mirror of
https://github.com/Brandon-Rozek/website.git
synced 2024-11-22 16:26:28 -05:00
59 lines
2.2 KiB
Markdown
59 lines
2.2 KiB
Markdown
|
---
|
||
|
|
title: "DHCP for Raspberry Pi"
|
||
|
|
date: 2021-02-15T22:46:21-05:00
|
||
|
|
draft: false
|
||
|
|
tags: []
|
||
|
|
---
|
||
|
|
|
||
|
|
Recently I ran across the use case where I needed a Raspberry Pi to be connected to the Internet via a WiFI connection, while also providing DHCP leases through an Ethernet connection. I couldn't find a great way to achieve this with `dhcpcd` so instead I grabbed a tool that I'm more familiar with `dnsmasq`.
|
||
|
|
|
||
|
|
Before we begin, we need to setup a static IP for the Ethernet interface (`eth0`). Since the Ethernet interface will not be connected to the Internet, there's no need to worry about a lot of the usual fields.
|
||
|
|
|
||
|
|
In `/etc/dhcpcd.conf`
|
||
|
|
|
||
|
|
```
|
||
|
|
interface eth0
|
||
|
|
fallback nodhcp
|
||
|
|
|
||
|
|
profile nodhcp
|
||
|
|
static ip_address=192.168.2.1/24
|
||
|
|
```
|
||
|
|
|
||
|
|
Below is the config for `dnsmasq` which lives in `/etc/dnsmasq.conf`. It essentially tells it to only serve DHCP leases on the Ethernet connection of the Raspberry Pi. The addresses it'll lease out according to the config below is between 192.168.0.50-192.168.0.150 and is leased for 12 hours.
|
||
|
|
|
||
|
|
```
|
||
|
|
# Configuration file for dnsmasq.
|
||
|
|
#
|
||
|
|
# Format is one option per line, legal options are the same
|
||
|
|
# as the long options legal on the command line. See
|
||
|
|
# "/usr/sbin/dnsmasq --help" or "man 8 dnsmasq" for details.
|
||
|
|
|
||
|
|
# Listen on this specific port instead of the standard DNS port
|
||
|
|
# (53). Setting this to zero completely disables DNS function,
|
||
|
|
# leaving only DHCP and/or TFTP.
|
||
|
|
port=0
|
||
|
|
|
||
|
|
# If you want dnsmasq to listen for DHCP and DNS requests only on
|
||
|
|
# specified interfaces (and the loopback) give the name of the
|
||
|
|
# interface (eg eth0) here.
|
||
|
|
# Repeat the line for more than one interface.
|
||
|
|
interface=eth0
|
||
|
|
# Or you can specify which interface _not_ to listen on
|
||
|
|
#except-interface=
|
||
|
|
# Or which to listen on by address (remember to include 127.0.0.1 if
|
||
|
|
# you use this.)
|
||
|
|
#listen-address=
|
||
|
|
|
||
|
|
# Uncomment this to enable the integrated DHCP server, you need
|
||
|
|
# to supply the range of addresses available for lease and optionally
|
||
|
|
# a lease time. If you have more than one network, you will need to
|
||
|
|
# repeat this for each network on which you want to supply DHCP
|
||
|
|
# service.
|
||
|
|
dhcp-range=192.168.0.50,192.168.0.150,12h
|
||
|
|
|
||
|
|
# Enable DHCPv6. Note that the prefix-length does not need to be specified
|
||
|
|
# and defaults to 64 if missing/
|
||
|
|
#dhcp-range=1234::2, 1234::500, 64, 12h
|
||
|
|
```
|
||
|
|
|