that gets dynamically resized in low memory situations, allowing Go's Garbage Collector to free the memory.
New Dependency Tracker: Hugo has had a rule based coarse grained approach to server rebuilds that has worked mostly pretty well, but there have been some surprises (e.g. stale content). This is now revamped with a new dependency tracker that can quickly calculate the delta given a changed resource (e.g. a content file, template, JS file etc.). This handles transitive relations, e.g. $page -> js.Build -> JS import, or $page1.Content -> render hook -> site.GetPage -> $page2.Title, or $page1.Content -> shortcode -> partial -> site.RegularPages -> $page2.Content -> shortcode ..., and should also handle changes to aggregated values (e.g. site.Lastmod) effectively.
This covers all of Hugo's API with 2 known exceptions (a list that may not be fully exhaustive):
Changes to files loaded with template func os.ReadFile may not be handled correctly. We recommend loading resources with resources.Get
Changes to Hugo objects (e.g. Page) passed in the template context to lang.Translate may not be detected correctly. We recommend having simple i18n templates without too much data context passed in other than simple types such as strings and numbers.
Note that the cachebuster configuration (when A changes then rebuild B) works well with the above, but we recommend that you revise that configuration, as it in most situations should not be needed. One example where it is still needed is with TailwindCSS and using changes to hugo_stats.json to trigger new CSS rebuilds.
Document Store: Previously, a little simplified, we split the document store (where we store pages and resources) in a tree per language. This worked pretty well, but the structure made some operations harder than they needed to be. We have now restructured it into one Radix tree for all languages. Internally the language is considered to be a dimension of that tree, and the tree can be viewed in all dimensions concurrently. This makes some operations re. language simpler (e.g. finding translations is just a slice range), but the idea is that it should also be relatively inexpensive to add more dimensions if needed (e.g. role).
Fixes #10169
Fixes #10364
Fixes #10482
Fixes #10630
Fixes #10656
Fixes #10694
Fixes #10918
Fixes #11262
Fixes #11439
Fixes #11453
Fixes #11457
Fixes #11466
Fixes #11540
Fixes #11551
Fixes #11556
Fixes #11654
Fixes #11661
Fixes #11663
Fixes #11664
Fixes #11669
Fixes #11671
Fixes #11807
Fixes #11808
Fixes #11809
Fixes #11815
Fixes #11840
Fixes #11853
Fixes #11860
Fixes #11883
Fixes #11904
Fixes #7388
Fixes #7425
Fixes #7436
Fixes #7544
Fixes #7882
Fixes #7960
Fixes #8255
Fixes #8307
Fixes #8863
Fixes #8927
Fixes #9192
Fixes #9324
2023-12-24 18:11:05 +00:00
"io/fs"
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
"os"
"path/filepath"
2020-09-09 20:31:43 +00:00
"regexp"
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
"strings"
2019-11-21 12:07:52 +00:00
"time"
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
2023-10-29 09:57:27 +00:00
"github.com/bep/debounce"
2022-12-14 11:20:13 +00:00
"github.com/gohugoio/hugo/common/herrors"
2019-07-31 06:21:17 +00:00
"github.com/gohugoio/hugo/common/loggers"
2024-06-08 09:52:22 +00:00
"github.com/gohugoio/hugo/common/paths"
2019-07-31 06:21:17 +00:00
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
"github.com/spf13/cast"
"github.com/gohugoio/hugo/common/maps"
"github.com/gohugoio/hugo/common/hugo"
"github.com/gohugoio/hugo/parser/metadecoders"
"github.com/gohugoio/hugo/hugofs/files"
all: Rework page store, add a dynacache, improve partial rebuilds, and some general spring cleaning
There are some breaking changes in this commit, see #11455.
Closes #11455
Closes #11549
This fixes a set of bugs (see issue list) and it is also paying some technical debt accumulated over the years. We now build with Staticcheck enabled in the CI build.
The performance should be about the same as before for regular sized Hugo sites, but it should perform and scale much better to larger data sets, as objects that uses lots of memory (e.g. rendered Markdown, big JSON files read into maps with transform.Unmarshal etc.) will now get automatically garbage collected if needed. Performance on partial rebuilds when running the server in fast render mode should be the same, but the change detection should be much more accurate.
A list of the notable new features:
* A new dependency tracker that covers (almost) all of Hugo's API and is used to do fine grained partial rebuilds when running the server.
* A new and simpler tree document store which allows fast lookups and prefix-walking in all dimensions (e.g. language) concurrently.
* You can now configure an upper memory limit allowing for much larger data sets and/or running on lower specced PCs.
We have lifted the "no resources in sub folders" restriction for branch bundles (e.g. sections).
Memory Limit
* Hugos will, by default, set aside a quarter of the total system memory, but you can set this via the OS environment variable HUGO_MEMORYLIMIT (in gigabytes). This is backed by a partitioned LRU cache used throughout Hugo. A cache that gets dynamically resized in low memory situations, allowing Go's Garbage Collector to free the memory.
New Dependency Tracker: Hugo has had a rule based coarse grained approach to server rebuilds that has worked mostly pretty well, but there have been some surprises (e.g. stale content). This is now revamped with a new dependency tracker that can quickly calculate the delta given a changed resource (e.g. a content file, template, JS file etc.). This handles transitive relations, e.g. $page -> js.Build -> JS import, or $page1.Content -> render hook -> site.GetPage -> $page2.Title, or $page1.Content -> shortcode -> partial -> site.RegularPages -> $page2.Content -> shortcode ..., and should also handle changes to aggregated values (e.g. site.Lastmod) effectively.
This covers all of Hugo's API with 2 known exceptions (a list that may not be fully exhaustive):
Changes to files loaded with template func os.ReadFile may not be handled correctly. We recommend loading resources with resources.Get
Changes to Hugo objects (e.g. Page) passed in the template context to lang.Translate may not be detected correctly. We recommend having simple i18n templates without too much data context passed in other than simple types such as strings and numbers.
Note that the cachebuster configuration (when A changes then rebuild B) works well with the above, but we recommend that you revise that configuration, as it in most situations should not be needed. One example where it is still needed is with TailwindCSS and using changes to hugo_stats.json to trigger new CSS rebuilds.
Document Store: Previously, a little simplified, we split the document store (where we store pages and resources) in a tree per language. This worked pretty well, but the structure made some operations harder than they needed to be. We have now restructured it into one Radix tree for all languages. Internally the language is considered to be a dimension of that tree, and the tree can be viewed in all dimensions concurrently. This makes some operations re. language simpler (e.g. finding translations is just a slice range), but the idea is that it should also be relatively inexpensive to add more dimensions if needed (e.g. role).
Fixes #10169
Fixes #10364
Fixes #10482
Fixes #10630
Fixes #10656
Fixes #10694
Fixes #10918
Fixes #11262
Fixes #11439
Fixes #11453
Fixes #11457
Fixes #11466
Fixes #11540
Fixes #11551
Fixes #11556
Fixes #11654
Fixes #11661
Fixes #11663
Fixes #11664
Fixes #11669
Fixes #11671
Fixes #11807
Fixes #11808
Fixes #11809
Fixes #11815
Fixes #11840
Fixes #11853
Fixes #11860
Fixes #11883
Fixes #11904
Fixes #7388
Fixes #7425
Fixes #7436
Fixes #7544
Fixes #7882
Fixes #7960
Fixes #8255
Fixes #8307
Fixes #8863
Fixes #8927
Fixes #9192
Fixes #9324
2023-12-24 18:11:05 +00:00
"golang.org/x/mod/module"
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
"github.com/gohugoio/hugo/config"
"github.com/spf13/afero"
)
var ErrNotExist = errors . New ( "module does not exist" )
const vendorModulesFilename = "modules.txt"
func ( h * Client ) Collect ( ) ( ModulesConfig , error ) {
mc , coll := h . collect ( true )
2019-07-31 06:21:17 +00:00
if coll . err != nil {
return mc , coll . err
}
if err := ( & mc ) . setActiveMods ( h . logger ) ; err != nil {
return mc , err
}
if h . ccfg . HookBeforeFinalize != nil {
if err := h . ccfg . HookBeforeFinalize ( & mc ) ; err != nil {
return mc , err
}
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
2019-07-31 06:21:17 +00:00
if err := ( & mc ) . finalize ( h . logger ) ; err != nil {
return mc , err
}
return mc , nil
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
func ( h * Client ) collect ( tidy bool ) ( ModulesConfig , * collector ) {
2023-01-04 17:24:36 +00:00
if h == nil {
panic ( "nil client" )
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
c := & collector {
Client : h ,
}
c . collect ( )
if c . err != nil {
return ModulesConfig { } , c
}
2019-08-15 14:50:02 +00:00
// https://github.com/gohugoio/hugo/issues/6115
/ * if ! c . skipTidy && tidy {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if err := h . tidy ( c . modules , true ) ; err != nil {
c . err = err
return ModulesConfig { } , c
}
2019-08-15 14:50:02 +00:00
} * /
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
2022-12-19 14:50:53 +00:00
var workspaceFilename string
if h . ccfg . ModuleConfig . Workspace != WorkspaceDisabled {
workspaceFilename = h . ccfg . ModuleConfig . Workspace
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
return ModulesConfig {
2022-12-19 14:50:53 +00:00
AllModules : c . modules ,
GoModulesFilename : c . GoModulesFilename ,
GoWorkspaceFilename : workspaceFilename ,
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
} , c
}
type ModulesConfig struct {
// All active modules.
2023-08-23 10:39:24 +00:00
AllModules Modules
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
// Set if this is a Go modules enabled project.
GoModulesFilename string
2022-12-19 14:50:53 +00:00
// Set if a Go workspace file is configured.
GoWorkspaceFilename string
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
2023-01-04 17:24:36 +00:00
func ( m ModulesConfig ) HasConfigFile ( ) bool {
2023-08-23 10:39:24 +00:00
for _ , mod := range m . AllModules {
2023-01-04 17:24:36 +00:00
if len ( mod . ConfigFilenames ( ) ) > 0 {
return true
}
}
return false
}
2020-10-21 09:17:48 +00:00
func ( m * ModulesConfig ) setActiveMods ( logger loggers . Logger ) error {
2019-07-31 06:21:17 +00:00
for _ , mod := range m . AllModules {
if ! mod . Config ( ) . HugoVersion . IsValid ( ) {
2023-12-30 13:28:35 +00:00
logger . Warnf ( ` Module %q is not compatible with this Hugo version: %s; run "hugo mod graph" for more information. ` , mod . Path ( ) , mod . Config ( ) . HugoVersion )
2019-07-31 06:21:17 +00:00
}
}
return nil
}
2020-10-21 09:17:48 +00:00
func ( m * ModulesConfig ) finalize ( logger loggers . Logger ) error {
2019-07-31 06:21:17 +00:00
for _ , mod := range m . AllModules {
m := mod . ( * moduleAdapter )
m . mounts = filterUnwantedMounts ( m . mounts )
}
return nil
}
func filterUnwantedMounts ( mounts [ ] Mount ) [ ] Mount {
// Remove duplicates
2021-10-25 10:18:00 +00:00
seen := make ( map [ string ] bool )
2019-07-31 06:21:17 +00:00
tmp := mounts [ : 0 ]
for _ , m := range mounts {
2021-10-25 10:18:00 +00:00
if ! seen [ m . key ( ) ] {
2019-07-31 06:21:17 +00:00
tmp = append ( tmp , m )
}
2021-10-25 10:18:00 +00:00
seen [ m . key ( ) ] = true
2019-07-31 06:21:17 +00:00
}
return tmp
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
type collected struct {
// Pick the first and prevent circular loops.
seen map [ string ] bool
// Maps module path to a _vendor dir. These values are fetched from
// _vendor/modules.txt, and the first (top-most) will win.
vendored map [ string ] vendoredModule
// Set if a Go modules enabled project.
gomods goModules
// Ordered list of collected modules, including Go Modules and theme
// components stored below /themes.
modules Modules
}
// Collects and creates a module tree.
type collector struct {
* Client
// Store away any non-fatal error and return at the end.
err error
// Set to disable any Tidy operation in the end.
skipTidy bool
* collected
}
func ( c * collector ) initModules ( ) error {
c . collected = & collected {
seen : make ( map [ string ] bool ) ,
vendored : make ( map [ string ] vendoredModule ) ,
2019-11-14 11:24:55 +00:00
gomods : goModules { } ,
}
2020-09-09 14:51:13 +00:00
// If both these are true, we don't even need Go installed to build.
if c . ccfg . IgnoreVendor == nil && c . isVendored ( c . ccfg . WorkingDir ) {
2019-11-14 11:24:55 +00:00
return nil
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
// We may fail later if we don't find the mods.
return c . loadModules ( )
}
func ( c * collector ) isSeen ( path string ) bool {
key := pathKey ( path )
if c . seen [ key ] {
return true
}
c . seen [ key ] = true
return false
}
func ( c * collector ) getVendoredDir ( path string ) ( vendoredModule , bool ) {
v , found := c . vendored [ path ]
return v , found
}
2023-08-23 10:39:24 +00:00
func ( c * collector ) add ( owner * moduleAdapter , moduleImport Import ) ( * moduleAdapter , error ) {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
var (
mod * goModule
moduleDir string
version string
vendored bool
)
modulePath := moduleImport . Path
var realOwner Module = owner
2020-09-09 14:51:13 +00:00
if ! c . ccfg . shouldIgnoreVendor ( modulePath ) {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if err := c . collectModulesTXT ( owner ) ; err != nil {
return nil , err
}
// Try _vendor first.
var vm vendoredModule
vm , vendored = c . getVendoredDir ( modulePath )
if vendored {
moduleDir = vm . Dir
realOwner = vm . Owner
version = vm . Version
if owner . projectMod {
// We want to keep the go.mod intact with the versions and all.
c . skipTidy = true
}
}
}
if moduleDir == "" {
2021-08-26 15:24:52 +00:00
var versionQuery string
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
mod = c . gomods . GetByPath ( modulePath )
if mod != nil {
moduleDir = mod . Dir
2021-08-26 15:24:52 +00:00
versionQuery = mod . Version
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
if moduleDir == "" {
2019-09-03 10:58:02 +00:00
if c . GoModulesFilename != "" && isProbablyModule ( modulePath ) {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
// Try to "go get" it and reload the module configuration.
2021-08-26 15:24:52 +00:00
if versionQuery == "" {
// See https://golang.org/ref/mod#version-queries
// This will select the latest release-version (not beta etc.).
versionQuery = "upgrade"
}
2024-04-22 08:39:36 +00:00
// Note that we cannot use c.Get for this, as that may
// trigger a new module collection and potentially create a infinite loop.
if err := c . get ( fmt . Sprintf ( "%s@%s" , modulePath , versionQuery ) ) ; err != nil {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
return nil , err
}
if err := c . loadModules ( ) ; err != nil {
return nil , err
}
mod = c . gomods . GetByPath ( modulePath )
if mod != nil {
moduleDir = mod . Dir
}
}
2020-10-29 16:14:04 +00:00
// Fall back to project/themes/<mymodule>
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if moduleDir == "" {
2020-10-29 16:14:04 +00:00
var err error
2021-02-15 10:11:34 +00:00
moduleDir , err = c . createThemeDirname ( modulePath , owner . projectMod || moduleImport . pathProjectReplaced )
2020-10-29 16:14:04 +00:00
if err != nil {
c . err = err
return nil , nil
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if found , _ := afero . Exists ( c . fs , moduleDir ) ; ! found {
all: Rework page store, add a dynacache, improve partial rebuilds, and some general spring cleaning
There are some breaking changes in this commit, see #11455.
Closes #11455
Closes #11549
This fixes a set of bugs (see issue list) and it is also paying some technical debt accumulated over the years. We now build with Staticcheck enabled in the CI build.
The performance should be about the same as before for regular sized Hugo sites, but it should perform and scale much better to larger data sets, as objects that uses lots of memory (e.g. rendered Markdown, big JSON files read into maps with transform.Unmarshal etc.) will now get automatically garbage collected if needed. Performance on partial rebuilds when running the server in fast render mode should be the same, but the change detection should be much more accurate.
A list of the notable new features:
* A new dependency tracker that covers (almost) all of Hugo's API and is used to do fine grained partial rebuilds when running the server.
* A new and simpler tree document store which allows fast lookups and prefix-walking in all dimensions (e.g. language) concurrently.
* You can now configure an upper memory limit allowing for much larger data sets and/or running on lower specced PCs.
We have lifted the "no resources in sub folders" restriction for branch bundles (e.g. sections).
Memory Limit
* Hugos will, by default, set aside a quarter of the total system memory, but you can set this via the OS environment variable HUGO_MEMORYLIMIT (in gigabytes). This is backed by a partitioned LRU cache used throughout Hugo. A cache that gets dynamically resized in low memory situations, allowing Go's Garbage Collector to free the memory.
New Dependency Tracker: Hugo has had a rule based coarse grained approach to server rebuilds that has worked mostly pretty well, but there have been some surprises (e.g. stale content). This is now revamped with a new dependency tracker that can quickly calculate the delta given a changed resource (e.g. a content file, template, JS file etc.). This handles transitive relations, e.g. $page -> js.Build -> JS import, or $page1.Content -> render hook -> site.GetPage -> $page2.Title, or $page1.Content -> shortcode -> partial -> site.RegularPages -> $page2.Content -> shortcode ..., and should also handle changes to aggregated values (e.g. site.Lastmod) effectively.
This covers all of Hugo's API with 2 known exceptions (a list that may not be fully exhaustive):
Changes to files loaded with template func os.ReadFile may not be handled correctly. We recommend loading resources with resources.Get
Changes to Hugo objects (e.g. Page) passed in the template context to lang.Translate may not be detected correctly. We recommend having simple i18n templates without too much data context passed in other than simple types such as strings and numbers.
Note that the cachebuster configuration (when A changes then rebuild B) works well with the above, but we recommend that you revise that configuration, as it in most situations should not be needed. One example where it is still needed is with TailwindCSS and using changes to hugo_stats.json to trigger new CSS rebuilds.
Document Store: Previously, a little simplified, we split the document store (where we store pages and resources) in a tree per language. This worked pretty well, but the structure made some operations harder than they needed to be. We have now restructured it into one Radix tree for all languages. Internally the language is considered to be a dimension of that tree, and the tree can be viewed in all dimensions concurrently. This makes some operations re. language simpler (e.g. finding translations is just a slice range), but the idea is that it should also be relatively inexpensive to add more dimensions if needed (e.g. role).
Fixes #10169
Fixes #10364
Fixes #10482
Fixes #10630
Fixes #10656
Fixes #10694
Fixes #10918
Fixes #11262
Fixes #11439
Fixes #11453
Fixes #11457
Fixes #11466
Fixes #11540
Fixes #11551
Fixes #11556
Fixes #11654
Fixes #11661
Fixes #11663
Fixes #11664
Fixes #11669
Fixes #11671
Fixes #11807
Fixes #11808
Fixes #11809
Fixes #11815
Fixes #11840
Fixes #11853
Fixes #11860
Fixes #11883
Fixes #11904
Fixes #7388
Fixes #7425
Fixes #7436
Fixes #7544
Fixes #7882
Fixes #7960
Fixes #8255
Fixes #8307
Fixes #8863
Fixes #8927
Fixes #9192
Fixes #9324
2023-12-24 18:11:05 +00:00
//lint:ignore ST1005 end user message.
2023-05-18 09:20:39 +00:00
c . err = c . wrapModuleNotFound ( fmt . Errorf ( ` module %q not found in %q; either add it as a Hugo Module or store it in %q. ` , modulePath , moduleDir , c . ccfg . ThemesDir ) )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
return nil , nil
}
}
}
}
if found , _ := afero . Exists ( c . fs , moduleDir ) ; ! found {
2022-05-02 14:07:52 +00:00
c . err = c . wrapModuleNotFound ( fmt . Errorf ( "%q not found" , moduleDir ) )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
return nil , nil
}
if ! strings . HasSuffix ( moduleDir , fileSeparator ) {
moduleDir += fileSeparator
}
ma := & moduleAdapter {
2023-08-23 10:39:24 +00:00
dir : moduleDir ,
vendor : vendored ,
gomod : mod ,
version : version ,
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
// This may be the owner of the _vendor dir
owner : realOwner ,
}
if mod == nil {
ma . path = modulePath
}
if ! moduleImport . IgnoreConfig {
if err := c . applyThemeConfig ( ma ) ; err != nil {
return nil , err
}
}
if err := c . applyMounts ( moduleImport , ma ) ; err != nil {
return nil , err
}
c . modules = append ( c . modules , ma )
return ma , nil
}
2023-08-23 10:39:24 +00:00
func ( c * collector ) addAndRecurse ( owner * moduleAdapter ) error {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
moduleConfig := owner . Config ( )
if owner . projectMod {
if err := c . applyMounts ( Import { } , owner ) ; err != nil {
2023-05-18 11:29:33 +00:00
return fmt . Errorf ( "failed to apply mounts for project: %w" , err )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
}
for _ , moduleImport := range moduleConfig . Imports {
2023-08-23 10:39:24 +00:00
if moduleImport . Disable {
continue
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if ! c . isSeen ( moduleImport . Path ) {
2023-08-23 10:39:24 +00:00
tc , err := c . add ( owner , moduleImport )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if err != nil {
return err
}
2020-09-09 17:08:03 +00:00
if tc == nil || moduleImport . IgnoreImports {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
continue
}
2023-08-23 10:39:24 +00:00
if err := c . addAndRecurse ( tc ) ; err != nil {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
return err
}
}
}
return nil
}
func ( c * collector ) applyMounts ( moduleImport Import , mod * moduleAdapter ) error {
2021-06-28 08:39:52 +00:00
if moduleImport . NoMounts {
mod . mounts = nil
return nil
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
mounts := moduleImport . Mounts
2019-07-30 11:35:16 +00:00
modConfig := mod . Config ( )
if len ( mounts ) == 0 {
// Mounts not defined by the import.
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
mounts = modConfig . Mounts
2019-07-30 11:35:16 +00:00
}
if ! mod . projectMod && len ( mounts ) == 0 {
// Create default mount points for every component folder that
// exists in the module.
for _ , componentFolder := range files . ComponentFolders {
sourceDir := filepath . Join ( mod . Dir ( ) , componentFolder )
_ , err := c . fs . Stat ( sourceDir )
if err == nil {
mounts = append ( mounts , Mount {
Source : componentFolder ,
Target : componentFolder ,
} )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
}
}
var err error
mounts , err = c . normalizeMounts ( mod , mounts )
if err != nil {
return err
}
2020-09-09 20:31:43 +00:00
mounts , err = c . mountCommonJSConfig ( mod , mounts )
if err != nil {
return err
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
mod . mounts = mounts
return nil
}
func ( c * collector ) applyThemeConfig ( tc * moduleAdapter ) error {
var (
configFilename string
2022-03-17 21:03:27 +00:00
themeCfg map [ string ] any
2021-06-16 17:11:01 +00:00
hasConfigFile bool
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
err error
)
2023-01-15 17:45:51 +00:00
LOOP :
for _ , configBaseName := range config . DefaultConfigNames {
for _ , configFormats := range config . ValidConfigFileExtensions {
configFilename = filepath . Join ( tc . Dir ( ) , configBaseName + "." + configFormats )
hasConfigFile , _ = afero . Exists ( c . fs , configFilename )
if hasConfigFile {
break LOOP
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
}
// The old theme information file.
themeTOML := filepath . Join ( tc . Dir ( ) , "theme.toml" )
hasThemeTOML , _ := afero . Exists ( c . fs , themeTOML )
if hasThemeTOML {
data , err := afero . ReadFile ( c . fs , themeTOML )
if err != nil {
return err
}
themeCfg , err = metadecoders . Default . UnmarshalToMap ( data , metadecoders . TOML )
if err != nil {
2020-10-21 09:17:48 +00:00
c . logger . Warnf ( "Failed to read module config for %q in %q: %s" , tc . Path ( ) , themeTOML , err )
2019-08-13 15:15:52 +00:00
} else {
2021-06-09 08:58:18 +00:00
maps . PrepareParams ( themeCfg )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
}
2021-06-16 17:11:01 +00:00
if hasConfigFile {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if configFilename != "" {
var err error
2021-06-16 17:11:01 +00:00
tc . cfg , err = config . FromFile ( c . fs , configFilename )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if err != nil {
2021-08-03 07:57:14 +00:00
return err
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
}
2021-06-16 17:11:01 +00:00
tc . configFilenames = append ( tc . configFilenames , configFilename )
}
// Also check for a config dir, which we overlay on top of the file configuration.
configDir := filepath . Join ( tc . Dir ( ) , "config" )
dcfg , dirnames , err := config . LoadConfigFromDir ( c . fs , configDir , c . ccfg . Environment )
if err != nil {
return err
}
if len ( dirnames ) > 0 {
tc . configFilenames = append ( tc . configFilenames , dirnames ... )
if hasConfigFile {
// Set will overwrite existing keys.
tc . cfg . Set ( "" , dcfg . Get ( "" ) )
} else {
tc . cfg = dcfg
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
2021-06-16 17:11:01 +00:00
config , err := decodeConfig ( tc . cfg , c . moduleConfig . replacementsMap )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if err != nil {
return err
}
const oldVersionKey = "min_version"
if hasThemeTOML {
// Merge old with new
if minVersion , found := themeCfg [ oldVersionKey ] ; found {
if config . HugoVersion . Min == "" {
config . HugoVersion . Min = hugo . VersionString ( cast . ToString ( minVersion ) )
}
}
if config . Params == nil {
2022-03-17 21:03:27 +00:00
config . Params = make ( map [ string ] any )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
for k , v := range themeCfg {
if k == oldVersionKey {
continue
}
config . Params [ k ] = v
}
}
tc . config = config
return nil
}
func ( c * collector ) collect ( ) {
2022-05-09 08:05:19 +00:00
defer c . logger . PrintTimerIfDelayed ( time . Now ( ) , "hugo: collected modules" )
2023-10-29 09:57:27 +00:00
d := debounce . New ( 2 * time . Second )
d ( func ( ) {
2020-10-21 09:17:48 +00:00
c . logger . Println ( "hugo: downloading modules …" )
2019-11-27 08:51:47 +00:00
} )
2023-10-29 09:57:27 +00:00
defer d ( func ( ) { } )
2019-11-27 08:51:47 +00:00
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if err := c . initModules ( ) ; err != nil {
c . err = err
return
}
2019-07-31 06:21:17 +00:00
projectMod := createProjectModule ( c . gomods . GetMain ( ) , c . ccfg . WorkingDir , c . moduleConfig )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
2023-08-23 10:39:24 +00:00
if err := c . addAndRecurse ( projectMod ) ; err != nil {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
c . err = err
return
}
2019-07-31 08:31:26 +00:00
// Add the project mod on top.
c . modules = append ( Modules { projectMod } , c . modules ... )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
2019-11-14 11:24:55 +00:00
func ( c * collector ) isVendored ( dir string ) bool {
_ , err := c . fs . Stat ( filepath . Join ( dir , vendord , vendorModulesFilename ) )
return err == nil
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
func ( c * collector ) collectModulesTXT ( owner Module ) error {
vendorDir := filepath . Join ( owner . Dir ( ) , vendord )
filename := filepath . Join ( vendorDir , vendorModulesFilename )
f , err := c . fs . Open ( filename )
if err != nil {
2022-12-14 11:20:13 +00:00
if herrors . IsNotExist ( err ) {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
return nil
}
return err
}
defer f . Close ( )
scanner := bufio . NewScanner ( f )
for scanner . Scan ( ) {
// # github.com/alecthomas/chroma v0.6.3
line := scanner . Text ( )
line = strings . Trim ( line , "# " )
line = strings . TrimSpace ( line )
parts := strings . Fields ( line )
if len ( parts ) != 2 {
2022-05-02 14:07:52 +00:00
return fmt . Errorf ( "invalid modules list: %q" , filename )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
path := parts [ 0 ]
2021-02-14 18:24:13 +00:00
shouldAdd := c . Client . moduleConfig . VendorClosest
if ! shouldAdd {
if _ , found := c . vendored [ path ] ; ! found {
shouldAdd = true
}
}
if shouldAdd {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
c . vendored [ path ] = vendoredModule {
Owner : owner ,
Dir : filepath . Join ( vendorDir , path ) ,
Version : parts [ 1 ] ,
}
}
}
return nil
}
func ( c * collector ) loadModules ( ) error {
modules , err := c . listGoMods ( )
if err != nil {
return err
}
c . gomods = modules
return nil
}
2020-09-09 20:31:43 +00:00
// Matches postcss.config.js etc.
var commonJSConfigs = regexp . MustCompile ( ` (babel|postcss|tailwind)\.config\.js ` )
func ( c * collector ) mountCommonJSConfig ( owner * moduleAdapter , mounts [ ] Mount ) ( [ ] Mount , error ) {
for _ , m := range mounts {
if strings . HasPrefix ( m . Target , files . JsConfigFolderMountPrefix ) {
// This follows the convention of the other component types (assets, content, etc.),
2020-12-16 11:11:32 +00:00
// if one or more is specified by the user, we skip the defaults.
2020-09-09 20:31:43 +00:00
// These mounts were added to Hugo in 0.75.
return mounts , nil
}
}
// Mount the common JS config files.
all: Rework page store, add a dynacache, improve partial rebuilds, and some general spring cleaning
There are some breaking changes in this commit, see #11455.
Closes #11455
Closes #11549
This fixes a set of bugs (see issue list) and it is also paying some technical debt accumulated over the years. We now build with Staticcheck enabled in the CI build.
The performance should be about the same as before for regular sized Hugo sites, but it should perform and scale much better to larger data sets, as objects that uses lots of memory (e.g. rendered Markdown, big JSON files read into maps with transform.Unmarshal etc.) will now get automatically garbage collected if needed. Performance on partial rebuilds when running the server in fast render mode should be the same, but the change detection should be much more accurate.
A list of the notable new features:
* A new dependency tracker that covers (almost) all of Hugo's API and is used to do fine grained partial rebuilds when running the server.
* A new and simpler tree document store which allows fast lookups and prefix-walking in all dimensions (e.g. language) concurrently.
* You can now configure an upper memory limit allowing for much larger data sets and/or running on lower specced PCs.
We have lifted the "no resources in sub folders" restriction for branch bundles (e.g. sections).
Memory Limit
* Hugos will, by default, set aside a quarter of the total system memory, but you can set this via the OS environment variable HUGO_MEMORYLIMIT (in gigabytes). This is backed by a partitioned LRU cache used throughout Hugo. A cache that gets dynamically resized in low memory situations, allowing Go's Garbage Collector to free the memory.
New Dependency Tracker: Hugo has had a rule based coarse grained approach to server rebuilds that has worked mostly pretty well, but there have been some surprises (e.g. stale content). This is now revamped with a new dependency tracker that can quickly calculate the delta given a changed resource (e.g. a content file, template, JS file etc.). This handles transitive relations, e.g. $page -> js.Build -> JS import, or $page1.Content -> render hook -> site.GetPage -> $page2.Title, or $page1.Content -> shortcode -> partial -> site.RegularPages -> $page2.Content -> shortcode ..., and should also handle changes to aggregated values (e.g. site.Lastmod) effectively.
This covers all of Hugo's API with 2 known exceptions (a list that may not be fully exhaustive):
Changes to files loaded with template func os.ReadFile may not be handled correctly. We recommend loading resources with resources.Get
Changes to Hugo objects (e.g. Page) passed in the template context to lang.Translate may not be detected correctly. We recommend having simple i18n templates without too much data context passed in other than simple types such as strings and numbers.
Note that the cachebuster configuration (when A changes then rebuild B) works well with the above, but we recommend that you revise that configuration, as it in most situations should not be needed. One example where it is still needed is with TailwindCSS and using changes to hugo_stats.json to trigger new CSS rebuilds.
Document Store: Previously, a little simplified, we split the document store (where we store pages and resources) in a tree per language. This worked pretty well, but the structure made some operations harder than they needed to be. We have now restructured it into one Radix tree for all languages. Internally the language is considered to be a dimension of that tree, and the tree can be viewed in all dimensions concurrently. This makes some operations re. language simpler (e.g. finding translations is just a slice range), but the idea is that it should also be relatively inexpensive to add more dimensions if needed (e.g. role).
Fixes #10169
Fixes #10364
Fixes #10482
Fixes #10630
Fixes #10656
Fixes #10694
Fixes #10918
Fixes #11262
Fixes #11439
Fixes #11453
Fixes #11457
Fixes #11466
Fixes #11540
Fixes #11551
Fixes #11556
Fixes #11654
Fixes #11661
Fixes #11663
Fixes #11664
Fixes #11669
Fixes #11671
Fixes #11807
Fixes #11808
Fixes #11809
Fixes #11815
Fixes #11840
Fixes #11853
Fixes #11860
Fixes #11883
Fixes #11904
Fixes #7388
Fixes #7425
Fixes #7436
Fixes #7544
Fixes #7882
Fixes #7960
Fixes #8255
Fixes #8307
Fixes #8863
Fixes #8927
Fixes #9192
Fixes #9324
2023-12-24 18:11:05 +00:00
d , err := c . fs . Open ( owner . Dir ( ) )
if err != nil {
return mounts , fmt . Errorf ( "failed to open dir %q: %q" , owner . Dir ( ) , err )
}
defer d . Close ( )
fis , err := d . ( fs . ReadDirFile ) . ReadDir ( - 1 )
2020-09-09 20:31:43 +00:00
if err != nil {
2023-01-04 17:24:36 +00:00
return mounts , fmt . Errorf ( "failed to read dir %q: %q" , owner . Dir ( ) , err )
2020-09-09 20:31:43 +00:00
}
for _ , fi := range fis {
n := fi . Name ( )
should := n == files . FilenamePackageHugoJSON || n == files . FilenamePackageJSON
should = should || commonJSConfigs . MatchString ( n )
if should {
mounts = append ( mounts , Mount {
Source : n ,
Target : filepath . Join ( files . ComponentFolderAssets , files . FolderJSConfig , n ) ,
} )
}
}
return mounts , nil
}
2019-12-19 11:17:44 +00:00
func ( c * collector ) normalizeMounts ( owner * moduleAdapter , mounts [ ] Mount ) ( [ ] Mount , error ) {
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
var out [ ] Mount
dir := owner . Dir ( )
for _ , mnt := range mounts {
errMsg := fmt . Sprintf ( "invalid module config for %q" , owner . Path ( ) )
if mnt . Source == "" || mnt . Target == "" {
return nil , errors . New ( errMsg + ": both source and target must be set" )
}
mnt . Source = filepath . Clean ( mnt . Source )
mnt . Target = filepath . Clean ( mnt . Target )
2019-12-19 11:17:44 +00:00
var sourceDir string
if owner . projectMod && filepath . IsAbs ( mnt . Source ) {
// Abs paths in the main project is allowed.
sourceDir = mnt . Source
} else {
sourceDir = filepath . Join ( dir , mnt . Source )
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
// Verify that Source exists
_ , err := c . fs . Stat ( sourceDir )
if err != nil {
2024-06-08 09:52:22 +00:00
if paths . IsSameFilePath ( sourceDir , c . ccfg . PublishDir ) {
// This is a little exotic, but there are use cases for mounting the public folder.
// This will typically also be in .gitingore, so create it.
if err := c . fs . MkdirAll ( sourceDir , 0 o755 ) ; err != nil {
return nil , fmt . Errorf ( "%s: %q" , errMsg , err )
}
} else if strings . HasSuffix ( sourceDir , files . FilenameHugoStatsJSON ) {
2023-07-19 08:28:56 +00:00
// A common pattern for Tailwind 3 is to mount that file to get it on the server watch list.
// A common pattern is also to add hugo_stats.json to .gitignore.
// Create an empty file.
f , err := c . fs . Create ( sourceDir )
if err != nil {
return nil , fmt . Errorf ( "%s: %q" , errMsg , err )
}
f . Close ( )
} else {
2024-06-25 13:03:27 +00:00
// TODO(bep) commenting out for now, as this will create to much noise.
// c.logger.Warnf("module %q: mount source %q does not exist", owner.Path(), sourceDir)
2023-07-19 08:28:56 +00:00
continue
}
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
// Verify that target points to one of the predefined component dirs
targetBase := mnt . Target
idxPathSep := strings . Index ( mnt . Target , string ( os . PathSeparator ) )
if idxPathSep != - 1 {
targetBase = mnt . Target [ 0 : idxPathSep ]
}
if ! files . IsComponentFolder ( targetBase ) {
2022-05-02 14:07:52 +00:00
return nil , fmt . Errorf ( "%s: mount target must be one of: %v" , errMsg , files . ComponentFolders )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
out = append ( out , mnt )
}
return out , nil
}
func ( c * collector ) wrapModuleNotFound ( err error ) error {
2022-05-02 14:07:52 +00:00
err = fmt . Errorf ( err . Error ( ) + ": %w" , ErrNotExist )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
if c . GoModulesFilename == "" {
return err
}
baseMsg := "we found a go.mod file in your project, but"
switch c . goBinaryStatus {
case goBinaryStatusNotFound :
2022-05-02 14:07:52 +00:00
return fmt . Errorf ( baseMsg + " you need to install Go to use it. See https://golang.org/dl/ : %q" , err )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
case goBinaryStatusTooOld :
2022-05-02 14:07:52 +00:00
return fmt . Errorf ( baseMsg + " you need to a newer version of Go to use it. See https://golang.org/dl/ : %w" , err )
Add Hugo Modules
This commit implements Hugo Modules.
This is a broad subject, but some keywords include:
* A new `module` configuration section where you can import almost anything. You can configure both your own file mounts nd the file mounts of the modules you import. This is the new recommended way of configuring what you earlier put in `configDir`, `staticDir` etc. And it also allows you to mount folders in non-Hugo-projects, e.g. the `SCSS` folder in the Bootstrap GitHub project.
* A module consists of a set of mounts to the standard 7 component types in Hugo: `static`, `content`, `layouts`, `data`, `assets`, `i18n`, and `archetypes`. Yes, Theme Components can now include content, which should be very useful, especially in bigger multilingual projects.
* Modules not in your local file cache will be downloaded automatically and even "hot replaced" while the server is running.
* Hugo Modules supports and encourages semver versioned modules, and uses the minimal version selection algorithm to resolve versions.
* A new set of CLI commands are provided to manage all of this: `hugo mod init`, `hugo mod get`, `hugo mod graph`, `hugo mod tidy`, and `hugo mod vendor`.
All of the above is backed by Go Modules.
Fixes #5973
Fixes #5996
Fixes #6010
Fixes #5911
Fixes #5940
Fixes #6074
Fixes #6082
Fixes #6092
2019-05-03 07:16:58 +00:00
}
return err
}
type vendoredModule struct {
Owner Module
Dir string
Version string
}
func createProjectModule ( gomod * goModule , workingDir string , conf Config ) * moduleAdapter {
// Create a pseudo module for the main project.
var path string
if gomod == nil {
path = "project"
}
return & moduleAdapter {
path : path ,
dir : workingDir ,
gomod : gomod ,
projectMod : true ,
config : conf ,
}
}
// In the first iteration of Hugo Modules, we do not support multiple
// major versions running at the same time, so we pick the first (upper most).
// We will investigate namespaces in future versions.
// TODO(bep) add a warning when the above happens.
func pathKey ( p string ) string {
prefix , _ , _ := module . SplitPathVersion ( p )
return strings . ToLower ( prefix )
}